LG QNED86A / QNED85A / QNED87A vs Philips OLED811

Against the backdrop of contrast and black, the brightness of the QNED86A and the overall HDR effect fare much better. It's a television that can achieve around 700 nits under the best conditions, so in terms of luminance alone, there’s nothing to be ashamed of. As a result, scenes with strong lights, explosions, flashes, or bright parts of the landscape – look clear and can make an impression. Interestingly, even in tougher moments with small, contrasting elements on the screen, the television does well with backlighting and details are quite visible. The problem arises when there are many dark tones. The lack of effective local dimming means that black virtually disappears, and instead, we get a grey glow spreading across the entire screen. This kills the depth effect and causes the image to appear flat, as if it lacks cinematic character. In bright animations or family films with vibrant colours, this won't be an issue, as the colours and bright light dominate. But in horror films or productions set in darkness, these limitations are strongly felt. As a consolation, it’s worth noting that the QNED86A is essentially a QLED television with an LED PFS filter, which gives it very good coverage of wide colour gamuts. Both the DCI-P3 palette and the wider BT.2020 perform solidly here. This means that colours in HDR films are saturated, juicy, and have the right depth – even if the black itself is disappointing, the colours can save the viewing experience and make the image look appealing.

Philips OLED811 uses the new generation WOLED EX panels, also found in models like the LG C6 and Samsung S90H. After calibration we measured about 1500 nits, which is a very good result for an OLED TV. You can see that clearly in films and series. Flashes of light have the right punch, especially when they appear on a dark background. In those scenes the OLED811 can deliver really impressive HDR. Of course this doesn't mean you'll see that level of brightness in every shot. When the screen is filled with a large area of white or a wide explosion, brightness falls to around 600 nits. That's still a good result, but such scenes don't have the same impact as small bright elements on a dark background. That's a known limitation of OLEDs and the OLED811 is no exception.

Colours

Aside from HDR brightness, colours also matter and here Philips also performs very well. It covers almost the entire DCI-P3 gamut, which contains most of the colours used in HDR films and series. So you get rich reds and lush greens, and while watching it's hard to fault it in that regard. It looks a bit worse with the much wider BT.2020 gamut — its most saturated shades are already beyond the reach of this panel. There's also the issue of the white subpixel that the WOLED panel uses to help boost brightness. With very bright colours you can see a certain "washout": the colour is bright but loses some of its intensity. It's in exactly these situations that Samsung Display's QD-OLED panels have the advantage. In most films and series, though, this won't be something that immediately jumps out at you.

We primarily tested the QNED86A in Filmmaker mode, which is designed to provide the most faithful picture. Unfortunately, right out of the box, there were quite a few shortcomings. The most glaring issue was the poorly calibrated white balance – there was a lack of blue, which caused the overall image to take on a slightly yellowish, and sometimes even an orange hue. An even bigger problem was the way the television manages brightness. Due to its technical limitations – that is, local dimming functioning only along the edges of the screen – the QNED86A has a tendency to oversaturate entire scenes. This is where the flattening of the image that we mentioned earlier comes from. Instead of clear depth and contrast, we get something akin to "boosted brightness," which, in the long run, can strain the eyes.

The film mode on the Philips OLED811 is sensibly set up straight out of the box. Most colour errors remain minor in both SDR and HDR, so you can comfortably sit down to watch without adjusting the settings first. There are no large inaccuracies that would immediately distract from the film.

It’s not quite perfect, though. The white balance shows a slight lack of red relative to green, so whites and greys can have a faint greenish tint. It’s not a strong colour cast, but measurements clearly show it. There are also small luminance deviations in SDR: some parts of the image are slightly brightened, and the deepest tones aren’t always reproduced evenly. In HDR the TV stays much closer to the reference, although it occasionally lifts detail from the shadows. These are generally things that can be refined. The factory film mode provides a good starting point, and calibration will reveal how much more you can get out of it.

What was saved in the QNED86A6A is undoubtedly the colours. After calibration, the white balance was set with great precision, ensuring that deviations on the Colour Checker palette mostly did not exceed the visibility threshold for the human eye. In other words – the colours finally looked natural, without strange yellow or orange tones that had previously marred the perception. Unfortunately, even the best calibration cannot overcome structural limitations. The already mentioned very modest number of local dimming zones and their unfortunate placement meant that the analysis of the EOTF curve in films still showed noticeable scene over-exposures. The image tended to flatten, lacking cinematic depth. Fortunately, this effect is not as visible in older productions or in SDR content. There, calibration really does its job and allows the QNED to be tamed so the image can be pleasing. However, the specifics of this construction – especially the contrast issues – cannot be completely bypassed.

After calibration the Philips OLED811 delivers an image very close to the reference. We managed to even out the white balance and remove the slight colour cast visible in the factory settings. ColorChecker errors for SDR and HDR fell to around 1 to 2, with many samples even below 1. That's a level at which differences from the reference are hard to spot with the naked eye. We also improved the gamma, with only a slight lift remaining in the brightest whites. In HDR the EOTF curve also stays close to the reference, although the TV still tends to slightly boost the brightness of small details, such as stars or subtitles. That gives the picture a bit of extra brightness that shouldn't be there, but otherwise it's hard to find fault. It was already good out of the box, and calibration allowed us to iron out most of the remaining issues.

If someone is worried about potential "steps" when blending colours, the QNED86A has a simple solution for that. Just turn on the feature called Smooth Gradation and set it to the medium level. Then the TV really smooths out all those unwanted transitions – especially in older productions – and it does so in a way that the film grain doesn’t disappear, nor do any strange artefacts appear. In other words, you can use it without any worries.

The upscaling itself also turns out quite well. Of course, there are no miracles here – with poorer quality sources, you can notice characteristic jagged edges. Fortunately, there is a sharpness slider in the menu, and if someone prefers a more "soft" image, it can be quickly adjusted to their own taste.

The OLED811 handles processing lower-quality material reasonably well, though it's far from perfect. The "Banding reduction" function helps smooth tonal transitions and on the low setting gives a pretty good effect. It doesn't remove banding between shades as effectively as similar solutions from some competitors, but at least it doesn't introduce new artefacts. It's a sensible setting for everyday viewing. Still, there's a bit of a letdown, because the MediaTek Pentonic 800 chipset used here can, in other manufacturers' hands, deal with the effects of heavy compression more effectively even at similarly low settings. A lot therefore depends on how a given manufacturer uses its capabilities.

We have a few more comments about the upscaling to 4K. There's plenty of detail, but overall the image looks rather soft. Edges are heavily smoothed, so the picture lacks some sharpness and clarity. You can partially correct this with the sharpness slider in the menu, though that will be extra edge enhancement rather than recovering detail. On the plus side, there's no overscan, and even with an SD signal the TV doesn't crop the edges of the picture.

QNED86A has been equipped with a 120 Hz refresh rate panel, so right from the start, it can be said to be suitable for both sports and gaming. And indeed it is – the picture looks smooth, and motion blur isn’t too much of an issue. IPS panels have always had a bit of a problem with this, and here too you can sometimes notice slight blurring, especially in very dynamic scenes, but it’s not something that ruins watching a match or a fast-paced game. For cinema and sports fans, LG has included the traditional TruMotion smoothing feature. In the menu, we have two sliders – one for movies (De-Judder), and the other for sports (De-Blur). The first adds missing frames and allows you to adjust the character of motion – from raw, cinematic to a more fluid, “theatrical” feel. The second improves sharpness during dynamic actions, so it’s worth turning it up a bit if you watch a lot of sports.

In terms of motion handling the OLED811 performs superbly. At 120 Hz, which is useful for console gaming and watching sport, the image remains clear and moving objects don't leave noticeable trails. The OLED's fast pixel response helps here. You can see it clearly in the UFO test, even on a dark background. There are also controls for motion smoothing. In movies you can adjust the strength of smoothing to your taste, from preserving a cinematic feel to much smoother motion. A separate blur-reduction control is useful for fast-paced content like live sports broadcasts.

When it comes to gaming, the LG QNED86A6A is a complete tool. It features four HDMI 2.1 ports with a full bandwidth of 48 Gb/s, which means that whether you connect a PlayStation 5, an Xbox Series X, or a powerful PC – everything will work in full 4K at 120 Hz with support for all functions. This is a significant advantage, as some competitors still only feature two such ports, which can be troublesome when dealing with multiple devices. It also includes VRR, or variable refresh rate, which eliminates screen tearing, and ALLM, which automatically activates game mode when the console powers on. Dolby Vision Gaming is included as well, alongside proper implementation of the HGiG format, so titles that support these formats look livelier and more detailed. Additionally, there's the Game Optimizer – a kind of control centre for gamers. From this interface, you can view image parameters in real time, quickly switch modes, activate additional features, or adjust picture settings to your own preferences. The LG QNED86A6A has basically everything you would expect from a modern gaming television.

The OLED811 has almost everything you’d expect from a TV for gaming. It supports 120 Hz at Full HD, 1440p and 4K, and when connected to a PC it can reach up to 165 Hz. It also offers VRR to help avoid screen tearing when frame rates fluctuate, and ALLM, which automatically switches to game mode. So you don’t have to go into the settings every time you start your console.

Another plus is the properly working HGiG, which ensures that once HDR is set on the console the TV doesn’t apply its own changes to image brightness. The Game Bar is also available, letting you check signal parameters and quickly change settings useful while gaming. The list even includes Dolby Vision for games, but there’s a significant catch here, which you’ll read about below.