Philips OLED769 vs Philips PML8709

Philips OLED769 performs quite well, especially in movie scenes with small light points. The television surprises with its brightness, reaching around 800 nits, which is an impressive result. This means that small light sources, like street lamps at night or stars in the sky, are vivid and full of detail. However, the biggest challenge for this model is the scene with a full-screen sun glare. In such moments, the brightness drops to around 250 nits, which isn’t very impressive. This is a typical issue with cheaper OLED displays, which struggle to maintain high brightness across the entire screen.

Looking at the contrast results, we expected that the algorithms responsible for the zones in the Philips PML8709 would be at least decent. However, what we encountered during testing is difficult to explain. The average brightness we managed to achieve was just 350 nits, which is definitely too low to fully enjoy HDR effects. In practice, the TV barely stands out compared to an average SDR. The situation becomes even more surprising in test scenes, such as the second one from the movie Life of Pi or Sicario 2. Small light elements achieve just 120 nits there, making them practically imperceptible. Such a level of brightness is completely below modern HDR standards and significantly diminishes the experience of watching high-quality content. The only bright spot in this category is the very good coverage of wide color gamuts – DCI-P3 at 97% and BT.2020 at 83%. This ensures that colors are saturated and well-reproduced, which can somewhat improve the overall experience of watching HDR materials. However, the lack of adequate brightness means that even this cannot save the Philips PML8709 in this category.

The "Film" mode turned out to be the best factory setting in terms of fidelity to the original material, and it was on this setting that we based our tests. However, like other factory modes, it was not without its flaws. Let’s take a closer look at what exactly went wrong in the SDR and HDR materials.

In both cases, the white balance was disturbed by excessive dominance of green and red colours. This phenomenon created a yellowish tint that spilled over the entire image, leading to issues such as yellowed whites and unnatural skin tones. These problems were clearly highlighted on the "ColourChecker" palette, where each of the samples was shifted towards warmer shades.

As for contrast and brightness, in the Philips OLED769, we can look at two key graphs: Gamma for HD content and the EOTF curve for 4K HDR content. In the case of the first graph, the gamma value is below the optimal level of 2.4, resulting in the bright parts of the image being lightened. This means that bright elements may be somewhat overexposed, losing detail and depth. Meanwhile, the EOTF curve for 4K HDR content performs really well. The graph shows that the television effectively reproduces details in both the brightest and darkest parts of the image, translating to a realistic and dynamic representation of scenes.

Though theoretically the Filmmaker mode in the Philips PML8709 should provide natural colour reproduction, in reality it resembles a store mode more. In the white balance, both for HD and 4K content, there is a clear dominance of blue. This causes the image to appear washed out and cold, which is particularly noticeable in the comparative image below.

The brightness characteristics also leave much to be desired. Both gamma and the EOTF curve exhibit excessive screen brightness. As a result, there is a loss of detail in both the brighter and darker areas of the image, further diminishing its credibility and naturalness. Bright elements appear unnaturally flat and little varied.

These significant issues with white balance and brightness characteristics lead to noticeable errors in colour reproduction, which can easily be seen in films as well as the Colour Checker test. The colours are inaccurate, affecting the overall image quality and visual experience. The factory settings require significant improvement in order to fully enjoy the potential of this television.

After professional calibration, Philips OLED769 truly shines in terms of colour accuracy. The television has been completely rid of any yellow tint in both HD and 4K content. The Colour Checker test confirms that deltaE errors are minimal, occasionally exceeding 2, which means we can talk about almost perfect renderings of the director's vision.

When it comes to contrast, the situation is equally impressive. For 4K materials, there wasn't much to improve from the start, while the gamma graph has been significantly enhanced. As a result, dark and bright parts of the image are represented with greater accuracy, leading to realistic and dynamic scene reproduction.

The calibration has unlocked the full potential of this television, both in terms of colour and contrast. Philips OLED769 now offers vivid, natural images of high quality that will delight any user, whether they're watching movies or using other multimedia.

Philips offers advanced image calibration tools in its televisions, which we decided to fully utilise. The results? Although we managed to improve many aspects, it wasn't without difficulties. White balance was one of the biggest challenges – despite our efforts, it could be called fighting against windmills. We were able to significantly correct it, so the picture now looks much better than in the factory settings, but it is still far from perfect. Especially in some scenes, a subtle dominance of blue is visible, although not as intense as before. We achieved a significant improvement in brightness characteristics – gamma now appears much more stable. The EOTF curve looks correct at first glance, however, when analysing movie content, it is evident that the television has trouble maintaining the proper characteristics. The algorithms are "struggling", trying to adjust brightness, which may be due to the limited number of dimming zones that do not always handle more complex scenes well. Overall, the picture after calibration looks much more pleasing to the eye – colors are more natural, and colour reproduction errors have been minimised. Although it is still not perfect, the Philips PML8709 now presents itself much better than in the factory settings.

When it comes to lower quality materials, the distortion reduction in the Philips OLED769 does well at smoothing tonal transitions, especially at the minimum setting. It's worth noting that at this setting, film grain isn't blurred, which is a pleasant surprise, as such negative phenomena often occur with other manufacturers. Overall, it's quite a decent solution. However, it should be noted that this setting doesn't work in HDR mode, where gradation issues are much more pronounced. In HDR mode, the television struggles with smoothing tonal transitions and may present more noticeable distortions and noise, reducing image quality in dynamic scenes.

As for digital processing, the Philips OLED769 performs well. The model in the picture isn’t overly jagged, and the branches in the background lack the characteristic artifacts. The television achieves this effect by avoiding artificial sharpening, which may be an advantage for some users. However, others may find this less appealing, as they prefer a more vivid, sharper image rather than a subtle effect. This effect can be mitigated by using a higher setting for the "Sharpness" parameter.

The distortion reduction feature in the Philips PML8709 smooths tonal transitions, but its effectiveness leaves much to be desired. We recommend setting this option to "Medium" - at this level, the effect is noticeable but not excessive. Unfortunately, compared to other Philips models, the smoothing effect is less effective, meaning that certain tonal transitions may still appear somewhat uneven. An additional drawback is that this feature also smooths other details, such as the textures of materials like shirts, which can affect image sharpness.

As for image scaling, the television performs very well. The image appears smooth and free of noticeable "jaggies". This effect may appeal to many users, although some might prefer a more vivid look. Fortunately, the television allows for adjustment of the sharpness parameter, enabling us to tailor the image to individual preferences.

Philips OLED769 features a multi-level motion smoother called "Motion Style," which will please users who value the ability to adjust motion fluidity in films. With this function, the image can be set to appear more stuttery or fluid, reminiscent of a theatrical effect. It's a great solution for those who want to tailor the displayed content to their visual preferences. Gamers will also not be disappointed, as the television, like most OLEDs, is equipped with a 120Hz panel. This ensures extraordinary fluidity and dynamic imagery. Unfortunately, Philips OLED769 does not have the BFI (Black Frame Insertion) feature, which could further enhance the smoothness and clarity of motion. Despite this limitation, the television still offers excellent visual experiences for both cinema lovers and gamers. This is definitely one of its strong points.

Philips PML8709 is one of the few models with mini-LED technology on the market, offering a refresh rate of 60 Hz. While it’s not a panel for the most demanding gamers, it should satisfy those who mainly watch movies. The TV is equipped with a “Motion Style” feature, which is a motion smoother that allows you to adjust the fluidity of motion according to your preferences – from a more “plastic” look to a cinematic aesthetic with clearly visible frames.

Philips OLED769 has been designed with gamers in mind, offering full compatibility with consoles and the highest quality gameplay. The television received the maximum rating in this category, providing everything your heart desires. With HDMI 2.1 ports fully supporting ALLM (Auto Low Latency Mode) and VRR (Variable Refresh Rate), the TV ensures smooth and hassle-free gaming. ALLM automatically switches the television to low latency mode, and VRR eliminates stuttering and screen tearing, resulting in smoothness and stability in gameplay. The Dolby Vision feature for gamers is another advantage, although it only works at 60 Hz. Most casual gamers will probably not feel the lack of a higher refresh rate, however, more demanding users may have some reservations. It allows for enjoying a dynamic range of tones and realistic images, enhancing the gaming experience. PC gamers will also not be disappointed, as the Philips OLED769 offers full compatibility with Nvidia graphics cards, thanks to support for G-Sync. This technology synchronizes the TV's refresh rate with the graphics card, eliminating tearing and stuttering, leading to excellent image smoothness.

Philips OLED769 is a television that perfectly meets the needs of gamers, offering a wide range of advanced features and technologies that significantly enhance game quality and user comfort.

Philips PML8709 is a television aimed more at casual gamers, mainly due to the 60 Hz panel, which won’t meet the expectations of the most demanding users. However, for those who appreciate gaming at a more moderate pace, this model may prove sufficient.

The television offers several gamer-friendly features, such as ALLM (automatic switching to game mode) and VRR (variable refresh rate), which help in providing smoother image display without annoying stutters. Furthermore, in terms of HDR, we find the implementation of HGiG, which adjusts the HDR effect to the specifics of games, ensuring a more natural image in appropriately optimised titles. Unfortunately, there is no support for Dolby Vision mode, which may be noticeable in games that utilise this format.

A nice addition is the presence of a basic "Game Bar," which allows for quick previewing and modification of the most important settings related to gaming. It’s a simple but useful touch, especially for those who frequently change their configuration between different types of gameplay. Despite some limitations, the Philips PML8709 offers a solid set of features for less demanding gamers.