LG 55 B4 vs Haier K85F

The brightness results in HDR materials LG B4 are very good. It is true that none of them exceed 1000 nits, although the luminance stability is excellent and looks practically the same in every scenario. The only moment where the tested television performs worse is the last scene, although this should not come as a surprise. Large frames filled with a lot of white have always been, and will likely continue to be, somewhat of a weakness for OLED televisions. However, the combination of perfect contrast, black levels, and brightness in the LG B4 allows for a full spectrum of the HDR effect. Additionally, the incredibly high coverage of the DCI-P3 colour gamut, which reached 99%, deserves recognition. As a result, colours look incredibly vibrant and stunning.

Let’s now move on to one of the hottest topics in the world of televisions, which is the quality of HDR performance. In the case of the Haier K85F model, we unfortunately have to make it clear: if you’re looking for equipment to watch content in a wide dynamic range, you should steer clear of this model. The main issue is its very low peak brightness, which during our tests barely reached 250 nits. To give you a better idea of what that means – this level is fine for watching standard SDR content, but it’s absolutely insufficient to show any real benefits of HDR. The image simply doesn’t have the "power" to generate bright, striking highlights. All of our measurements and tests on specialised test patterns confirmed this. As if that wasn’t enough, the television also struggles with colour reproduction. In this budget build, there are no technologies that broaden the colour gamut, such as quantum dot layers (marketed as "QLED"). As a result, the coverage of the DCI-P3 colour space, which is crucial for HDR content, is only around 80%. In practice, this means that the image will not only be dark but also devoid of the vibrant, saturated colours that the director wanted to show us.

The best factory mode prepared by the manufacturer is "Filmmaker," and we used it throughout the entire testing procedure. We must admit that the unit we received straight out of the box had quite decent colour reproduction. The biggest issue in both SDR and HDR content turned out to be white balance. In the former, there was a strong dominance of red, resulting in a noticeable yellow tint in the displayed image, particularly evident on skin tones and whites. In high-quality materials, this colour was also pronounced, but due to a lack of blue, there were also signs of green visible. Besides these shortcomings, we also encountered issues with greyscale and the colours themselves.

Alright, how does the television handle colours straight out of the box, without any intervention from our side? The Haier K85F offers a whole range of picture modes, such as Dynamic or Eco, but for anyone wanting to watch films according to the creators' intentions, there's essentially only one that matters: Film mode. This is where we focused our tests, and unfortunately, its name has little to do with reality. The picture on factory settings is very far from what we could call cinematic fidelity and requires many adjustments. Let's start with the white balance, which has a clear deficiency of red colour. In practice, this means the entire image has a cool, bluish tint. Even worse is the issue of brightness management, that is, the gamma curves (for SDR) and EOTF (for HDR). Their graph resembles a true rollercoaster, which terribly impacts the viewing experience. This results in unnatural dimming of SDR content, causing details in the shadows to be lost, and in the case of HDR – an excessive brightening that further exacerbates the problem of clipping. Such a combination, which consists of too cool white combined with chaotic brightness and too much blue colour saturation, leads to enormous errors in colour reproduction. Our measurements on a specialist ColourChecker chart showed errors (Delta E) regularly reaching and exceeding values of 8-9. To put it simply: errors above the threshold of 3 are easily noticeable to the naked eye, so such a result means that the colours on the screen are simply heavily distorted.

LG B4 has been providing very advanced calibration tools in its TVs for years. We can even say that as the only manufacturer on the market, it allows for such deep intervention in image adjustment. Thanks to these, we were able to calibrate the device so well. The evidence of this is the extremely low deltaE errors, which can be said to stand at a reference level. Both SDR and HDR materials now look exactly as the film director intended. It is no coincidence that TVs of this brand are most often used as preview screens for various graphic or post-production studios.

No good, but can anything be done about this picture? Is professional calibration able to save the situation? The answer is both yes and no. It needs to be said clearly that there are certain things we cannot overcome. The limitations of the construction itself, namely a poor panel and its narrow colour coverage, mean that you can forget about a sensible HDR effect – we won't be pulling the wool over your eyes on that. The biggest beneficiary of our adjustments is undoubtedly the SDR mode, and it is for watching such content, after calibration, that this television starts to make sense. We managed to tame the white balance in our own way. Although the television only offers basic, 2-point adjustment (rather than precise, 20-point), it's not perfect, but we successfully eliminated that unpleasant, cold "chill" in the picture. Above all, though, we noted a huge improvement in brightness management. The gamma curve, which previously resembled a rollercoaster, looks like an almost perfectly straight line after calibration. This is a sign that the television can finally display an image without artificially dimming or brightening it. The conclusion is simple: even with such a cheap television, professional setting correction can achieve a great deal and extract the maximum potential from it.

In this paragraph, we will take another look at the tonal transition smoothing feature, but we will also check how the TV handles lower quality material. As we have managed to check, the setting responsible for smooth gradation works quite effectively, although it has its weaker moments. While the feature works well with SDR content, it becomes less useful with HDR content. Even at the lowest of options, it blurs essential details, so we advise against using it.

The image scaling on LG B4 is rated fairly moderately positively. Although there is no edge splitting, the image itself is naturally "soft". We can change this by adjusting the sharpness slider.

Let’s move on to digital processing and image scaling, specifically how the Haier K85F handles lower resolution signals, such as from regular television. Right off the bat, we encounter an incredibly annoying and completely incomprehensible issue – the overscan is enabled by default. This means the television artificially enlarges the image, cutting off its edges on every source, even 1080p. To see the full frame, you have to dig into the screen settings each time and manually switch the format to "stretch to 16:9." It's a minor detail, but devilishly frustrating. The scaling of content to 4K resolution can be described in one word: acceptable. And that's about it. The image processor doesn't strip detail from the image, nor does it generate jagged edges or other artifacts. It simply does its job, without any bells and whistles. It’s alright, but nothing more. The most significant and noticeable shortcoming in the digital processing section is, however, the absence of a tone transition smoothing feature. This is an algorithm that could significantly reduce the annoying banding effect we mentioned earlier. Unfortunately, the manufacturer did not foresee such a solution, condemning us to watch the imperfections of the panel and low-quality material in all their glory.

The maximum refresh rate we can set on the LG B4 is 120 Hz. This is the absolute minimum for those who require high image smoothness. The manufacturer has implemented a multi-level motion smoother called "TruMotion". It has been divided into two separate sliders that adjust the sharpness of moving images (De-Blur) and stuttering (De-Judder). Both sliders can be set in the range from 0 to 10, with each level affecting the degree of smoothness, so everyone can find their sweet spot.

The LG OLED B4 panel features an average response time of 0.1 ms (which directly results from our measurements), allowing for an incredibly clear image, unattainable for LCD TVs, which have response times of even several milliseconds. This can be clearly seen in images from the "UFO Test", showing no trace of blur trailing behind the object.

The panel in the K85F model operates at a native refresh rate of 60 Hz, which sets certain expectations for image smoothness right from the start. However, we must admit that we were very positively surprised when we found two separate motion control sliders in the settings menu: one labelled "Motion Blur Reduction" and the other "De-Judder." Such generosity in this price segment is an absolute rarity, as manufacturers usually offer at most one shared option. Unfortunately, our enthusiasm faded as quickly as it appeared. It soon became clear why Haier was so "generous" – the slider responsible for reducing motion blur is simply a decoy. Sliding it makes absolutely no visible difference on the screen, so only one of the two options works.

The LG B4 television is equipped with four full-fledged HDMI 2.1 ports with a full bandwidth of 48Gbps. All functions corresponding to this standard activated without any issues, and throughout the entire testing procedure, they caused no problems. The combination of such extensive functionality and low input lags leads us to say that the tested television is truly designed for gaming. This is not surprising, considering that the manufacturer has always placed great emphasis on this. Therefore, we can enjoy both a properly implemented HGIG mode and gameplay in Dolby Vision with low latency. Such a tandem will surely attract the attention of all passionate gamers for whom quality is the most important.

A standard feature in televisions from the Korean manufacturer is also the implementation of GameBar, allowing for quick adjustments of settings "on the fly," without the need to exit the game. It also enables image adjustments for individuals with visual impairments, which is an extremely nice touch. Another important piece of information is that when the VRR technology is turned on, we will not experience a drop in contrast. This is, of course, due to the construction of the panel and the lack of conventional backlighting. However, it is normal for shades of grey to flicker slightly, although this is a characteristic feature of this function regardless of the manufacturer and the television.

In summary: The LG B4, like all OLEDs from the manufacturer equipped with 120Hz panels and HDMI 2.1 ports, creates a harmonious whole with the console. In practice, it is a complete television, and if we expect the highest possible efficiency in gaming, the B4 will be the ideal choice.

Let’s move on to the features for gamers, although we must point out straight away that this is more of a proposal for the "occasional" ones. The manufacturer does boast in the specifications about having HDMI 2.1 ports, which looks impressive on paper, but in reality, it’s largely a marketing ploy. What good is a modern port when the heart of the television is a panel with a refresh rate of 60 Hz? It physically cannot display a signal at 120 frames per second, even at lower resolutions, which takes away HDMI 2.1’s key advantage. What a shame. (That’s why in our tests we note this as HDMI 2.0 ports). Another odd issue is the TV's response to an attempt to calibrate HDR from the console. Changes to brightness settings result in very unnatural image behaviour, which could suggest incorrect implementation of the HGiG standard. To be honest, one shouldn’t worry too much about this, as we have repeatedly mentioned, we simply do not recommend using any HDR content on this screen. However, to counterbalance the negatives, the Haier K85F does have two big and unexpected advantages. The first is the presence of ALLM, or automatic game mode, which switches the TV to low latency mode as soon as it detects a connected console. The second, even bigger surprise, is support for VRR, or variable refresh rate. While it operates within a very modest range of 48-60 Hz, its mere presence is commendable. Thanks to this, the image in games can “tear” less, which realistically improves the gaming experience.