LG UT8100 (IPS) vs Philips OLED811

The LG UT8100 television unfortunately does not meet expectations in the HDR effect category. A peak brightness of only 300 nits on the luminance chart is well below the required value to fully enjoy HDR effects. In practice, the image resembles SDR quality more than true HDR, which is particularly evident in demanding high-contrast scenes. The coverage of the DCI-P3 colour palette is only 82%, which further limits the ability to present vibrant and rich colours. Instead of impressive visual experiences, we receive a muted and washed-out image. For those looking for a television to fully utilise HDR content, the LG UT8100 model turns out to be quite disappointing.

Philips OLED811 uses the new generation WOLED EX panels, also found in models like the LG C6 and Samsung S90H. After calibration we measured about 1500 nits, which is a very good result for an OLED TV. You can see that clearly in films and series. Flashes of light have the right punch, especially when they appear on a dark background. In those scenes the OLED811 can deliver really impressive HDR. Of course this doesn't mean you'll see that level of brightness in every shot. When the screen is filled with a large area of white or a wide explosion, brightness falls to around 600 nits. That's still a good result, but such scenes don't have the same impact as small bright elements on a dark background. That's a known limitation of OLEDs and the OLED811 is no exception.

Colours

Aside from HDR brightness, colours also matter and here Philips also performs very well. It covers almost the entire DCI-P3 gamut, which contains most of the colours used in HDR films and series. So you get rich reds and lush greens, and while watching it's hard to fault it in that regard. It looks a bit worse with the much wider BT.2020 gamut — its most saturated shades are already beyond the reach of this panel. There's also the issue of the white subpixel that the WOLED panel uses to help boost brightness. With very bright colours you can see a certain "washout": the colour is bright but loses some of its intensity. It's in exactly these situations that Samsung Display's QD-OLED panels have the advantage. In most films and series, though, this won't be something that immediately jumps out at you.

The Filmmaker Mode on LG UT8100, while theoretically the best for watching movies, has significant issues. The biggest problem is the white balance – drops in blue cause a noticeable yellowing of the image, visible in both HD and 4K content. These issues are confirmed by measurement results in the Colour Checker test, which indicate significant deviations in colour reproduction.

In terms of brightness characteristics, both HD and 4K content exhibit a large tonal boost. The gamma curve in both cases remains well below the reference value of 2.4, which leads to excessive brightening of darker elements of the image. A similar problem is evident in the EOTF curve – in the case of 4K content, the TV struggles to manage brightness correctly, resulting in issues with screen brightness. This means the factory settings of this model require significant adjustment to achieve better picture quality.

The film mode on the Philips OLED811 is sensibly set up straight out of the box. Most colour errors remain minor in both SDR and HDR, so you can comfortably sit down to watch without adjusting the settings first. There are no large inaccuracies that would immediately distract from the film.

It’s not quite perfect, though. The white balance shows a slight lack of red relative to green, so whites and greys can have a faint greenish tint. It’s not a strong colour cast, but measurements clearly show it. There are also small luminance deviations in SDR: some parts of the image are slightly brightened, and the deepest tones aren’t always reproduced evenly. In HDR the TV stays much closer to the reference, although it occasionally lifts detail from the shadows. These are generally things that can be refined. The factory film mode provides a good starting point, and calibration will reveal how much more you can get out of it.

After calibrating the Filmmaker Mode, the gamma has been aligned to practically perfect, reference values, which has significantly improved the overall tonal characteristics in HD content. 4K HDR content also looks better, although some issues are still visible at the extreme ends of the graph, where the curve deviates from the ideal. The EOTF curve performs worse since the TV struggles to maintain the correct brightness values. As a result, the image in some scenes may be too bright or slightly dim, which stems from the device’s design. Nevertheless, the calibration brought significant improvement, particularly for HD content, where the tonal balance and colour reproduction are now at a much higher level.

After calibration the Philips OLED811 delivers an image very close to the reference. We managed to even out the white balance and remove the slight colour cast visible in the factory settings. ColorChecker errors for SDR and HDR fell to around 1 to 2, with many samples even below 1. That's a level at which differences from the reference are hard to spot with the naked eye. We also improved the gamma, with only a slight lift remaining in the brightest whites. In HDR the EOTF curve also stays close to the reference, although the TV still tends to slightly boost the brightness of small details, such as stars or subtitles. That gives the picture a bit of extra brightness that shouldn't be there, but otherwise it's hard to find fault. It was already good out of the box, and calibration allowed us to iron out most of the remaining issues.

The fluidity of tonal transitions is also correct, although the effect depends on the settings. The update improved the operation of the smooth gradation function, smoothing transitions better than before, but introduced minor issues with detail loss, e.g. on textures.

Image scaling on LG UT8100 performs very well. The image presents itself decently, with no major issues regarding edge aliasing. Details are preserved at a satisfactory level, making materials of lower resolution look really solid on this television. As a result, users can enjoy watching older content without any noticeable defects in quality.

The OLED811 handles processing lower-quality material reasonably well, though it's far from perfect. The "Banding reduction" function helps smooth tonal transitions and on the low setting gives a pretty good effect. It doesn't remove banding between shades as effectively as similar solutions from some competitors, but at least it doesn't introduce new artefacts. It's a sensible setting for everyday viewing. Still, there's a bit of a letdown, because the MediaTek Pentonic 800 chipset used here can, in other manufacturers' hands, deal with the effects of heavy compression more effectively even at similarly low settings. A lot therefore depends on how a given manufacturer uses its capabilities.

We have a few more comments about the upscaling to 4K. There's plenty of detail, but overall the image looks rather soft. Edges are heavily smoothed, so the picture lacks some sharpness and clarity. You can partially correct this with the sharpness slider in the menu, though that will be extra edge enhancement rather than recovering detail. On the plus side, there's no overscan, and even with an SD signal the TV doesn't crop the edges of the picture.

LG UT8100, equipped with a 60 Hz panel, is particularly suited for those watching movies. The television offers the TruMotion system with a de-judder effect adjustment, which allows users to tailor the smoothness of the picture – from more choppy to exceptionally smooth, resembling a soap opera effect, depending on user preferences.

In terms of motion handling the OLED811 performs superbly. At 120 Hz, which is useful for console gaming and watching sport, the image remains clear and moving objects don't leave noticeable trails. The OLED's fast pixel response helps here. You can see it clearly in the UFO test, even on a dark background. There are also controls for motion smoothing. In movies you can adjust the strength of smoothing to your taste, from preserving a cinematic feel to much smoother motion. A separate blur-reduction control is useful for fast-paced content like live sports broadcasts.

LG UT8100 offers basic features for gamers, such as ALLM and Game Bar, which makes it easier to access settings. The TV also supports HGiG, improving picture quality in HDR games. Unfortunately, the lack of support for Dolby Vision and VRR limits the device's capabilities, as does the 60 Hz panel, which excludes support for 120 Hz resolution. This model is more suited for less demanding gaming applications.

The OLED811 has almost everything you’d expect from a TV for gaming. It supports 120 Hz at Full HD, 1440p and 4K, and when connected to a PC it can reach up to 165 Hz. It also offers VRR to help avoid screen tearing when frame rates fluctuate, and ALLM, which automatically switches to game mode. So you don’t have to go into the settings every time you start your console.

Another plus is the properly working HGiG, which ensures that once HDR is set on the console the TV doesn’t apply its own changes to image brightness. The Game Bar is also available, letting you check signal parameters and quickly change settings useful while gaming. The list even includes Dolby Vision for games, but there’s a significant catch here, which you’ll read about below.