LG UT8100 (IPS) vs LG OLED B6

The LG UT8100 television unfortunately does not meet expectations in the HDR effect category. A peak brightness of only 300 nits on the luminance chart is well below the required value to fully enjoy HDR effects. In practice, the image resembles SDR quality more than true HDR, which is particularly evident in demanding high-contrast scenes. The coverage of the DCI-P3 colour palette is only 82%, which further limits the ability to present vibrant and rich colours. Instead of impressive visual experiences, we receive a muted and washed-out image. For those looking for a television to fully utilise HDR content, the LG UT8100 model turns out to be quite disappointing.

LG B6 is a moderately bright OLED. After calibration it reaches around 800 nits, roughly 200 nits more than last year's B5. That's down to LG Display's new budget OLED SE panel. In practice this simply provides a bit more headroom and makes HDR look fuller in many scenes than on last year's lower-end OLEDs. That doesn't mean the B6 has no limitations. In very bright shots, when a large part of the screen is brightly lit, brightness can fall below 400 nits. This behaviour is typical of OLED TVs (especially in this segment), and it's then you see the biggest difference compared with pricier models. All the same, we rate the B6's results as really solid. It's still not a TV built to break brightness records, but the HDR effect is strong enough that films really feel like a step up from ordinary SDR picture.

Colour gamut

Using the OLED SE panel has had some impact on wide colour-gamut coverage. Compared with last year's model the figures have dropped by a few percentage points. DCI-P3 reaches about 96%, and BT.2020 around 71%. That doesn't mean the colours on the LG B6 are weak. In most films and TV series they look vivid, well saturated and simply pleasing to the eye. You only notice the difference in very bright, highly colourful scenes. Then colours lose some intensity compared with QD-OLED panels. This is due to the WOLED panel structure. In addition to the red, green and blue subpixels it also uses a white subpixel that helps boost brightness. This comes at a cost: at very high luminance some of the colour is effectively 'diluted' by the white light, so saturation of some hues can be slightly lower. Day-to-day it's not a big problem, but you can see it in the most demanding scenes.

The Filmmaker Mode on LG UT8100, while theoretically the best for watching movies, has significant issues. The biggest problem is the white balance – drops in blue cause a noticeable yellowing of the image, visible in both HD and 4K content. These issues are confirmed by measurement results in the Colour Checker test, which indicate significant deviations in colour reproduction.

In terms of brightness characteristics, both HD and 4K content exhibit a large tonal boost. The gamma curve in both cases remains well below the reference value of 2.4, which leads to excessive brightening of darker elements of the image. A similar problem is evident in the EOTF curve – in the case of 4K content, the TV struggles to manage brightness correctly, resulting in issues with screen brightness. This means the factory settings of this model require significant adjustment to achieve better picture quality.

We tested the LG B6 in Filmmaker Mode, the best picture setting available straight out of the box. ISF modes give very similar results, but in our tests we always stick to Filmmaker Mode for better comparison with other TVs. Each of them is a far better starting point than Vivid or Eco, where the picture is heavily boosted and noticeably less natural. For SDR content the factory settings perform really well. Colour errors are small, gamma behaves correctly, and the picture looks natural during regular viewing and does not seem overly enhanced.

It's a bit worse with HDR. Once you start playing that kind of content it's quickly apparent the white balance isn't perfectly set. Too much blue and red makes the image take on a slightly pink tint. Colour gamut measurements and the ColorChecker confirm this, with samples clearly shifting in that direction. It's not a defect that completely ruins the picture, but you can notice it with HDR films. So anyone who wants the most faithful image should consider calibration, which we cover later in the review.

After calibrating the Filmmaker Mode, the gamma has been aligned to practically perfect, reference values, which has significantly improved the overall tonal characteristics in HD content. 4K HDR content also looks better, although some issues are still visible at the extreme ends of the graph, where the curve deviates from the ideal. The EOTF curve performs worse since the TV struggles to maintain the correct brightness values. As a result, the image in some scenes may be too bright or slightly dim, which stems from the device’s design. Nevertheless, the calibration brought significant improvement, particularly for HD content, where the tonal balance and colour reproduction are now at a much higher level.

During calibration we focused mainly on HDR material, because that’s where the factory settings needed the most correction. We didn’t neglect SDR, though. After tuning it was brought almost to perfection. Colours are very accurate and brightness is controlled as it should be. The biggest change in HDR came from improving the white balance. After removing excess red and blue the pinkish tint disappeared and the image became much more natural. Skin tones, whites and all colours that had previously leaned towards pink improved. After calibration most errors fell below Delta E 2-3, the threshold at which an average viewer stops noticing differences with the naked eye. So the LG B6 can produce a very accurate picture, especially for the manufacturer’s entry-level OLED model.

The fluidity of tonal transitions is also correct, although the effect depends on the settings. The update improved the operation of the smooth gradation function, smoothing transitions better than before, but introduced minor issues with detail loss, e.g. on textures.

Image scaling on LG UT8100 performs very well. The image presents itself decently, with no major issues regarding edge aliasing. Details are preserved at a satisfactory level, making materials of lower resolution look really solid on this television. As a result, users can enjoy watching older content without any noticeable defects in quality.

LG B6 copes very well with lower-quality material. Much of that is down to effective digital image processing, which can mask some source imperfections without excessively smoothing the whole scene. The "Smooth Gradation" feature proves particularly useful. It lets you noticeably reduce posterization mentioned earlier, especially in dark parts of the image. The safest choice is to set it to Low or Medium. The feature still effectively smooths out harsh tonal transitions, but doesn't yet interfere too much with fine details. Die-hard purists can of course leave it off. Upscaling to 4K also performs very well. Full HD and 720p content retain a fair amount of detail, and the image is neither overly sharpened nor heavily blurred. Some limitations are only noticeable with very poor sources below 720p, where the smallest text and fine elements aren't always perfectly sharp, but this is true for almost every other TV on the market.

LG UT8100, equipped with a 60 Hz panel, is particularly suited for those watching movies. The television offers the TruMotion system with a de-judder effect adjustment, which allows users to tailor the smoothness of the picture – from more choppy to exceptionally smooth, resembling a soap opera effect, depending on user preferences.

One of the biggest advantages of OLED panels is their very fast pixel response time. That keeps the picture sharp and prevents visible smearing that often appears on LCD TVs. It does have a downside, though. During slow camera pans motion can look a bit choppier than on LCD screens, where the slower panel naturally masks some of that effect. Fortunately, on the LG B6 this is easy to tame with TruMotion. With the motion smoothing set correctly you can get smoother motion without giving the picture an exaggerated soap-opera effect.

LG UT8100 offers basic features for gamers, such as ALLM and Game Bar, which makes it easier to access settings. The TV also supports HGiG, improving picture quality in HDR games. Unfortunately, the lack of support for Dolby Vision and VRR limits the device's capabilities, as does the 60 Hz panel, which excludes support for 120 Hz resolution. This model is more suited for less demanding gaming applications.

LG OLED B6 has plenty going for gamers; it's a complete base for the PS5, Xbox Series X/S or a solid PC. It comes with four full-size HDMI 2.1 ports with 48 Gb/s bandwidth, so you can forget about annoying cable swapping when you want to connect several newer devices at once. We get a full package of sync technologies, from classic VRR to G-Sync and FreeSync. The panel effortlessly syncs its refresh rate to the frame pacing produced by your console or graphics card. Of course ALLM is present: the B6 automatically recognises when a game is running and immediately cuts latency to a minimum. HDR support is also excellent. The TV supports Dolby Vision, and a correctly implemented HGiG means that after an initial calibration in the console settings the picture won't suffer from blown-out whites or lost detail in bright areas. The icing on the cake is the Game Bar. Instead of digging through the full menu mid-game, a single click lets you correct shadow visibility, tweak chosen parameters or simply check the display's current mode. All of this makes the LG B6 a great choice for gamers.