Panasonic W70A vs Samsung U8000F (IPS)

HDR on the Panasonic W70A unfortunately does not impress. A brightness level of 250–300 nits is simply too low to feel the true magic of cinematic effects in dynamic, bright scenes. Images that should “explode” with light appear rather flat, and fine details in bright areas often get lost in the average luminance of the panel. On the plus side, the HDR effect is at least stable. The TV does not suffer from excessive brightening nor lose details with sudden scene changes. Everything is predictable and calm, though unfortunately lacking in impact. Another issue is the colour gamut coverage. The W70A is not equipped with an additional layer of quantum dots (often known as QLED), which is why the colours appear rather average. There is a lack of depth in reds, saturation in greens, and precision in reproducing subtle shades.

Better doesn't mean good – and that's exactly how you can sum up the capabilities of the U8092F when it comes to displaying bright movie scenes in HDR mode. The brightness of the panel is just under 250 nits, which is definitely too low to enjoy any light effects. An interesting situation was observed during measurements of the fourth scene from the movie Sicario 2 – the television clearly dimmed the entire screen in an attempt to achieve better black levels (which still remain weak). One could even suggest that the device employs some form of "global dimming," but unfortunately – the effects are still very poor. To make matters worse, the television does not support a wide colour gamut – the coverage of the DCI-P3 space is around 80%, so don’t count on truly vibrant colours. The HDR image here looks more like slightly brightened SDR, and that’s the approach we would suggest you stick to when it comes to this television.

The Panasonic W70A was tested in movie mode, which theoretically should guarantee the most natural image reproduction. Unfortunately, as is often the case with budget televisions, reality turned out to be far from ideal.

In HD (SDR) content, the white balance was significantly disrupted by an excess of red and a noticeable drop in blue tones. The result? The image had a distinctly warm, almost yellowish glow, which is clearly visible in the comparison photo. In the case of 4K HDR materials, the situation reversed. Here, the image became excessively cold and bluish, causing scenes to lose their naturalness and depth. The differences are visible even to the naked eye, especially in the bright areas of the image. The Colour Checker palette test confirmed our observations. Most colour samples did not hit their intended points, 'drifting' towards warmer shades in SDR and cooler ones in HDR. In terms of brightness characteristics, both gamma and the EOTF curve showed significant issues. The image tended to excessively brighten certain areas, disrupting the balance and leading to a loss of detail in both darker and brighter regions.

In summary – the factory colour reproduction settings in the Panasonic W70A leave much to be desired. The image is far from neutral, and errors in white balance and gamma mean that solid calibration is needed to extract the full potential from this television.

Samsung U8000F has been tested in the best possible built-in picture mode on the television, which is Filmmaker Mode. This mode should – at least in theory – provide a cinematic, reference image without unnecessary enhancements. For SDR content (mainly HD/SD), the television presented itself surprisingly well out of the box. White balance errors hovered around a value of 3, which is roughly on the edge of perceptibility. The only criticism could be directed at brightness management – the gamma chart showed a slight tendency to brighten or darken certain sections, but overall it performs quite well for this price segment.

Unfortunately, it looks much worse in HDR mode. Although the white balance was not terrible, the television had significant colour errors – particularly evident on the Color Checker chart, where almost every sample fell outside the target point. The image in HDR simply looks unnatural, and the colours can be shifted, muted, or too cool. This largely stems from the fact that U8000F does not support a wide colour gamut (DCI-P3). The television is physically unable to display correct colours in the HDR standard – and this is unfortunately felt in every more demanding material.

Panasonic W70A, despite its limitations, gave us plenty of room to manoeuvre during calibration. Thanks to well-developed tools, we were able to achieve a much better white balance in both HD (SDR) and 4K HDR content. The issues with excessive red in SDR and overly cool images in HDR have disappeared. The gamma brightness characteristics have also been improved, now maintaining stability and not leading to excessive brightening or loss of detail in darker areas.

So where is the problem? Unfortunately, there are barriers that even professional calibration cannot overcome. Poor coverage of a wide colour gamut means the television cannot fully convey colours in HDR materials. There is a lack of saturation, and subtle colour transitions still appear somewhat “flattened.” Another limitation is the brightness management due to the IPS panel used. In a comparison photograph with an actress's face in colourful clothing, it is clearly visible how some shades are distinctly muted, and colours lose their depth and vibrancy.

Calibration has extracted from the W70A as much as it could. The image is now much more natural, and the factory setting errors have been effectively corrected. Unfortunately, the hardware limitations in the form of poor colour gamut coverage and an average panel mean that even after calibration, we are unable to achieve spectacular effects, especially in HDR content.

Even though the U8000F already offered a fairly good picture in SDR straight out of the box, we managed to tweak it a bit more. We were able to remove a slight purple tint and adjust the gamma to a more reasonable level. However, the television still tends to over-brighten the smallest and brightest parts of the image – the gamma chart shows a characteristic "dip" that is hard to fully straighten out.

Unfortunately, the situation looks worse in HDR. It's difficult to talk about any significant improvement here – the television simply isn't designed for HDR content. We tried to adjust the picture in the advanced settings, but despite our efforts, the colour errors remained quite noticeable – a delta E above 7 is already significantly visible deviations. It's a bit unfortunate, but that's the charm of a budget build. In SDR, the U8000F performs reasonably, whereas HDR is simply not its league.

We checked how the Panasonic W70A handles upscaling content that is lower quality than 4K, and I must admit that the TV performs quite decently in this regard. The feature responsible for smoothing tonal transitions is called "Zeroing Counter." The optimal setting turned out to be the Average option, which effectively smooths out colour gradation issues while not ruining the film grain. This is the setting we recommend for most users, as it provides a balance between enhancing the smoothness of transitions and maintaining the naturalness of the image.

When it comes to image scaling, the Panasonic W70A performed really well. The test chart with the model looked positive – details in her clothing were well reproduced, and the contours of her face maintained sharpness. In the background, we noticed a slight "jagginess" on thin branches, but these are details that only a very attentive eye will catch. However, it's worth noting a certain quirk of this model – the TV has a tendency to overscan, meaning it slightly crops the edges of the image. It’s not a very intense phenomenon, and for most users, it will be practically unnoticeable, but if we care about perfectly framing the shot, it's worth keeping this in mind.

When it comes to how the Samsung U8000F handles lower quality materials, we must admit that Samsung has made progress compared to its predecessor from last year – the DU7192 model, which theoretically occupies the same place in the offering.

This year's model has been equipped with a function to improve the smoothness of tonal transitions, which has been implemented significantly better than last year. Yes, the TV still uses quite strong algorithms that can distort details or remove film grain, but even so – it can be confidently said that it operates effectively.

However, not everything has gone perfectly. The U8000F has noticeable issues with slight frame stuttering when watching very old content in very low resolution. If someone plans to play their old VHS tape, they must be aware that the picture may appear slightly "choppy".

The Panasonic W70A is equipped with a 60 Hz panel, which immediately suggests that the TV is best suited for watching movies, series, or everyday television content. In more dynamic scenes, such as sports broadcasts or games, the limitations of the panel become more noticeable. However, it is worth noting the presence of a motion smoother called “Effect”, which offers three levels of adjustment – low, medium, and high.

Each setting allows you to adjust the smoothness of motion to your own preferences, minimizing the motion blur effect and improving the clarity of dynamic shots. In practice, the Medium setting seems to be the most universal – it offers better smoothness without the excessive “soap opera effect” that can look artificial in feature films. The High setting may work well for sports broadcasts, but in movies, it can disrupt the natural character of motion.

Samsung U8000F is equipped with a 60 Hz panel, so right from the start, it's clear that we shouldn't expect miracles. This is simply the standard in this class – sufficient for everyday viewing, but without any fireworks.

The television offers one motion smoothing slider – a feature called “Motion Blur Reduction”, which allows us to adjust the smoothness of the image in movies. Higher settings provide a more “theatrical” and smoothed effect, while lower ones maintain the original character of the film with a slight 24p effect. An interesting feature is “Clear Motion LED”, or BFI mode – which inserts black frames between the image frames to enhance motion clarity. However, in practice, the screen flickers significantly when it's activated, and it's better viewed as an experiment rather than something that truly enhances gaming comfort.

The Panasonic W70A is a TV that is likely to suit casual gamers more than hardcore players. The 60 Hz refresh rate doesn't fully utilise the potential of next-gen consoles, especially in dynamic titles. The lack of HDMI 2.1 slightly limits its capabilities, but fortunately, it includes features like ALLM, which automatically switches to game mode, and VRR, which helps minimise screen tearing. It's also worth noting the support for Dolby Vision in games and HGiG, making HDR more predictable and looking solid. It's a pity, though, that it lacks Game Bar. This feature is now standard in many TVs and provides quick access to the most important settings for gamers. The W70A performs well for gaming, but it does have its limitations. It will do fine with more laid-back titles, but more demanding gamers may feel unsatisfied.

Samsung U8000F offers a basic set of features for gamers, which may still be sufficient for less demanding users. It has an automatic game mode – when a game is launched on the console, the TV automatically switches to low latency mode, which significantly improves response time. It also includes a VRR function, or variable refresh rate, which works within the range of 48 to 60 Hz. This means that both Xbox and PS5 won't produce the "tearing" effect – as long as we stay within this range.

And unfortunately, that's about it for the advantages. Additional features like Game Bar or higher refresh rates are reserved for higher models of Samsung’s 2025 line. In theory, the TV also supports the HGiG function, which should adjust the HDR image to the intentions of game developers. Unfortunately – although this function appears in brochures and store materials – its setup on the Xbox console turned out to be... impossible in practice.