Panasonic Z95B vs Dreame S100

The HDR effect quality in the Panasonic Z95B is among the absolute best. Thanks to the latest generation panel, named Primary RGB Tandem OLED by the manufacturer, the television can achieve over 2000 nits of brightness in movie scenes. The effect is impressive and can amaze with its intensity of light, giving a sense of contact with the screen that goes beyond previous experiences. Similar feelings were only experienced during tests of the LG G5, Samsung S95F, or Philips OLED910. Of course, there are moments when the device's algorithms decide to limit luminance – this especially applies to full-screen bright sequences, such as the ending credits in the movie The Meg. Even then, the Z95B maintains a level of around 1500 nits, which is still an extremely impressive result. Thus, it can be said that HDR in this model has been brought to a masterful form. A significant step forward is also visible in the reproduction of the colour palette. The new tandem OLED panel does not yet match the best QD-OLED screens in terms of gamut coverage, but the gap between these solutions has significantly decreased. When watching films, the differences are subtle enough that under normal conditions it's hard to notice them, and the colours remain vibrant and saturated.

The Dreame S100 is a relatively bright television. In movie mode, the brightness we measured reached around 600 nits. This is a really good result, although not the highest considering the competition in this price range. In full-screen scenes, it's clear that the television can generate an image that hits the mark in terms of brightness. Unfortunately, when more complex scenes appeared on the screen, the local dimming algorithm in this model tried above all to maintain the deepest blacks. However, this came at the expense of the HDR effect – and in a drastic way. In such scenes, the brightness of the bright elements fell below 100 nits, which is a downright tragic result, far from any HDR effect. This aspect can be improved, but there are caveats. You just need to change the local dimming setting in the television's menu; however, then the blacks in such scenes simply turn grey. It's a pity that Dreame wasn't able to refine the local dimming algorithms better, and the S100 is another example that the number of local dimming zones doesn't always translate into a better picture. As a consolation, it's worth noting that the Dreame S100 is marketed as a 'QLED' type television, although it actually uses a PFS LED filter. As a result, the colours are appropriately saturated, and our measured DCI-P3 colour gamut coverage exceeded 94%.

The factory colour reproduction in Filmmaker mode, my dear friends, is a true phenomenon in the case of the Panasonic Z95B. I'm talking about our test sample, but the results were so good that it's hard to believe. The only detail that one could nitpick is a slight lack of blue in the white balance, but apart from that, the television straight out of the box presented an image like we have never seen in factory mode. Colour palette tests, Color Checker – everything indicated values below Delta 2. This is a much lower result than the threshold of human eye perception, which means, to put it simply, that the viewer has no chance of noticing serious deviations. It looks as if Panasonic actually calibrated this model at the factory stage. Of course, we cannot exclude the possibility that we got an exceptionally well-set specimen, but the result still makes a stunning impression. We are very strict when it comes to assessing factory calibration, and here our jaws simply dropped.

We tested the Dreame S100 in "movie" mode and definitely recommend using this setting for watching all kinds of content. Interestingly, in the deeper settings of the TV, we also find a dedicated "Filmmaker" mode, which is now available from almost every manufacturer. However, in the case of the Dreame S100, we do not recommend using it – it blocks all settings related to the picture and does not allow for any configuration in the menu - not even a motion smoother. So how do the factory colours fare in the S100? Not too bad, but not great either. The TV itself had a noticeable blue tint, which is clearly evident in our white balance measurements. As a result, the picture was artificially brightened, and the colours had a slight bluish tint. This is also confirmed by the Color Checker palette, which showed how the colour samples leaned towards blue, generating quite significant colour errors. On the other hand, the picture looked definitely better in HDR mode, where the colour errors were not as prominent, although they were still far from ideal. Here, the white balance was also too heavily skewed towards blue, causing quite significant errors in color reproduction.

The colour reproduction after calibration on the Z95B is a topic that’s hard to elaborate on, as there wasn’t much to do here. A slight adjustment of the white balance was enough to eliminate the lack of blue, and at that moment, the picture jumped to an almost reference level. It must be said that we haven’t had such a small range of adjustments in a long time. If any of you are particularly perceptive, you might notice minimal deviations in the EOTF curve, but this is more related to the functioning of the dynamic tone mapping feature we mentioned earlier. In reality, this isn’t a flaw, but a characteristic of this solution, which intentionally alters the brightness profile depending on the scene. In summary, we are extremely impressed. The Panasonic Z95B is a television that looks great right out of the box, and after calibration, it reaches a level where we really struggle to find anything to improve.

The Dreame S100 has proven to be a device very amenable to professional calibration. In its menu, we found a plethora of advanced options that allowed us to effectively correct factory errors. Thanks to the advanced white balance correction – both in SDR and HDR content – we completely eliminated excess blue components. The image instantly became much more natural and pleasant to view. After fully tuning the colours, the errors in the Color Checker test dropped below a Delta E value of 2-3. For the average viewer, this means that any colour distortions became almost impossible to see with the naked eye. It's really a nice surprise, as often new brands in the TV market have significant problems with the correct implementation and functioning of sliders in the calibration menu. Here, everything worked as it should. The only thing we need to criticise is the way the TV manages its brightness in HDR. Due to the specific nature of the local dimming algorithms, our measured EOTF curve shows anomalies. In places where high highlights should appear, there is a slight bump in the curve above the reference line. In practice, this results in unnatural brightening of certain, the brightest elements in movies or games. Despite this minor flaw, professional calibration brings a huge, very positive change to this model.

Let's start with what works well. The upscaling in the Z95B is at a very high level – the image in lower resolutions is clear and sharp, and the only minor shortcomings are slight banding in some areas of the picture. It's also important that the television doesn't crop the material in any way and maintains its proportions, which is not always an obvious fact even in 2025.

The situation looks worse when it comes to digital processing. Features like "gradation smoothing" or "block noise reduction" essentially do not work – the tested material looked identical regardless of the settings. We might as well say that this feature simply doesn't exist. It's a bit disappointing, especially since Panasonic heavily promotes its HCX Pro AI II processor, boasting the presence of artificial intelligence improving image quality. Meanwhile, in such a basic matter, the television does not deliver a real effect and it looks weaker than one would expect from top-tier equipment.

For scaling and digital processing in the Dreame S100, the technology used is proudly called Dreamind™ Pro AI by the manufacturer. However, it must be clearly stated that this is not a proprietary processor but rather a marketing term for a chip from MediaTek – specifically, the model MT5889. Unfortunately, we are talking about a rather outdated unit from a time when MediaTek lagged significantly behind the competition in terms of performance. This, unfortunately, has a direct impact on the image, as this chip also handles that. The upscaling in the S100 is fairly average, and the processor has a tendency to artificially over-sharpen edges (fortunately, this can be somewhat tempered with the sharpness slider in the menu). In the options, we also find a feature called "Contour Smoothing," which theoretically is supposed to improve tonal transitions. In practice, it contributes almost no improvement – setting it to any level rarely eliminates visible colour banding, but it can unnecessarily blur elements of the image that should remain sharp.

Another issue is the phenomenon of overscan (cropping the edges of the frame), which is practically visible all the time. Although there is the possibility to set the screen to display the full frame in low-resolution materials, it requires activating the aforementioned Filmmaker mode. And as you may know, this mode completely blocks any changes to other sliders in the picture menu. In our test tables, we noted that the television offers an option to disable overscan, as such a function technically exists in the system – however, in everyday use, while maintaining reasonable picture settings, you will not be able to take advantage of it.

The OLED panel with very high refresh rates already provides an incredibly sharp image even in dynamic sports scenes, such as football or basketball matches, and the Z95B is no exception. It's also very important that the television is equipped with the proprietary motion smoothing system 'Intelligent Frame Creation'. Among the available sliders, the most crucial one turns out to be the one called 'film smoothness', as it allows for adjusting the motion to personal preferences with 24-frame content, meaning films – from a more 'choppy' appearance to a smooth, almost theatrical effect. It's a bit disappointing that Panasonic didn't opt to push the latest OLED panel to 165 Hz, as Samsung did with the S95F or LG with the G5, because we know that the panel is technically capable of it. On the other hand, it mainly benefits PC gamers, so in everyday viewing, it's not a significant drawback as we are limited to 120Hz.

When it comes to motion fluidity, the Dreame S100 performs really well. It features a 144 Hz refresh rate panel, although in reality, the vast majority of people using it in a conventional way will still be limited to 120 Hz (as this is what today's hardware allows aside from PCs). Thanks to the high refresh rate, the image in motion remains really sharp, largely due to the well-functioning MEMC motion smoother. In the menu, we find predefined modes that enable the TV to efficiently generate artificial frames, which effectively enhances the fluidity of dynamic sports shots, but also helps eliminate motion judder in film and TV series material recorded at 24 frames.

The Panasonic Z95B is fully equipped for gaming. Two HDMI 2.1 ports with a full bandwidth of 48 Gb/s guarantee support for everything you can expect from a modern screen. It features VRR frame syncing, an automatic game mode (ALLM), and full compatibility with HDR formats used in gaming. The TV supports both Dolby Vision for Xbox and the popular HGiG, which in this case has been implemented correctly, so it actually works as it should.

Although the brand is mainly associated with home cinema and equipment for filmmakers, there’s also space for gamer conveniences here. Onboard is the Game Bar (or rather Game Circles) – it looks a bit unusual visually, but it does its job and allows you to quickly check the most important image parameters. The only thing missing for complete satisfaction is actually having four HDMI 2.1 ports instead of two. It’s a minor detail, but with a TV of this class, one could expect a full set.

The Dreame S100 seems almost like the ideal screen for gamers. The television is equipped with 2 HDMI 2.1 ports with a bandwidth of 40 Gbps, allowing features such as automatic game mode (ALLM) or VRR frame synchronization in the range of 48-144 Hz to work seamlessly on consoles. On board, we also find a well-designed gaming panel (Game Bar). It allows you to continuously preview the most important parameters - from the activated picture modes, to the number of frames rendered by the console, right through to the option of adding a crosshair in the centre of the screen. All of this looks great on paper; however, the biggest issue with the S100 is its implementation of HDR in games. The television does not have a correctly implemented HGiG format. This means a clueless user may misconfigure the console during the initial setup of the screen. Poor configuration can result in an image that is too dark or overexposed (as a guideline: we suggest setting the brightness in the Xbox console menu to around 600 nits, and in the PS5 to 12 clicks). The Dolby Vision format also proves problematic, as it often did not activate at all on the XBOX – Dreame S100 line. And when it was eventually activated, playing was impossible due to the very high input lag often exceeding 100ms. If the manufacturer manages to improve the HDR gaming experience with an update, the S100 will be truly outstanding hardware for gamers. For now, however, compromises must be accepted.