LG NANO81A / NANO80A vs Hisense A6Q

If you're hoping that HDR on the NANO81A will bring tears to your eyes, I have to disappoint you. This TV is just too dark to show what this format is really about. With a brightness of only 250 nits, HDR really only exists on paper here. In practice, during viewing, it's very hard to tell whether we're watching material in high dynamic range or regular SDR – it simply lacks that “punch” of light in the bright parts of the image. But, to balance out the criticism, we do have one light at the end of the tunnel – and quite a distinct one at that. It's about colour gamut coverage. Here, the NanoCell filter shows that it's not just marketing nonsense. Our measurements indicated that the coverage of the DCI-P3 space is around 88%. That's a really solid result, placing this model significantly above typical budget models based on regular white LEDs without any filters. Of course, it still lags a bit behind QLED TVs or advanced panels with PFS filters, but for this price range, the colours are surprisingly saturated and vibrant. It’s just a shame that this low brightness doesn't allow them to fully “spread their wings” with the Nano filter.

Unfortunately, the Hisense A6Q is hard to recommend for watching HDR content. The main issue remains the low brightness and quite modest coverage of a wide colour gamut. A measured brightness of about 300 nits simply isn't enough for HDR materials to look impressive. In practice, the image often resembles standard SDR rather than true HDR with clear differences in brightness and dynamics. Additionally, colours in such content do not appear as they should. The TV does not utilise additional filters like QLED or PFS LED, and a DCI-P3 coverage of around 80% makes some colours look just too pale. As a result, some scenes in HDR materials lose intensity and spectacle, making it hard to talk about a proper HDR experience.

For every film fan, the natural choice in LG televisions is the Filmmaker Mode. It is designed to show the image as the director intended – without unnecessary "enhancements". Unfortunately, in the case of our test unit NANO81A, the factory settings left a bit to be desired. The main issue turned out to be the white balance. Measurements revealed a distinct deficiency of blue, which in practice meant that many scenes had a slightly yellowish, even "yellowed" tint. The white wasn’t perfectly clean, which took away the freshness of the image. Additionally, the brightness management wasn't perfect either – the factory-set gamma was too low. The image often appeared oversaturated, as if it had been pulled too much from the shadows, which detracted from its naturalness and depth. Fortunately, LG, even in this relatively low price range, does not block access to advanced settings. The calibration options for this model are extensive, which is a significant plus for those who enjoy "fiddling" in the menu. We decided to approach the matter our way and see how much we could squeeze out of this panel with professional calibration.

We conducted the tests in the best available mode, which is Filmmaker, however – as is often the case – this does not mean the image is perfect straight out of the box. In the case of Hisense A6Q, this mode clearly “swallowed” too much blue in everyday SDR content. In practice, this led to an image with yellowed whites, particularly noticeable on large, bright surfaces. This does not result from poor assumptions of the Filmmaker mode itself or from the vision of filmmakers, but from factory settings that require adjustment.
Additionally, looking at the saturation characteristics and gamma curve in SDR, as well as EOTF in HDR content, there is a slight tendency to brighten most scenes. As a result, the image often appears brighter than it should, losing a bit of its naturalness. For this reason, we decided to perform a professional calibration to restore the proper colour balance and a more accurate brightness characteristic.

After calibration, the NANO81A is a completely different television. What LG offers in terms of image enhancement tools, even in such an affordable model, deserves major credit. We were able to completely eliminate that annoying yellowing of whites and make the colours natural, vibrant, and simply "real". In SDR content (i.e., regular television, YouTube, or older films), the picture now looks miles better – it’s clean, well-balanced, and no longer strains the eyes with strange hues. It’s clear that this panel has significant potential, which is simply wasted out of the box due to poor presets. However, we have one serious reservation that calibration cannot fully overcome – it's about brightness management in HDR mode. The LG algorithm in this model is very conservative. The TV deliberately dims the HDR image to avoid clipping the already weak blacks of the IPS panel. The developers faced a choice: either provide more light and accept that black would become light grey, or dial down the brightness to maintain any contrast. They chose the latter. Despite this, after our adjustments, watching anything on the NANO81 is considerably better.

Colours after calibration on the Hisense A6Q need to be evaluated in two ways, as everything depends on the type of content. In the case of SDR materials, the effect is really quite good. In daily programs, series, and movies, it’s hard to find any serious issues with colours. The yellow tint has been effectively removed, and the television has also stopped washing out the entire image. As a result, the ColorChecker test showed errors below a Delta 2 value, which are already outstanding results, allowing for a discussion of very high picture quality in standard content. Unfortunately, the situation looks much worse for HDR materials. Yes, the white balance has been corrected and the EOTF curve has been improved, but the limitations of the panel itself remain insurmountable. The lack of support for a wide colour gamut means that the television still generates quite significant colour errors. Parts of the colours simply cannot be displayed by the screen, making them look less saturated than they should. It’s a pity because even a simple PFS or QLED filter would have resulted in a significantly better end effect. The conclusion is therefore simple – for SDR content, the A6Q after calibration works really very well, while viewing HDR content on it should still be approached with caution.

It often happens that cheap 4K panels ruthlessly expose all the "dirty laundry" and imperfections in lower resolution materials. However, with the LG NANO81A, the situation is completely different. It's a really solid performer when it comes to handling content that's far from ideal. The built-in processor does a great job with upscaling. Even older recordings look quite decent on this screen – the image is coherent, cleaned of digital noise, and simply pleasant to the eye. A big plus is the gradation reduction feature, which you can find in the settings. It is exceptionally effective in combating colour banding, which is a godsend when watching low bitrate materials, such as from some streaming services or older files from the web. However, it is worth maintaining a certain vigilance. Since we are dealing with a less powerful chip than in LG's top models, too aggressive a setting for this option can sometimes result in minor artifacts or slight blurring of details. Despite this risk, I definitely encourage experimentation with this feature – in many cases, it can save the viewing experience and make low-quality material fully watchable.

Upscaling on the Hisense A6Q works really well for a TV in this price range. Lower resolution materials are correctly “upscaled” to higher resolutions, and the image remains clear without any artificial edge sharpening or the typical "over-sharpening" found in cheap models. Unfortunately, the digital processing is significantly poorer. In practice, it’s hard to talk about any advanced artifact smoothing or masking of problematic tonal transitions. In heavily compressed films—especially those from YouTube—the TV struggles with reducing compression blocks and unwanted banding, making the material's imperfections clearly visible. The A6Q scales the image well, but when it comes to digital processing, it leaves the user alone with the source quality.

In terms of motion fluidity, the NANO81A unfortunately has a bit of a hurdle. The television is based on a panel with a refresh rate of 60Hz. If you're looking for perfect sharpness in dynamic football matches or fast-paced action games, you might feel somewhat dissatisfied. With such a low native refresh rate, fast objects on the screen will always be a bit blurry.

The fluidity of motion on the Hisense A6Q is... well, quite average. It's a TV with a native refresh rate of 60 Hz in 4K, which means the movement of objects on the screen doesn't always look perfectly smooth. In dynamic scenes in films or sports, it's evident that this is not the strongest point of this model. The situation looks much better with 1080p content when connecting a console or computer, as the A6Q can then operate at up to 120 Hz. That's a big plus, especially for gamers. However, the sharpness of motion still leaves a lot to be desired, with noticeable ghosting, and the response time of the panel shows that it isn't one of the TV's strong suits.

NANO81A is unfortunately not a device designed with esports in mind. The lack of 120 Hz signal support is a fact that users planning to purchase this model simply have to accept. Nevertheless, LG’s engineers have worked hard to squeeze the maximum potential from this 60 Hz panel, offering a set of features that genuinely improve gaming comfort. First and foremost, the television supports VRR technology (in the range of 48–60 Hz) and ALLM. This ensures that the image remains stable and does not "tear," and the device automatically switches to low latency mode as soon as it detects a signal from a console. Managing these settings is extremely simple thanks to a dedicated system overlay that allows for a quick preview of parameters without leaving the game. A very significant advantage is support for the HGiG format. This solution is crucial for owners of modern consoles, as it allows the television to correctly "understand" the intentions of game developers regarding HDR tone mapping. In practice, this helps avoid the effect of "blown-out" bright spots, such as clouds or light sources, which is unfortunately a common issue in budget LCD televisions.

For such an inexpensive television, the Hisense A6Q really can surprise with what it offers gamers. It operates in 4K only at 60 Hz, but when the game switches to performance mode and drops to 1080p, the panel can work at even 120 Hz. In this price range, that's a big plus, as most titles on consoles don’t deliver a stable 4K at 120 frames. In practice, we are realistically gaming in 1080p, and here the A6Q provides a very enjoyable gaming experience. Additionally, it has a few features that are usually found in more expensive models: ALLM, VRR, and Dolby Vision Gaming for Xbox Series X/S. Everything is gathered in one place, in a simple and convenient Game Bar, so you don't need to dig through the entire menu. For such an affordable piece of equipment, it's really a solid setup for gamers — maybe not for the most demanding, but definitely spot on for occasional gaming.