LG UR781 vs LG NANO81A / NANO80A

In HDR mode, LG UR781 unfortunately does not impress with its brightness. In tests on five screens, the television achieved only around 200 nits, which is quite a low value for HDR standards. This brightness is comparable to levels typical for SDR, which means that HDR effects are not sufficiently vivid, and the picture may look less impressive, especially in dynamic, bright scenes. In HDR mode, it has certain limitations in colour reproduction. This means that colours may not be as intense and rich as in televisions that handle a wider colour gamut better. In practice, this can make the image less vibrant and dynamic, and HDR effects may not be as spectacular as one might expect. Additionally, UR781 LG has some issues with accurate colour representation in HDR mode, which makes content look less lively.

If you're hoping that HDR on the NANO81A will bring tears to your eyes, I have to disappoint you. This TV is just too dark to show what this format is really about. With a brightness of only 250 nits, HDR really only exists on paper here. In practice, during viewing, it's very hard to tell whether we're watching material in high dynamic range or regular SDR – it simply lacks that “punch” of light in the bright parts of the image. But, to balance out the criticism, we do have one light at the end of the tunnel – and quite a distinct one at that. It's about colour gamut coverage. Here, the NanoCell filter shows that it's not just marketing nonsense. Our measurements indicated that the coverage of the DCI-P3 space is around 88%. That's a really solid result, placing this model significantly above typical budget models based on regular white LEDs without any filters. Of course, it still lags a bit behind QLED TVs or advanced panels with PFS filters, but for this price range, the colours are surprisingly saturated and vibrant. It’s just a shame that this low brightness doesn't allow them to fully “spread their wings” with the Nano filter.

Colour reproduction in LG UR781 in Filmmaker Mode, which although it is the best mode available from factory settings, is not without its flaws. First and foremost, the issue is with white balance, where the graph shows dips in the blue colour level. This phenomenon results in a shift towards yellow hues, making the image warmer than it should be. Such deviation means that the colours on the screen are not reproduced naturally, which may be particularly noticeable in scenes with white or neutral backgrounds. This can be confirmed by the Color Checker Test, which showed that some colours "escape" into other shades, indicating that the LG UR781 TV does not display colours accurately. This distortion can affect visual experiences, making film scenes seem less realistic and details may be displayed in incorrect colours, negatively impacting overall picture quality.

In terms of contrast, analysis of the gamma graph revealed drops to a level of 2.0, while the optimal value should be 2.4. This means that the TV may display darker parts of the image brighter in some scenes, reducing their depth and dynamism. Additionally, on the EOTF curve, which is responsible for brightness reproduction, an unnatural spike was noticed at the beginning. This phenomenon may result in excessive brightness boosting in the brightest parts of the image, leading to a loss of details in very bright scenes.

For every film fan, the natural choice in LG televisions is the Filmmaker Mode. It is designed to show the image as the director intended – without unnecessary "enhancements". Unfortunately, in the case of our test unit NANO81A, the factory settings left a bit to be desired. The main issue turned out to be the white balance. Measurements revealed a distinct deficiency of blue, which in practice meant that many scenes had a slightly yellowish, even "yellowed" tint. The white wasn’t perfectly clean, which took away the freshness of the image. Additionally, the brightness management wasn't perfect either – the factory-set gamma was too low. The image often appeared oversaturated, as if it had been pulled too much from the shadows, which detracted from its naturalness and depth. Fortunately, LG, even in this relatively low price range, does not block access to advanced settings. The calibration options for this model are extensive, which is a significant plus for those who enjoy "fiddling" in the menu. We decided to approach the matter our way and see how much we could squeeze out of this panel with professional calibration.

After calibration, colour reproduction in SDR content is quite good. The white balance has been effectively improved, resulting in natural, balanced hues across different scenes. The gamma has also been adjusted, providing a more precise representation of details in the shadows and bright areas of the image. As a result, the LG UR781 TV performs well in everyday use, offering solid colour quality and clear, well-balanced images in SDR mode.

However, the situation is less favourable for HDR content. The LG UR781 TV does not support a wide colour gamut, which limits the depth and richness of colours that HDR can provide. The EOTF curve deviates from the ideal, leading to excessive highlighting of details in the bright areas of the image. Unfortunately, this approach results in significant colour reproduction errors, as confirmed by tests on the Colour Checker. Additionally, the low brightness level of the panel further negatively impacts HDR image quality, causing the effects of dynamic range to not be fully realised and colours to appear washed out.

Despite some shortcomings in HDR mode, the TV has significantly improved after calibration, especially in SDR content. The enhancement of white balance and gamma has notably increased image quality, providing a more natural and cohesive colour reproduction. Compared to its pre-calibration state, the difference is clear, and the LG UR781 TV now offers better performance in everyday use, particularly in standard dynamic range.

After calibration, the NANO81A is a completely different television. What LG offers in terms of image enhancement tools, even in such an affordable model, deserves major credit. We were able to completely eliminate that annoying yellowing of whites and make the colours natural, vibrant, and simply "real". In SDR content (i.e., regular television, YouTube, or older films), the picture now looks miles better – it’s clean, well-balanced, and no longer strains the eyes with strange hues. It’s clear that this panel has significant potential, which is simply wasted out of the box due to poor presets. However, we have one serious reservation that calibration cannot fully overcome – it's about brightness management in HDR mode. The LG algorithm in this model is very conservative. The TV deliberately dims the HDR image to avoid clipping the already weak blacks of the IPS panel. The developers faced a choice: either provide more light and accept that black would become light grey, or dial down the brightness to maintain any contrast. They chose the latter. Despite this, after our adjustments, watching anything on the NANO81 is considerably better.

Let's now address the function of smoothing tonal transitions and its impact on overall picture quality. As illustrated by the photo on the left, this function performs exceptionally mediocre; we chose the "low" level, which does not enhance quality but also does not blur the film grain. There is a possibility to increase the strength of this function, which could soften this gradation, but one must consider that the image will be too softened in certain scenes.

On the other hand, regarding image scaling, the television does not perform outstandingly, which may be particularly noticeable with lower resolution content. The LG UR781 television applies a slight, artificial sharpening boost, making the image appear sharper; however, this mainly results from the application of artificial contours. For some users, this may be an advantage, as they prefer more vivid, pronounced details. However, this is a subjective matter—such an effect may not appeal to everyone, especially if they desire a more natural appearance of the image.

It often happens that cheap 4K panels ruthlessly expose all the "dirty laundry" and imperfections in lower resolution materials. However, with the LG NANO81A, the situation is completely different. It's a really solid performer when it comes to handling content that's far from ideal. The built-in processor does a great job with upscaling. Even older recordings look quite decent on this screen – the image is coherent, cleaned of digital noise, and simply pleasant to the eye. A big plus is the gradation reduction feature, which you can find in the settings. It is exceptionally effective in combating colour banding, which is a godsend when watching low bitrate materials, such as from some streaming services or older files from the web. However, it is worth maintaining a certain vigilance. Since we are dealing with a less powerful chip than in LG's top models, too aggressive a setting for this option can sometimes result in minor artifacts or slight blurring of details. Despite this risk, I definitely encourage experimentation with this feature – in many cases, it can save the viewing experience and make low-quality material fully watchable.

The LG UR781 TV offers quite decent smoothness for movies, thanks to the "True Motion" option, which allows users to adjust the motion smoothing level on a scale from 0 to 10. Users can choose whether they want to maintain a more traditional, cinematic effect with a slight stutter (lower settings) or prefer a smoother image with a theatrical quality, which, although slightly deviating from the cinematic standard, may appeal to many.

In dynamic sports content and gaming, the LG UR781 TV performs worse. The TV has a 60Hz panel, which limits its interpolation capabilities to these values; therefore, smoothness can be improved in films, but motion blur cannot be reduced. Additionally, the lack of support for 120 Hz and BFI (Black Frame Insertion) technology means that fast-moving objects become blurred, and the panel's response time is too slow, negatively affecting clarity in fast scenes. As a result, the TV may not meet the expectations of gamers and sports fans who are counting on a smooth, clear image without motion blur.

In terms of motion fluidity, the NANO81A unfortunately has a bit of a hurdle. The television is based on a panel with a refresh rate of 60Hz. If you're looking for perfect sharpness in dynamic football matches or fast-paced action games, you might feel somewhat dissatisfied. With such a low native refresh rate, fast objects on the screen will always be a bit blurry.

When playing on a console, the LG UR781 TV offers several significant features that can affect the gaming experience, but it also has some limitations. On the plus side, it includes ALLM (Auto Low Latency Mode), which automatically optimises the picture settings by switching the LG UR781 TV to low latency mode, which is beneficial for gamers. The TV also supports correct implementation of HGiG, meaning HDR games look as intended by the creators.

Unfortunately, it lacks support for Variable Refresh Rate (VRR), which can result in worse gameplay smoothness, especially in more dynamic games. It also does not support Dolby Vision mode for gaming, which limits HDR picture quality in games using this format. The TV has a 60Hz panel, so it does not support higher frequencies at other resolutions, such as 1080p@120Hz, 1440p@120Hz, or 4K@120Hz, which is a significant downside for gamers expecting smoother gameplay at higher resolutions. There is also no support for G-Sync technology, which limits image synchronisation in games.

On the positive side, the presence of a Game Bar feature allows for quick access to settings for gamers and makes it easier to adjust picture parameters during gameplay.

NANO81A is unfortunately not a device designed with esports in mind. The lack of 120 Hz signal support is a fact that users planning to purchase this model simply have to accept. Nevertheless, LG’s engineers have worked hard to squeeze the maximum potential from this 60 Hz panel, offering a set of features that genuinely improve gaming comfort. First and foremost, the television supports VRR technology (in the range of 48–60 Hz) and ALLM. This ensures that the image remains stable and does not "tear," and the device automatically switches to low latency mode as soon as it detects a signal from a console. Managing these settings is extremely simple thanks to a dedicated system overlay that allows for a quick preview of parameters without leaving the game. A very significant advantage is support for the HGiG format. This solution is crucial for owners of modern consoles, as it allows the television to correctly "understand" the intentions of game developers regarding HDR tone mapping. In practice, this helps avoid the effect of "blown-out" bright spots, such as clouds or light sources, which is unfortunately a common issue in budget LCD televisions.