Panasonic Z95B vs Haier M90E

The HDR effect quality in the Panasonic Z95B is among the absolute best. Thanks to the latest generation panel, named Primary RGB Tandem OLED by the manufacturer, the television can achieve over 2000 nits of brightness in movie scenes. The effect is impressive and can amaze with its intensity of light, giving a sense of contact with the screen that goes beyond previous experiences. Similar feelings were only experienced during tests of the LG G5, Samsung S95F, or Philips OLED910. Of course, there are moments when the device's algorithms decide to limit luminance – this especially applies to full-screen bright sequences, such as the ending credits in the movie The Meg. Even then, the Z95B maintains a level of around 1500 nits, which is still an extremely impressive result. Thus, it can be said that HDR in this model has been brought to a masterful form. A significant step forward is also visible in the reproduction of the colour palette. The new tandem OLED panel does not yet match the best QD-OLED screens in terms of gamut coverage, but the gap between these solutions has significantly decreased. When watching films, the differences are subtle enough that under normal conditions it's hard to notice them, and the colours remain vibrant and saturated.

Haier M90E is a television that doesn’t lack brightness. In most film scenes, peak luminance exceeds 1000 nits, which gives the image a distinct "punch" and high dynamics. This performs really well with typical bright HDR material. However, one must take into account the previously mentioned dimming algorithm. In scenes that are not evenly flooded with light – for example, when displaying individual stars on a black sky – the high brightness highlights the shortcomings of zone control. Instead of a precise light point, we often see a distinct halo effect around bright objects. Despite these drawbacks, the overall presentation of the image can be pleasing, thanks in large part to the colour reproduction. The manufacturer has applied a PFS phosphor coating, which allows for wide coverage of the colour palette. In our measurements, the coverage of the DCI-P3 space reached a solid 95%.

The factory colour reproduction in Filmmaker mode, my dear friends, is a true phenomenon in the case of the Panasonic Z95B. I'm talking about our test sample, but the results were so good that it's hard to believe. The only detail that one could nitpick is a slight lack of blue in the white balance, but apart from that, the television straight out of the box presented an image like we have never seen in factory mode. Colour palette tests, Color Checker – everything indicated values below Delta 2. This is a much lower result than the threshold of human eye perception, which means, to put it simply, that the viewer has no chance of noticing serious deviations. It looks as if Panasonic actually calibrated this model at the factory stage. Of course, we cannot exclude the possibility that we got an exceptionally well-set specimen, but the result still makes a stunning impression. We are very strict when it comes to assessing factory calibration, and here our jaws simply dropped.

For the measurements, we chose the Film mode, which is supposed to provide an image closest to the intentions of the creators. Unfortunately, in the case of the M90E, its characteristics – besides the reduced brightness – differ little from the Dynamic mode. In both SDR and HDR materials, the image is noticeably tinged with a cool blue hue. The white balance is heavily skewed towards blue, reminiscent of typical, aggressive "store" settings. This results in unnatural skin tone reproduction and makes the image tiring to the eyes during longer viewing sessions. The way brightness is managed also negatively impacts colour fidelity. The TV struggles to maintain proper levels – small details are often too dim, while larger, bright areas of the image become overexposed. These deviations in the brightness curve, combined with the cool white balance, lead to very large colour reproduction errors (DeltaE) in the factory settings.

The colour reproduction after calibration on the Z95B is a topic that’s hard to elaborate on, as there wasn’t much to do here. A slight adjustment of the white balance was enough to eliminate the lack of blue, and at that moment, the picture jumped to an almost reference level. It must be said that we haven’t had such a small range of adjustments in a long time. If any of you are particularly perceptive, you might notice minimal deviations in the EOTF curve, but this is more related to the functioning of the dynamic tone mapping feature we mentioned earlier. In reality, this isn’t a flaw, but a characteristic of this solution, which intentionally alters the brightness profile depending on the scene. In summary, we are extremely impressed. The Panasonic Z95B is a television that looks great right out of the box, and after calibration, it reaches a level where we really struggle to find anything to improve.

Haier M90E clearly improves after undergoing professional calibration, especially for SDR content. The television's menu offers a sufficient number of tools to effectively correct factory errors. We managed to "tame" the white balance and eliminate the dominant blue glow. We also adjusted, albeit to a lesser extent, the gamma curve, which allowed us to recover some details in the shadows that were too heavily dimmed in the factory settings. The final effect in SDR is a significantly more natural and pleasing image. In HDR mode, the success is only partial. While we managed to improve the white balance here too, color reproduction errors (Color Checker) remained at a high level. Analysis of the EOTF curve (responsible for brightness in HDR) points to the cause of the problem: the television imposes its own interpretation of the signal and does not provide tools to modify this curve. The source of high errors is not the calibration itself, but the specificity of the device – aggressive and imprecise zone dimming interferes with measurements and is "stiffly" embedded in the characteristics of this model.

Let's start with what works well. The upscaling in the Z95B is at a very high level – the image in lower resolutions is clear and sharp, and the only minor shortcomings are slight banding in some areas of the picture. It's also important that the television doesn't crop the material in any way and maintains its proportions, which is not always an obvious fact even in 2025.

The situation looks worse when it comes to digital processing. Features like "gradation smoothing" or "block noise reduction" essentially do not work – the tested material looked identical regardless of the settings. We might as well say that this feature simply doesn't exist. It's a bit disappointing, especially since Panasonic heavily promotes its HCX Pro AI II processor, boasting the presence of artificial intelligence improving image quality. Meanwhile, in such a basic matter, the television does not deliver a real effect and it looks weaker than one would expect from top-tier equipment.

The evaluation of the image processor must be divided into two distinct aspects, as the Haier M90E behaves inconsistently here. The first issue is the upscaling itself, which is the process of scaling lower resolution content to 4K. In this task, the television performs quite decently. The algorithms effectively enhance detail, making the final image relatively sharp, clear, and readable. In this respect, it’s hard to have major complaints about the device.

The situation is completely different with materials that have a high degree of compression, which we encounter in older recordings or on platforms like YouTube with a lower bitrate. Here, the processor struggles with smoothing tonal transitions and masking the imperfections of the source. The television fails to hide compression blocks, resulting in a very harsh, "digital" character of the image. The lack of effective artifact reduction can certainly deter viewers from watching lower quality content on this screen.

The OLED panel with very high refresh rates already provides an incredibly sharp image even in dynamic sports scenes, such as football or basketball matches, and the Z95B is no exception. It's also very important that the television is equipped with the proprietary motion smoothing system 'Intelligent Frame Creation'. Among the available sliders, the most crucial one turns out to be the one called 'film smoothness', as it allows for adjusting the motion to personal preferences with 24-frame content, meaning films – from a more 'choppy' appearance to a smooth, almost theatrical effect. It's a bit disappointing that Panasonic didn't opt to push the latest OLED panel to 165 Hz, as Samsung did with the S95F or LG with the G5, because we know that the panel is technically capable of it. On the other hand, it mainly benefits PC gamers, so in everyday viewing, it's not a significant drawback as we are limited to 120Hz.

Haier M90E is equipped with a simple yet functional motion smoothing system (MEMC). In the settings menu, users will find a three-level adjustment scale: low, medium, and high. This allows for adjusting the level of intervention in the image to personal preferences – from gentle smoothing of 24p films to maximum fluidity (soap opera effect). The system operates stably and fulfills its purpose in typical applications.

The Panasonic Z95B is fully equipped for gaming. Two HDMI 2.1 ports with a full bandwidth of 48 Gb/s guarantee support for everything you can expect from a modern screen. It features VRR frame syncing, an automatic game mode (ALLM), and full compatibility with HDR formats used in gaming. The TV supports both Dolby Vision for Xbox and the popular HGiG, which in this case has been implemented correctly, so it actually works as it should.

Although the brand is mainly associated with home cinema and equipment for filmmakers, there’s also space for gamer conveniences here. Onboard is the Game Bar (or rather Game Circles) – it looks a bit unusual visually, but it does its job and allows you to quickly check the most important image parameters. The only thing missing for complete satisfaction is actually having four HDMI 2.1 ports instead of two. It’s a minor detail, but with a TV of this class, one could expect a full set.

From a hardware perspective, the Haier M90E is a solid offering. The television is equipped with two full-bandwidth HDMI 2.1 ports, which ensure support for key technologies: VRR (variable refresh rate) and ALLM (auto low latency mode). Another plus is the correct implementation of Dolby Vision for gaming, which maintains a relatively low input lag. Problems arise with the software configuration. The biggest drawback is the forced, continuous dynamic tone mapping by the television's processor. This prevents proper HDR calibration from the console using system panels (HGiG) – the television ignores source settings and processes the image in its own way. We also noted deficiencies in the interface: the M90E does not have a typical "Game Bar" (overlay with parameters), which is standard among competitors. Cooperation with Xbox consoles has also proven problematic with atypical parameters – the device struggles to properly display 1440p resolution at 120 Hz refresh rate. Despite the aforementioned software shortcomings, the Haier M90E remains a very attractive screen for gamers. The final reception is saved by a solid hardware foundation. Native refresh rate of 144 Hz and the presence of full-featured HDMI 2.1 ports are advantages that are crucial in everyday use. If we are looking for a television that provides high fluency and supports 4K signal, this model will do its job.