Panasonic W95B vs Hisense U7S / U77SE

The Panasonic W95B is truly a bright screen, capable of achieving peak luminance levels of around 1400 nits. In brighter, well-lit movie scenes, this value translates into spectacular HDR effects that can leave a big impression. However, knowing our test setup, you probably see that in very demanding shots – such as the moon in the distance or the lights of a helicopter in a scene from Sicario 2 – the television doesn’t impress. In such situations, brightness drops to around 200 nits, making the HDR effect much less noticeable. This happens because Panasonic focuses on maintaining deep blacks, not illuminating the background – which shouldn’t be a concern for many users. However, it’s important to remember that in such moments, the picture starts to resemble SDR content. The coverage of the colour palette also deserves praise, as it reaches around 93% of the DCI-P3 space thanks to the use of the PFS filter (also known from QLED technology). This means that most films look very good in terms of saturation and colours, maintaining a cinematic quality to the image.

The Hisense U7S has considerable HDR potential, but it can’t make full use of it in every scene. On a test pattern it reaches about 1100 nits, so the backlight is genuinely strong. In our brighter film scenes we measured around 640 to 745 nits. That’s still enough for the sun or bright highlights to have a distinct bloom and to show an advantage over SDR material. When the TV needs to light a larger portion of the image, it handles it quite well.

The problem appears with small lights on a dark background. Each of the 192 zones covers an area considerably larger than a tiny point on the screen. If the TV were to drive such a zone strongly, it would brighten the surrounding area along with the light. Hisense tries to avoid that and dims the whole zone. Blacks look better as a result, but a small bright object that should draw the eye also loses intensity. That’s why in two tougher scenes we recorded only 297 and 154 nits. The difference is large: in one shot HDR can impress, and in the next small highlights are noticeably muted. The U7S therefore prioritises keeping deep blacks, even at the expense of bright details. With this number of zones it’s an understandable compromise, but it’s worth remembering that the peak 1100 nits tells us about the backlight’s capability, not how brightly the TV will show every element of a film.

Colours

Hisense markets the U7S as ULED, but that’s a marketing name; the wider colour gamut here is achieved by a PFS phosphor backlight. In our measurements the TV covered about 91% of the DCI-P3 space and 71% of BT.2020. Those are good results, though a little short of the best screens on the market. The biggest shortfall is in green — the TV doesn’t even reach the DCI-P3 boundary there, so the most intense green hues will be less saturated than they should be. Most colours in HDR films and series still look suitably vivid, however. A positive is the repeatability of the results: gamut coverage on test patterns and in film scenes is practically identical.

In Filmmaker mode, the Panasonic W95B offers an image with quite accurate colour reproduction, although it is not without minor imperfections. The white balance slightly leans towards red, which can cause a subtle warm tint to the image, and the gamma curve is slightly elevated, making the screen appear a bit brighter. It's good that the manufacturer has included this mode – even in its factory configuration, it provides a fairly natural look for films. However, knowing how susceptible Panasonic televisions are to calibration, we decided to check how much the image could be improved after professional tuning.

Factory colours on the Hisense U7S are decent, but there are a few things to fix. In SDR the white balance favours red, so the image looks too warm, in places with a slightly pink tint. You can see this on faces and bright, neutral surfaces. Gamma also runs below the target, so the TV brightens the image, especially in darker areas. That makes it easier to see shadow detail, but the scene loses some of its depth.

In HDR the white balance is a bit more even, but not completely neutral, with midtones lacking blue and the brightest parts lacking red. A bigger problem is the way brightness is reproduced. The EOTF curve shows that a large portion of the midtones is boosted, making the image appear brighter than the source material intends. Color Checker measurements also fare worse than in SDR: many errors are around 3 to 4, and individual ones reach as high as 8. Colours can therefore look attractive, but they're not always faithful to what we should be seeing. There’s room for improvement and we’ll see how much can be corrected with calibration.

After professional calibration, the Panasonic W95B shows what it’s really capable of. Colour errors have mostly dropped below values of 2–3, making them practically invisible to the human eye. The excess red in the white balance has also been corrected, which means the image is no longer slightly tinted pink, and details in dark areas no longer get lost due to excessive dimming in the gamma. The improvement in HDR content is also noticeable – colour saturation is now more stable and doesn’t lean towards blue as distinctly as it did before. It’s truly a fantastic television for watching movies and series in the highest possible quality. While we know that Mini LED screens are not always perfectly suited for this, the W95B is a prime example that with proper tuning, a result close to OLEDs can be achieved.

Calibrating the Hisense U7S did the most for SDR content. We managed to even out the white balance, so the earlier warm tint is gone and whites and greys look neutral. Gamma now sits very close to the reference, so the TV no longer brightens the image unnecessarily and darker scenes have regained depth. Color Checker measurements confirm the improvement: most errors are below 2. For watching regular TV and SDR films, this delivers a really well calibrated picture. Calibration in HDR wasn’t as smooth. The TV lacks an effective way to correct the EOTF curve, so Hisense still interprets the film’s brightness a bit on its own. It brightens parts of the image and, depending on the scene and local dimming, can tone down the brightest elements. That couldn’t be eliminated by calibration. This also shows up in the Color Checker results, where many errors remain around 3–4 and some exceed 7. In SDR the result is therefore very good, but in HDR we have to accept that the TV adds its own interpretation of brightness to the image.

In terms of image processing, the Panasonic W95B performs exceptionally well. The proprietary processor responsible for digital image processing effectively upscales lower resolution content to 4K, maintaining a high level of detail and a natural look to contours. The end result is impressive – the upscaling is truly top-notch, and Full HD content can look surprisingly good. Also noteworthy is how the TV smooths tonal transitions in low-quality materials. The algorithm doesn’t operate as aggressively as in some competing models, which helps avoid the loss of detail or the blurring of film grain.

The processing of lower-quality material in the Hisense U7S is fairly average. The Pentonic 700 chipset used here doesn't cope particularly well with the effects of heavy compression. There's a "Smooth and Gradient Picture" function in the menu, but its performance leaves a lot to be desired. At the low setting it's hard to see any improvement in tonal transitions, though at least the picture doesn't suffer. Medium and high settings still don't remove visible banding between tones and begin to blur details; in our clips parts of characters' faces even vanished. Interestingly, film grain remains untouched at every level. If you do use this function, stick to the low setting. Its current performance needs refinement, but that's mainly down to the processor used here.

Upscaling to 4K performs much better. Lower-resolution content gains clarity, edges are well reproduced and fine details look sharp. That doesn't mean the TV can recover details that weren't in the recording, but it makes good use of what's provided by the source. Another plus is the lack of edge cropping, even with an SD signal.

The 144 Hz panel used in the Panasonic W95B offers excellent smoothness, although in practice, given how television content looks or how new-generation consoles are limited, it’s worth looking at its performance when refreshing at 120 Hz. In this mode, the television performs exceptionally well – despite being a VA panel, which is not known for the fastest pixel response times, motion blur is minimal and difficult to detect with the naked eye.

Motion handling on the Hisense U7S is decent thanks to its 144 Hz refresh rate. For films there's also a motion smoothing option with adjustable judder and blur reduction. You can keep a more cinematic feel to motion or increase smoothness if choppy camera pans bother you. High refresh is also useful for sport and gaming, but unfortunately it doesn't solve the panel's biggest problem.

The issue is pixel response time. Fast-moving objects leave long, distinct trails, as our UFO test shows. It's worst on dark backgrounds, where the trail is particularly pronounced. So motion can be smooth, but the moving object loses sharpness, and that difference on the U7S is fairly easy to spot.

Aside from the previously mentioned issue related to VRR mode, where local dimming does not work, the Panasonic W95B is a true gaming beast. The TV offers practically everything that gamers could expect – perhaps apart from four HDMI 2.1 ports, as there are only two available. On board, we find automatic low latency mode (ALLM), correctly implemented HDR modes for gamers, including HGiG, as well as support for Dolby Vision in games. The whole package is complemented by an interestingly designed Game Bar, presented in the form of circles. It may not be the most visually attractive, but it fulfills its purpose – allowing quick access to key game parameters and adjusting settings without diving into the system menu.

The Hisense U7S has plenty to offer gamers. You get two HDMI 2.1 ports and support for 120 Hz in Full HD, 1440p and 4K, so modern consoles’ capabilities are well utilised. When connected to a PC you can use 144 Hz at 4K or switch the resolution to Full HD and run 240 Hz. So there’s a lot of choice, although it’s worth remembering the motion smearing mentioned earlier, which the high refresh rate doesn’t eliminate. VRR and ALLM are present as well. VRR helps keep the picture tear-free when a game’s frame rate changes. ALLM automatically switches the TV into game mode, so you don’t have to go into the menu each time. VRR works from 48 to 240 Hz, with the highest refresh rate available in Full HD. Xbox users can also play in Dolby Vision at 120 Hz. Importantly, that format does not cause significant input lag here. The Game Bar also looks great. It’s clear and attractive, and lets you quickly check what signal the TV is receiving. Handy gaming settings are close to hand too, including shadow brightening. If it’s hard to spot an opponent in a dark game, you can improve visibility without digging through the whole menu.

Our biggest complaint is HGiG. Hisense keeps doing its own tone mapping, which makes setting up HDR on the console confusing. You adjust the checkerboard pattern, and the TV continually alters its appearance. As a result, the point at which the pattern disappears does not correctly indicate the display’s brightness limit, and it’s easy to set the value too high. For this model it’s better to set the target HDR brightness on the console to around 900 to 1000 nits, rather than rely on the configurator.