Panasonic Z95B vs Philips PUS7000

The HDR effect quality in the Panasonic Z95B is among the absolute best. Thanks to the latest generation panel, named Primary RGB Tandem OLED by the manufacturer, the television can achieve over 2000 nits of brightness in movie scenes. The effect is impressive and can amaze with its intensity of light, giving a sense of contact with the screen that goes beyond previous experiences. Similar feelings were only experienced during tests of the LG G5, Samsung S95F, or Philips OLED910. Of course, there are moments when the device's algorithms decide to limit luminance – this especially applies to full-screen bright sequences, such as the ending credits in the movie The Meg. Even then, the Z95B maintains a level of around 1500 nits, which is still an extremely impressive result. Thus, it can be said that HDR in this model has been brought to a masterful form. A significant step forward is also visible in the reproduction of the colour palette. The new tandem OLED panel does not yet match the best QD-OLED screens in terms of gamut coverage, but the gap between these solutions has significantly decreased. When watching films, the differences are subtle enough that under normal conditions it's hard to notice them, and the colours remain vibrant and saturated.

Unfortunately, the PUS7000 is not suitable for watching HDR content. This screen is simply too dark. A brightness level of 200 nits is insufficient to display this format correctly. Even if a HDR signal message appears on the screen, the image will resemble a standard SDR recording. Therefore, it’s better to stick with the latter format to avoid errors in displaying bright scenes, as you will read below. The situation is worsened by the fact that this is a classic LCD model without additional layers that improve colours, such as QLED or PFS. As a result, colours in HDR may seem washed out. Ultimately, this provides a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

The factory colour reproduction in Filmmaker mode, my dear friends, is a true phenomenon in the case of the Panasonic Z95B. I'm talking about our test sample, but the results were so good that it's hard to believe. The only detail that one could nitpick is a slight lack of blue in the white balance, but apart from that, the television straight out of the box presented an image like we have never seen in factory mode. Colour palette tests, Color Checker – everything indicated values below Delta 2. This is a much lower result than the threshold of human eye perception, which means, to put it simply, that the viewer has no chance of noticing serious deviations. It looks as if Panasonic actually calibrated this model at the factory stage. Of course, we cannot exclude the possibility that we got an exceptionally well-set specimen, but the result still makes a stunning impression. We are very strict when it comes to assessing factory calibration, and here our jaws simply dropped.

We tested the television in movie mode, which theoretically should provide the best and most natural colours. And indeed, this mode is quite correct; however, when we connected the calibration equipment, its biggest flaw became apparent. The PUS7000 has significant shortcomings in displaying reds. Poorly tuned white balance and too low saturation of this colour cause the image to appear too cool. As a result, one might get the impression that the displayed content lacks vibrant colours. The situation is worsened by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and can make them seem slightly washed out. Fortunately, in the Philips menu, we find plenty of features to improve these aspects, so we immediately proceeded to calibration to see what we could extract from this screen.

The colour reproduction after calibration on the Z95B is a topic that’s hard to elaborate on, as there wasn’t much to do here. A slight adjustment of the white balance was enough to eliminate the lack of blue, and at that moment, the picture jumped to an almost reference level. It must be said that we haven’t had such a small range of adjustments in a long time. If any of you are particularly perceptive, you might notice minimal deviations in the EOTF curve, but this is more related to the functioning of the dynamic tone mapping feature we mentioned earlier. In reality, this isn’t a flaw, but a characteristic of this solution, which intentionally alters the brightness profile depending on the scene. In summary, we are extremely impressed. The Panasonic Z95B is a television that looks great right out of the box, and after calibration, it reaches a level where we really struggle to find anything to improve.

After professional calibration, it’s evident that the PUS7000 responds well to image adjustments. In this price range, that’s not a given. The effects are best evaluated in two scenarios, depending on the content we plan to watch. SDR performs the best. After our adjustments, the image looks really good. Most colour errors have dropped below level 3, which is the threshold at which discrepancies usually become visible to the naked eye. Movies, series, sports, and regular television present naturally, without unpleasant deviations. If someone mainly watches classic channels or streams in HD quality, the difference after calibration will be noticeable straight away. However, it must be said clearly that the PUS7000 is still not a television suited for proper HDR, and calibration doesn't change much in this regard. The reason lies in the hardware: colours remain too unsaturated. The television lacks solutions that widen the colour gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot display the intense colours required by HDR. This is most evident in reds, which still look washed out. This limitation cannot be circumvented through menu settings, as it stems from the design of the backlighting and the panel itself.

Let's start with what works well. The upscaling in the Z95B is at a very high level – the image in lower resolutions is clear and sharp, and the only minor shortcomings are slight banding in some areas of the picture. It's also important that the television doesn't crop the material in any way and maintains its proportions, which is not always an obvious fact even in 2025.

The situation looks worse when it comes to digital processing. Features like "gradation smoothing" or "block noise reduction" essentially do not work – the tested material looked identical regardless of the settings. We might as well say that this feature simply doesn't exist. It's a bit disappointing, especially since Panasonic heavily promotes its HCX Pro AI II processor, boasting the presence of artificial intelligence improving image quality. Meanwhile, in such a basic matter, the television does not deliver a real effect and it looks weaker than one would expect from top-tier equipment.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths unwanted tonal transitions even at a low setting. However, it has its downside: with too aggressive operation, it can introduce undesirable artifacts on the screen. It would be a good idea to experiment with this setting to find the golden mean between a smooth image and the clarity of details.

The upscaling, or enhancing the quality of lower materials to 4K, is decent. The image after processing is very "soft," which is typical of almost all Philips TVs. The edges are plastic and smooth, making the image look cohesive. If someone finds it too soft, it can always be adjusted with the sharpness slider in the menu for a more pronounced effect.

The OLED panel with very high refresh rates already provides an incredibly sharp image even in dynamic sports scenes, such as football or basketball matches, and the Z95B is no exception. It's also very important that the television is equipped with the proprietary motion smoothing system 'Intelligent Frame Creation'. Among the available sliders, the most crucial one turns out to be the one called 'film smoothness', as it allows for adjusting the motion to personal preferences with 24-frame content, meaning films – from a more 'choppy' appearance to a smooth, almost theatrical effect. It's a bit disappointing that Panasonic didn't opt to push the latest OLED panel to 165 Hz, as Samsung did with the S95F or LG with the G5, because we know that the panel is technically capable of it. On the other hand, it mainly benefits PC gamers, so in everyday viewing, it's not a significant drawback as we are limited to 120Hz.

In this regard, we actually have no good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that's actually the norm, and it's hard to expect more. However, the worst part is that the television has no motion smoothing features. There are no supporting systems in place for either movies or sports. We have to come to terms with the fact that the image on the PUS7000 is processed "raw." This means that during dynamic scenes or fast camera movements, motion can appear choppy or unclear. We have no option to enable any smoothers that could alleviate this effect.

The Panasonic Z95B is fully equipped for gaming. Two HDMI 2.1 ports with a full bandwidth of 48 Gb/s guarantee support for everything you can expect from a modern screen. It features VRR frame syncing, an automatic game mode (ALLM), and full compatibility with HDR formats used in gaming. The TV supports both Dolby Vision for Xbox and the popular HGiG, which in this case has been implemented correctly, so it actually works as it should.

Although the brand is mainly associated with home cinema and equipment for filmmakers, there’s also space for gamer conveniences here. Onboard is the Game Bar (or rather Game Circles) – it looks a bit unusual visually, but it does its job and allows you to quickly check the most important image parameters. The only thing missing for complete satisfaction is actually having four HDMI 2.1 ports instead of two. It’s a minor detail, but with a TV of this class, one could expect a full set.

Even though the PUS7000 isn’t marketed as a gaming TV, it doesn't perform as poorly in this category as one might expect. True, it doesn't support 120 Hz refresh rates, which is understandable at this price point, but the manufacturer has included several important features that significantly improve the console gaming experience. The most important of these are VRR and ALLM technologies. VRR is responsible for synchronising the screen with the number of frames generated by the console. This means the image doesn't "tear" and remains consistent even during sudden drops in frame rates while playing. On the other hand, ALLM is a solution that automatically switches the TV to a mode with the lowest latency immediately after detecting a signal from the console. All these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be brought up on the screen at any time. It allows for a quick view of current settings and connection status without interrupting gameplay, which is a very convenient solution.