Philips MLED920 / MLED910 vs SHARP JP7765E

Philips MLED920 in our measurements in static tests even reached around 900 nits, which for a mid-range model is quite an impressive result. In practice, this translates to a lot of satisfaction during viewing – in scenes rich in bright light, such as the first, third, or fifth test patterns, the screen was able to generate around 700 nits, which is sufficient to feel the real "HDR effect". However, it cannot be denied that the limited number of backlight zones and the typical mini-LED compromises in dimming algorithms reveal their flaws in more demanding scenes. In sequences with small light sources – like the moon or a scene from the film Sicario 2 – the television clearly prioritises maintaining deeper blacks at the expense of the brightness of these small elements. For most viewers, this is still a reasonable compromise, as the dark background looks much better, although it should be noted that the details themselves may not dazzle with intensity. The question of colours also leaves a bit to be desired. Although the employed PFS filter (the equivalent of quantum dots known from QLEDs) does its job and the colours appear quite vibrant, the coverage of the DCI-P3 colour space reaches "only" 90%. In everyday viewing, this will be sufficient, but in extremely colourful productions – like the latest Disney animations – one can notice that some tones are not as vivid as they could be in other constructions.

So how does the brightness of the Sharp JP7 perform in the most demanding titles? Honestly, we were quite surprised at first. The TV is able to achieve over 1000 nits of brightness, which is an outstanding and rare result for a device costing just under 2000 zł (for 55 inches). Watching bright, full-screen scenes, you can get the impression that you are dealing with really good equipment. But unfortunately, we have to return to the issue we mentioned earlier, which is local dimming management. When small, bright spots appear on a dark background (like in test scenes from the films Life of Pi or Sicario 2), it’s clear how poorly the JP7 handles these zones. The TV dims them almost to the maximum, crushing the whole HDR effect, which at such moments resembles a flat SDR image (less than 200 nits). This instability means that in demanding, contrast-rich films, the image on the JP7 unfortunately loses its appeal.

As a consolation, it's worth noting that the panel has the potential to display colours well. A PFS (phosphor) filter has been employed here, which allows the coverage of the DCI-P3 colour gamut to reach a solid 94%. The manufacturer calls its product a “QLED,” even though it technologically relies mainly on the aforementioned PFS filter. Considering the recent market battles between manufacturers over what can and cannot be called QLED, we leave the issue of the correctness of this terminology to your judgement. However, it remains a fact that the potential for reproducing saturated colours in this panel is simply good.

Like every Philips TV we've tested, the MLED920 was primarily assessed in Filmmaker mode – the so-called "most honest" mode, designed for films and to faithfully convey the intentions of the creators. Indeed, in terms of colour accuracy, it performs best among all the modes available on the TV, but it is not without flaws. The first thing that stands out is the white balance. The image has a slight tendency towards purple-pink tones, giving it a somewhat unnatural character. However, an even bigger problem turned out to be what we mentioned earlier – image clipping. Just looking at the gamma or EOTF charts reveals that the line deviates significantly from the norm, dropping below a value of 1.8. In practice, this means "bleeding" of the brightest whites, where the image becomes almost milky. Fortunately, most of these issues can be corrected – the MLED920 responds to calibration, and with a few adjustments, image quality can be significantly improved.

When it comes to colours straight out of the box, the Sharp JP7 was tested in the Film mode, which traditionally offers the most cohesive image compared to the yellowed “Eco” mode or the glaring blue of the “Dynamic” mode. Although this is the best choice among the available settings, the results still fall short of ideal. The white balance clearly lacked red and blue components, causing many scenes to take on an unnatural, greenish hue. Another issue was the gamma – in full-screen scenes, the TV produced excessively bright images, completely robbing it of its cinematic character. All of this resulted in colour reproduction errors, especially in shades of grey, which exceeded the Delta E 10 value. To remind you: errors above 2-3 are already noticeable to the human eye, so here we are dealing with a significant distortion of reality.

In HDR mode, the situation is reversed, but not in a better way. Here, the white balance is dominated by blue, giving the image an unnatural, almost “store-like” sharpness, reminiscent of aggressive demonstration modes. Moreover, the measurements of the EOTF curve emphasise the store-like nature of the image. The graph clearly shows that the TV generates images that are significantly brighter than the standards predict, resulting in an artificially boosted and unrealistic final effect. The Sharp JP7 is evidently trying to appear stronger than it actually is, but it does so at the expense of fidelity to the original content.

After calibration, we managed to largely tame the white balance – to the extent that the average viewer will not be able to detect colour inaccuracies. The characteristic pink-purple glow that previously disrupted the naturalness of the image has also disappeared. The colour palette has been organised, and the colours appear more cohesive and neutral. The gamma in SDR content looks really good after calibration – there’s no sign of the earlier “bleeding” effect in bright scenes. The image has become more contrasty and free from the milky effect that previously severely affected the viewing experience. In the case of HDR content, the improvement is also noticeable, although here it is still evident that the television goes “its own way”. The EOTF curve cannot be fully adjusted, as Philips simply does not offer tools for precise control of this parameter in its settings. In many films, the television still exposes the image “in its own way”. Despite these limitations, calibration has brought a lot of good – the majority of colour inaccuracies have been minimised and the overall image balance has significantly improved. However, one must remember that certain barriers arise from the very hardware construction and simply cannot be overcome.

We subjected the JP7 to our standard calibration procedure and honestly... the television gained a second life thanks to it, especially with SDR content (YouTube, traditional television, series, or older films). With our precise adjustments to the white balance and stabilisation of the gamma, colour errors dropped to a value of below 3. This is a level at which the human eye struggles to perceive discrepancies. In this scenario, the Sharp JP7 delivers an image with truly excellent colour accuracy, which is a significant advantage in this price range. However, the HDR content turned out to be much more problematic. Here, despite our efforts and interventions in the settings, the television simply refused to cooperate. In the JP7 menu, we won’t find any option to effectively control how brightness is managed (EOTF). Although a significant portion of the colour errors has been reduced, the image still remained unnaturally oversaturated. It’s a bit disappointing because the potential of the mini-LED backlit panel is great, but the software presents a clear barrier.

The conclusion is simple: when watching less demanding content (SDR) on the JP7, you can expect an image that is more than satisfactory, but in HDR you will have to accept a certain degree of "artificiality" that cannot be bypassed even with professional equipment.

The manufacturer has equipped this model with several features that improve signal quality, and although we usually approach such “enhancers” with caution, here they prove to be really helpful. The key option is called “distortion reduction” – it works best at a medium level because, on one hand, it effectively smooths out unwanted steps and colour transitions, and on the other, it doesn’t excessively cut details, meaning the image still looks natural.

It’s a bit worse when it comes to upscaling. Lower quality materials – such as the test video with the model – appeared soft and lacking sharpness. Of course, it can be partially adjusted with the sharpness slider in the menu, but the result still falls short compared to what competitors offer at a similar price. Philips still needs to work on this aspect because, in light of the successful improvement of tonal transitions, the upscaling simply comes off weak.

When it comes to lower quality materials and how Sharp JP7 handles them, the situation is ambiguous. Let's start with the upscaling itself – here we have no major objections. The process of scaling the image to a higher resolution is correct; the picture remains readable and clear, without the overscan effect, which means no cropped edges. Of course, it's not at the level of top models and at times you can notice slight tearing on the edges, but in this price range, the effect is fully acceptable.

However, the actual digital image processing performs much worse, as aside from the scaling, it practically doesn’t exist. In the JP7 menu, we won’t find any options that would effectively smooth out unwanted tonal transitions or reduce noise in the image. As a result, the signal hits the panel in a very raw form, which with heavily compressed materials (e.g., from YouTube) results in noticeable posterisation. Either this is a programming error or a very strange design decision, because in earlier Sharp models this function was available and, more importantly, worked with noticeable effect. Here, we are stuck with what the source delivers, without any digital support from the image processor.

Philips MLED920 features a 144 Hz panel, which immediately suggests that we shouldn’t complain about motion smoothness. And indeed – for a VA panel, the motion blur is relatively low here, and while you can sometimes notice slight issues on darker backgrounds, they’re not something that will catch the eye of most people during regular viewing.

A big plus is also the presence of a motion smoother called “Motion Style.” It allows you to adjust the smoothness to your own preferences – if someone prefers a more “theatrical,” almost television-like character of the image, they can increase the sliders, and if they want to maintain the natural “judders” of a cinematic frame, they just need to set lower values. This way, everyone can find a happy medium.

The motion fluidity on the Sharp JP7 is quite average, and the reason is simple: the TV uses a 60Hz panel. This immediately makes it hard to recommend for watching sports or serious gaming, where higher refresh rates are already the standard. The only real plus is the presence of a motion smoother, which we can control in films with a slider called De-judder. Lower settings give a more raw, “cinematic” (framey) image, while higher ones add artificial fluidity. We suggest setting it somewhere in the middle of the scale, around 3-5 – this is the best compromise to avoid the soap opera effect while also getting rid of the annoying image skipping. Interestingly, in the menu, we also find a slider for "motion blur reduction," which usually indicates the presence of a 120Hz panel. However, in the case of the JP7, it doesn’t actually enhance the image and serves more as a dummy – it looks good in the settings, but technically it shouldn’t work on this panel.

For gamers, the Philips MLED920 is truly a complete tool. The manufacturer has taken care of everything that is now considered standard in televisions for consoles and PCs. It has ALLM, so the console automatically switches the screen to game mode, there’s VRR and a 144 Hz refresh rate that ensures smooth gameplay even in fast-paced titles. All key HDR formats are supported – including HGiG and Dolby Vision Gaming for Xbox – which means that regardless of what you’re playing and on which console, the television will be able to extract the maximum potential from the image. In everyday gaming, the Game Bar proves useful too – a relatively simple implementation by Philips, but a functional panel where you can quickly check image parameters, enable VRR, or adjust details without leaving the game. It’s not as elaborate as the competition, but it does its job without any complaints. And finally, something that sets Philips apart from the competition – Ambilight. The three-sided LED backlighting can make a huge impression in games, especially in the evening. It’s also a way to slightly 'expand' the screen and create a greater sense of immersion. And since coloured LEDs have recently become almost an essential element of a gamer’s room, the MLED920 fits perfectly into this trend.

As we mentioned earlier, the 60Hz panel is not a feature that will attract gamers to the Sharp JP7. Perhaps for the casual gamer, whose console still generates most titles at 60 frames per second, there might be something interesting? When it comes to specific additions, we find here:

• ALLM mode: Automatically switches the TV to low latency game mode (input lag).

• Player menu: Which is hard to call a fully-fledged “Game Bar,” as the functionality is minimal. Aside from enabling ALLM, there’s only a dedicator for gaming which we advise against as it introduces very noticeable artifacts and spoils responsiveness.

• Dolby Vision Gaming: For Microsoft's consoles.

Unfortunately, the list of shortcomings is much longer and more painful than the positives. The biggest disappointment is the lack of support for 120Hz, even when reducing the resolution to Full HD. The presence of 120Hz would allow for performance modes to be activated in many games on the PS5 or Xbox Series X. Another shortcoming is the VRR, which means that during frame drops, we are susceptible to screen tearing. Very problematic is also the lack of proper implementation of the HGiG standard. This results in the fact that during HDR calibration in the console menu, it is very easy to "overshoot" the brightness settings. As a result, instead of clear details in the highlights, we end up with an unnaturally oversaturated image with cut-off details. The Sharp JP7 is a proposal only for those who game very occasionally.