LG UR781 vs Philips PUS7000

In HDR mode, LG UR781 unfortunately does not impress with its brightness. In tests on five screens, the television achieved only around 200 nits, which is quite a low value for HDR standards. This brightness is comparable to levels typical for SDR, which means that HDR effects are not sufficiently vivid, and the picture may look less impressive, especially in dynamic, bright scenes. In HDR mode, it has certain limitations in colour reproduction. This means that colours may not be as intense and rich as in televisions that handle a wider colour gamut better. In practice, this can make the image less vibrant and dynamic, and HDR effects may not be as spectacular as one might expect. Additionally, UR781 LG has some issues with accurate colour representation in HDR mode, which makes content look less lively.

Unfortunately, the PUS7000 is not suitable for watching HDR content. This screen is simply too dark. A brightness level of 200 nits is insufficient to display this format correctly. Even if a HDR signal message appears on the screen, the image will resemble a standard SDR recording. Therefore, it’s better to stick with the latter format to avoid errors in displaying bright scenes, as you will read below. The situation is worsened by the fact that this is a classic LCD model without additional layers that improve colours, such as QLED or PFS. As a result, colours in HDR may seem washed out. Ultimately, this provides a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

Colour reproduction in LG UR781 in Filmmaker Mode, which although it is the best mode available from factory settings, is not without its flaws. First and foremost, the issue is with white balance, where the graph shows dips in the blue colour level. This phenomenon results in a shift towards yellow hues, making the image warmer than it should be. Such deviation means that the colours on the screen are not reproduced naturally, which may be particularly noticeable in scenes with white or neutral backgrounds. This can be confirmed by the Color Checker Test, which showed that some colours "escape" into other shades, indicating that the LG UR781 TV does not display colours accurately. This distortion can affect visual experiences, making film scenes seem less realistic and details may be displayed in incorrect colours, negatively impacting overall picture quality.

In terms of contrast, analysis of the gamma graph revealed drops to a level of 2.0, while the optimal value should be 2.4. This means that the TV may display darker parts of the image brighter in some scenes, reducing their depth and dynamism. Additionally, on the EOTF curve, which is responsible for brightness reproduction, an unnatural spike was noticed at the beginning. This phenomenon may result in excessive brightness boosting in the brightest parts of the image, leading to a loss of details in very bright scenes.

We tested the television in movie mode, which theoretically should provide the best and most natural colours. And indeed, this mode is quite correct; however, when we connected the calibration equipment, its biggest flaw became apparent. The PUS7000 has significant shortcomings in displaying reds. Poorly tuned white balance and too low saturation of this colour cause the image to appear too cool. As a result, one might get the impression that the displayed content lacks vibrant colours. The situation is worsened by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and can make them seem slightly washed out. Fortunately, in the Philips menu, we find plenty of features to improve these aspects, so we immediately proceeded to calibration to see what we could extract from this screen.

After calibration, colour reproduction in SDR content is quite good. The white balance has been effectively improved, resulting in natural, balanced hues across different scenes. The gamma has also been adjusted, providing a more precise representation of details in the shadows and bright areas of the image. As a result, the LG UR781 TV performs well in everyday use, offering solid colour quality and clear, well-balanced images in SDR mode.

However, the situation is less favourable for HDR content. The LG UR781 TV does not support a wide colour gamut, which limits the depth and richness of colours that HDR can provide. The EOTF curve deviates from the ideal, leading to excessive highlighting of details in the bright areas of the image. Unfortunately, this approach results in significant colour reproduction errors, as confirmed by tests on the Colour Checker. Additionally, the low brightness level of the panel further negatively impacts HDR image quality, causing the effects of dynamic range to not be fully realised and colours to appear washed out.

Despite some shortcomings in HDR mode, the TV has significantly improved after calibration, especially in SDR content. The enhancement of white balance and gamma has notably increased image quality, providing a more natural and cohesive colour reproduction. Compared to its pre-calibration state, the difference is clear, and the LG UR781 TV now offers better performance in everyday use, particularly in standard dynamic range.

After professional calibration, it’s evident that the PUS7000 responds well to image adjustments. In this price range, that’s not a given. The effects are best evaluated in two scenarios, depending on the content we plan to watch. SDR performs the best. After our adjustments, the image looks really good. Most colour errors have dropped below level 3, which is the threshold at which discrepancies usually become visible to the naked eye. Movies, series, sports, and regular television present naturally, without unpleasant deviations. If someone mainly watches classic channels or streams in HD quality, the difference after calibration will be noticeable straight away. However, it must be said clearly that the PUS7000 is still not a television suited for proper HDR, and calibration doesn't change much in this regard. The reason lies in the hardware: colours remain too unsaturated. The television lacks solutions that widen the colour gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot display the intense colours required by HDR. This is most evident in reds, which still look washed out. This limitation cannot be circumvented through menu settings, as it stems from the design of the backlighting and the panel itself.

Let's now address the function of smoothing tonal transitions and its impact on overall picture quality. As illustrated by the photo on the left, this function performs exceptionally mediocre; we chose the "low" level, which does not enhance quality but also does not blur the film grain. There is a possibility to increase the strength of this function, which could soften this gradation, but one must consider that the image will be too softened in certain scenes.

On the other hand, regarding image scaling, the television does not perform outstandingly, which may be particularly noticeable with lower resolution content. The LG UR781 television applies a slight, artificial sharpening boost, making the image appear sharper; however, this mainly results from the application of artificial contours. For some users, this may be an advantage, as they prefer more vivid, pronounced details. However, this is a subjective matter—such an effect may not appeal to everyone, especially if they desire a more natural appearance of the image.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths unwanted tonal transitions even at a low setting. However, it has its downside: with too aggressive operation, it can introduce undesirable artifacts on the screen. It would be a good idea to experiment with this setting to find the golden mean between a smooth image and the clarity of details.

The upscaling, or enhancing the quality of lower materials to 4K, is decent. The image after processing is very "soft," which is typical of almost all Philips TVs. The edges are plastic and smooth, making the image look cohesive. If someone finds it too soft, it can always be adjusted with the sharpness slider in the menu for a more pronounced effect.

The LG UR781 TV offers quite decent smoothness for movies, thanks to the "True Motion" option, which allows users to adjust the motion smoothing level on a scale from 0 to 10. Users can choose whether they want to maintain a more traditional, cinematic effect with a slight stutter (lower settings) or prefer a smoother image with a theatrical quality, which, although slightly deviating from the cinematic standard, may appeal to many.

In dynamic sports content and gaming, the LG UR781 TV performs worse. The TV has a 60Hz panel, which limits its interpolation capabilities to these values; therefore, smoothness can be improved in films, but motion blur cannot be reduced. Additionally, the lack of support for 120 Hz and BFI (Black Frame Insertion) technology means that fast-moving objects become blurred, and the panel's response time is too slow, negatively affecting clarity in fast scenes. As a result, the TV may not meet the expectations of gamers and sports fans who are counting on a smooth, clear image without motion blur.

In this regard, we actually have no good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that's actually the norm, and it's hard to expect more. However, the worst part is that the television has no motion smoothing features. There are no supporting systems in place for either movies or sports. We have to come to terms with the fact that the image on the PUS7000 is processed "raw." This means that during dynamic scenes or fast camera movements, motion can appear choppy or unclear. We have no option to enable any smoothers that could alleviate this effect.

When playing on a console, the LG UR781 TV offers several significant features that can affect the gaming experience, but it also has some limitations. On the plus side, it includes ALLM (Auto Low Latency Mode), which automatically optimises the picture settings by switching the LG UR781 TV to low latency mode, which is beneficial for gamers. The TV also supports correct implementation of HGiG, meaning HDR games look as intended by the creators.

Unfortunately, it lacks support for Variable Refresh Rate (VRR), which can result in worse gameplay smoothness, especially in more dynamic games. It also does not support Dolby Vision mode for gaming, which limits HDR picture quality in games using this format. The TV has a 60Hz panel, so it does not support higher frequencies at other resolutions, such as 1080p@120Hz, 1440p@120Hz, or 4K@120Hz, which is a significant downside for gamers expecting smoother gameplay at higher resolutions. There is also no support for G-Sync technology, which limits image synchronisation in games.

On the positive side, the presence of a Game Bar feature allows for quick access to settings for gamers and makes it easier to adjust picture parameters during gameplay.

Even though the PUS7000 isn’t marketed as a gaming TV, it doesn't perform as poorly in this category as one might expect. True, it doesn't support 120 Hz refresh rates, which is understandable at this price point, but the manufacturer has included several important features that significantly improve the console gaming experience. The most important of these are VRR and ALLM technologies. VRR is responsible for synchronising the screen with the number of frames generated by the console. This means the image doesn't "tear" and remains consistent even during sudden drops in frame rates while playing. On the other hand, ALLM is a solution that automatically switches the TV to a mode with the lowest latency immediately after detecting a signal from the console. All these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be brought up on the screen at any time. It allows for a quick view of current settings and connection status without interrupting gameplay, which is a very convenient solution.