Panasonic W70A vs Hisense A6Q

HDR on the Panasonic W70A unfortunately does not impress. A brightness level of 250–300 nits is simply too low to feel the true magic of cinematic effects in dynamic, bright scenes. Images that should “explode” with light appear rather flat, and fine details in bright areas often get lost in the average luminance of the panel. On the plus side, the HDR effect is at least stable. The TV does not suffer from excessive brightening nor lose details with sudden scene changes. Everything is predictable and calm, though unfortunately lacking in impact. Another issue is the colour gamut coverage. The W70A is not equipped with an additional layer of quantum dots (often known as QLED), which is why the colours appear rather average. There is a lack of depth in reds, saturation in greens, and precision in reproducing subtle shades.

Unfortunately, the Hisense A6Q is hard to recommend for watching HDR content. The main issue remains the low brightness and quite modest coverage of a wide colour gamut. A measured brightness of about 300 nits simply isn't enough for HDR materials to look impressive. In practice, the image often resembles standard SDR rather than true HDR with clear differences in brightness and dynamics. Additionally, colours in such content do not appear as they should. The TV does not utilise additional filters like QLED or PFS LED, and a DCI-P3 coverage of around 80% makes some colours look just too pale. As a result, some scenes in HDR materials lose intensity and spectacle, making it hard to talk about a proper HDR experience.

The Panasonic W70A was tested in movie mode, which theoretically should guarantee the most natural image reproduction. Unfortunately, as is often the case with budget televisions, reality turned out to be far from ideal.

In HD (SDR) content, the white balance was significantly disrupted by an excess of red and a noticeable drop in blue tones. The result? The image had a distinctly warm, almost yellowish glow, which is clearly visible in the comparison photo. In the case of 4K HDR materials, the situation reversed. Here, the image became excessively cold and bluish, causing scenes to lose their naturalness and depth. The differences are visible even to the naked eye, especially in the bright areas of the image. The Colour Checker palette test confirmed our observations. Most colour samples did not hit their intended points, 'drifting' towards warmer shades in SDR and cooler ones in HDR. In terms of brightness characteristics, both gamma and the EOTF curve showed significant issues. The image tended to excessively brighten certain areas, disrupting the balance and leading to a loss of detail in both darker and brighter regions.

In summary – the factory colour reproduction settings in the Panasonic W70A leave much to be desired. The image is far from neutral, and errors in white balance and gamma mean that solid calibration is needed to extract the full potential from this television.

We conducted the tests in the best available mode, which is Filmmaker, however – as is often the case – this does not mean the image is perfect straight out of the box. In the case of Hisense A6Q, this mode clearly “swallowed” too much blue in everyday SDR content. In practice, this led to an image with yellowed whites, particularly noticeable on large, bright surfaces. This does not result from poor assumptions of the Filmmaker mode itself or from the vision of filmmakers, but from factory settings that require adjustment.
Additionally, looking at the saturation characteristics and gamma curve in SDR, as well as EOTF in HDR content, there is a slight tendency to brighten most scenes. As a result, the image often appears brighter than it should, losing a bit of its naturalness. For this reason, we decided to perform a professional calibration to restore the proper colour balance and a more accurate brightness characteristic.

Panasonic W70A, despite its limitations, gave us plenty of room to manoeuvre during calibration. Thanks to well-developed tools, we were able to achieve a much better white balance in both HD (SDR) and 4K HDR content. The issues with excessive red in SDR and overly cool images in HDR have disappeared. The gamma brightness characteristics have also been improved, now maintaining stability and not leading to excessive brightening or loss of detail in darker areas.

So where is the problem? Unfortunately, there are barriers that even professional calibration cannot overcome. Poor coverage of a wide colour gamut means the television cannot fully convey colours in HDR materials. There is a lack of saturation, and subtle colour transitions still appear somewhat “flattened.” Another limitation is the brightness management due to the IPS panel used. In a comparison photograph with an actress's face in colourful clothing, it is clearly visible how some shades are distinctly muted, and colours lose their depth and vibrancy.

Calibration has extracted from the W70A as much as it could. The image is now much more natural, and the factory setting errors have been effectively corrected. Unfortunately, the hardware limitations in the form of poor colour gamut coverage and an average panel mean that even after calibration, we are unable to achieve spectacular effects, especially in HDR content.

Colours after calibration on the Hisense A6Q need to be evaluated in two ways, as everything depends on the type of content. In the case of SDR materials, the effect is really quite good. In daily programs, series, and movies, it’s hard to find any serious issues with colours. The yellow tint has been effectively removed, and the television has also stopped washing out the entire image. As a result, the ColorChecker test showed errors below a Delta 2 value, which are already outstanding results, allowing for a discussion of very high picture quality in standard content. Unfortunately, the situation looks much worse for HDR materials. Yes, the white balance has been corrected and the EOTF curve has been improved, but the limitations of the panel itself remain insurmountable. The lack of support for a wide colour gamut means that the television still generates quite significant colour errors. Parts of the colours simply cannot be displayed by the screen, making them look less saturated than they should. It’s a pity because even a simple PFS or QLED filter would have resulted in a significantly better end effect. The conclusion is therefore simple – for SDR content, the A6Q after calibration works really very well, while viewing HDR content on it should still be approached with caution.

We checked how the Panasonic W70A handles upscaling content that is lower quality than 4K, and I must admit that the TV performs quite decently in this regard. The feature responsible for smoothing tonal transitions is called "Zeroing Counter." The optimal setting turned out to be the Average option, which effectively smooths out colour gradation issues while not ruining the film grain. This is the setting we recommend for most users, as it provides a balance between enhancing the smoothness of transitions and maintaining the naturalness of the image.

When it comes to image scaling, the Panasonic W70A performed really well. The test chart with the model looked positive – details in her clothing were well reproduced, and the contours of her face maintained sharpness. In the background, we noticed a slight "jagginess" on thin branches, but these are details that only a very attentive eye will catch. However, it's worth noting a certain quirk of this model – the TV has a tendency to overscan, meaning it slightly crops the edges of the image. It’s not a very intense phenomenon, and for most users, it will be practically unnoticeable, but if we care about perfectly framing the shot, it's worth keeping this in mind.

Upscaling on the Hisense A6Q works really well for a TV in this price range. Lower resolution materials are correctly “upscaled” to higher resolutions, and the image remains clear without any artificial edge sharpening or the typical "over-sharpening" found in cheap models. Unfortunately, the digital processing is significantly poorer. In practice, it’s hard to talk about any advanced artifact smoothing or masking of problematic tonal transitions. In heavily compressed films—especially those from YouTube—the TV struggles with reducing compression blocks and unwanted banding, making the material's imperfections clearly visible. The A6Q scales the image well, but when it comes to digital processing, it leaves the user alone with the source quality.

The Panasonic W70A is equipped with a 60 Hz panel, which immediately suggests that the TV is best suited for watching movies, series, or everyday television content. In more dynamic scenes, such as sports broadcasts or games, the limitations of the panel become more noticeable. However, it is worth noting the presence of a motion smoother called “Effect”, which offers three levels of adjustment – low, medium, and high.

Each setting allows you to adjust the smoothness of motion to your own preferences, minimizing the motion blur effect and improving the clarity of dynamic shots. In practice, the Medium setting seems to be the most universal – it offers better smoothness without the excessive “soap opera effect” that can look artificial in feature films. The High setting may work well for sports broadcasts, but in movies, it can disrupt the natural character of motion.

The fluidity of motion on the Hisense A6Q is... well, quite average. It's a TV with a native refresh rate of 60 Hz in 4K, which means the movement of objects on the screen doesn't always look perfectly smooth. In dynamic scenes in films or sports, it's evident that this is not the strongest point of this model. The situation looks much better with 1080p content when connecting a console or computer, as the A6Q can then operate at up to 120 Hz. That's a big plus, especially for gamers. However, the sharpness of motion still leaves a lot to be desired, with noticeable ghosting, and the response time of the panel shows that it isn't one of the TV's strong suits.

The Panasonic W70A is a TV that is likely to suit casual gamers more than hardcore players. The 60 Hz refresh rate doesn't fully utilise the potential of next-gen consoles, especially in dynamic titles. The lack of HDMI 2.1 slightly limits its capabilities, but fortunately, it includes features like ALLM, which automatically switches to game mode, and VRR, which helps minimise screen tearing. It's also worth noting the support for Dolby Vision in games and HGiG, making HDR more predictable and looking solid. It's a pity, though, that it lacks Game Bar. This feature is now standard in many TVs and provides quick access to the most important settings for gamers. The W70A performs well for gaming, but it does have its limitations. It will do fine with more laid-back titles, but more demanding gamers may feel unsatisfied.

For such an inexpensive television, the Hisense A6Q really can surprise with what it offers gamers. It operates in 4K only at 60 Hz, but when the game switches to performance mode and drops to 1080p, the panel can work at even 120 Hz. In this price range, that's a big plus, as most titles on consoles don’t deliver a stable 4K at 120 frames. In practice, we are realistically gaming in 1080p, and here the A6Q provides a very enjoyable gaming experience. Additionally, it has a few features that are usually found in more expensive models: ALLM, VRR, and Dolby Vision Gaming for Xbox Series X/S. Everything is gathered in one place, in a simple and convenient Game Bar, so you don't need to dig through the entire menu. For such an affordable piece of equipment, it's really a solid setup for gamers — maybe not for the most demanding, but definitely spot on for occasional gaming.