IFFALCON U85X vs LG MRGB85B

iFFALCON U85 handles HDR in a rather dual manner – on one hand, it can surprise with a solid peak brightness of around 650 nits, which places it significantly above average in this price segment. This is particularly evident in bright, full-screen scenes. Examples from movies like Life of Pi or the final test sequences from The Meg prove that the television can maintain the power and essence of the HDR effect when the entire panel needs to “ignite,” providing truly satisfying experiences. However, problems arise in high-contrast scenes, where smaller, bright details appear on the screen; the dimming algorithms prioritise black depth so much that they can crush the brightness of small bright points down to just 100 nits, drastically lowering the image dynamics and depriving us of the real “bite” we expect from HDR standards. However, the question of colours remains a sweetener, as thanks to the use of the PFS phosphor filter (marketed as QLED by the manufacturer), they look very good, achieving nearly 94% coverage of the DCI-P3 colour gamut, which allows for a rich and vivid image in most content.

LG MRGB85 offers moderate brightness. On test patterns it reaches around 700 nits, which is a decent result in itself. In real movie scenes, however, values are lower and most often fall in the 400 to 600 nits range. Bright, wide shots look best. In scenes with large areas of black the TV noticeably reduces luminance, attempting to keep contrast as high as possible. The HDR effect is therefore visible, but it is far from the level offered by more advanced Mini-LED designs. Particularly in darker parts of films, the limitations of the edge-lit backlight and imprecise local dimming become apparent again.

HDR colours

A much stronger suit of the MRGB85 is its colour. The TV covers around 95% of the DCI-P3 colour space and 74% of BT.2020, so HDR content can look vivid and impressive. Colours are well saturated, and the difference compared with basic LCD TVs is clearly noticeable. It is worth noting, however, that this is not a classic RGB backlight, where each of the three primary colours is generated by a separate diode. Red is produced by a PFS phosphor, which expands the palette and achieves more saturated red tones. This solution performs well for colour reproduction, but it does not change the limitations of the local dimming. The diodes are not driven independently in the way the series name might suggest... so it turns out that Mini RGB is not the same as Mini-LED RGB!

We tested the factory colours in the iFFALCON U85X model in “Film” mode, which is definitely the most accurate among all available settings, although it is still far from perfect. The main issue that catches the eye in both SDR and HDR content is the improper white balance – an excess of blue and red contributes to a slight purple tint in the image, detracting from the naturalness of the film scenes. An even greater challenge is how the television manages its brightness. Analysing the gamma chart for SDR signal, we noticed significant instability: instead of adhering to the standard value of 2.4, the device oscillates around 2.2, then suddenly makes an unnatural jump to around 3.0. In practice, this leads to confusing effects – large, bright surfaces on the screen appear too dark, while smaller elements are unnecessarily brightened. A similar characteristic can be found in the EOTF curve, which makes the image unpredictable and loses its cinematic authenticity.

We tested the TV in Filmmaker Mode because, of the available presets, it produced the image closest to reference. The out-of-the-box colour reproduction wasn’t perfect, though. The biggest deviations were in the white balance, with too much red and not enough blue in the image, so the overall picture shifted noticeably towards warmer tones. Whites took on a slightly yellowish tint, and skin tones and bright areas didn’t always look natural. It wasn’t a fault that ruined the viewing experience, but in a direct comparison with the same panel after calibration the difference was clearly visible.

After professional calibration of the movie mode, we must admit that the effect is more than satisfactory – the iFFALCON U85X undergoes a true transformation here. Colour errors in SDR content have dropped to a level below 2, making them practically undetectable to the human eye. We managed to set the white balance almost perfectly, and brightness management (gamma) has become almost exemplary. As a result, with standard quality materials, the television simply looks perfect and it's hard to fault it.

In the case of HDR signal, the situation has also improved significantly, although here the nature of the device is a bit more noticeable. Colour errors have been reduced to around 3, which is an outstanding result in this price range. It's worth taking a look at the EOTF chart (available on the right side of the screen in filters: 4K HDR, gamma / EOTF) to see what is not immediately apparent regarding brightness management by the U85. Though the reference line looks decent, in actual film scenes the television still interprets the signal “in its own way” due to very aggressive local dimming zone algorithms. Does that disqualify this model for watching HDR content? Absolutely not. It’s simply a typical issue with nearly every Mini-LED that has to balance high brightness with the attempt to maintain deep blacks. One just needs to be aware of these technical limitations, which are unavoidable in this segment.

Calibration primarily corrected the white balance and removed the previously noticeable warm cast. After the correction, whites no longer had a yellow tint and colours became more neutral and natural. The biggest improvement was seen in SDR material, where the picture looked even and much closer to the reference. A similar effect was achieved in HDR. After calibration the image became more controlled, although not all of the TV’s limitations could be eliminated. The main issue remained intense reds, which were not always reproduced with sufficient precision. In practice the MRGB85 handles everyday SDR content very well, but in more demanding HDR material its limitations are still clearly visible.

When it comes to scaling images to 4K resolution, the iFFALCON U85X performs solidly. The device effectively boosts low-quality signals, making even older materials look clean and clear on the 4K panel. At extremely low resolutions, such as 480p, you can notice slightly jagged edges (especially on thin lines), but let’s be honest – this is a scenario you'll only encounter while watching very old recordings, so in everyday use, it’s not a real issue.

On the other hand, the digital processing aimed at smoothing tonal transitions performs significantly worse. Although the menu features a function called “Gradual Smoothing”, its effectiveness is at least debatable. In practice, it does not effectively eliminate banding (colour stepping) and, worse yet, can cause more harm than good. This filter can be too aggressive where it shouldn’t be, artificially smoothing out details that shouldn’t be touched, such as the natural texture of the face or the fine details of skin texture. Instead of improving quality, this function can give the image an unnatural, “plastic” look, so it’s best to use it with caution or, preferably: leave it turned off.

Upscaling and digital image processing perform quite well in the LG MRGB85. The Alpha 8 AI 4K Gen7 processor efficiently upscales lower-resolution material, and you can easily turn off overscan regardless of the source. The TV also handles compression artefacts well. The "Smooth Gradation" function can effectively reduce visible banding and tonal unevenness, but it isn't always precise. At higher settings it can also smooth out fine details, such as the texture of materials. A plus is that it doesn't remove film grain. The safest option is the "Low" or "Medium" setting, which offers the best compromise between artefact reduction and preserving detail.

Unlike budget constructions that can resemble a slideshow in dynamic sports scenes, the iFFALCON U85X is a heavyweight player equipped with a panel featuring a native refresh rate of 144Hz. It's worth remembering that in the realm of movies, series, or sports, we'll predominantly operate at 120Hz due to the specifics of image enhancement systems. Such a fast panel is excellent news for gamers and sports fans, as it opens the door to advanced motion settings that simply aren't available in cheaper 60Hz models.

Everything is managed from the menu “Motion Clarity”, where instead of using ready-made, often overly aggressive modes, we strongly recommend a custom configuration based on two sliders. The most important of these, Flicker Reduction, is responsible for fluidity in films – here, it's best to aim for a value around 4, which helps maintain the natural, cinematic character of motion without falling into the artificial “soap opera effect.” Meanwhile, the first slider, Motion Blur Reduction, is key to success in sports broadcasts. In this case, it's worth going all out and setting it to maximum, ensuring that the image remains sharp during fast-paced action on the field, while annoying ghosting is eliminated.

The LG MRGB85 is fitted with a VA panel with a native 144 Hz refresh rate, so its motion handling is very good. The TV easily handles 120 Hz content from consoles and higher refresh rates when connected to a PC. That matters not only for gaming but also when watching sport, where camera motion is noticeably smoother than on basic 60 Hz panels. There’s also the TruMotion system, which lets you set the level of motion smoothing yourself. You can keep a more cinematic motion or increase smoothness, which works well for live sports and TV programmes. The adjustment range is wide, so you can easily tailor the motion smoothing to your own preferences.

iFFALCON U85X is an outstanding piece of gear for gamers that has pretty much everything you could ask for from a modern screen for console or PC. It features two full-fledged HDMI 2.1 ports with a full bandwidth of 48 Gbps, which opens the door to key technologies such as VRR and ALLM, ensuring smooth gameplay without screen tearing and with minimal lag. The TV effortlessly handles high refresh rates at various resolutions, and a real curiosity is the mode that allows for up to 240Hz when dropping down to Full HD quality. Everything is managed by the Game Bar (which is a faithful copy from TCL), allowing for instant switching of picture modes, personalization of the interface appearance, or even adding a virtual crosshair in the middle of the screen.

When it comes to gaming, the LG MRGB85 performs by far the best. The manufacturer hasn’t skimped on the kit and has essentially carried over the full suite of features from pricier TVs into this model. You get three HDMI 2.1 ports with full 48 Gb/s bandwidth. Each supports 4K 120 Hz from a console, and when connected to a PC also 4K 144 Hz. So you don’t need to worry which port to plug your console or PC into, as they all offer the same set of capabilities.

On board you’ll also find VRR, AMD FreeSync Premium, NVIDIA G-Sync Compatible, ALLM and HGiG. Dolby Vision Gaming is included too, allowing supported games to use high refresh rates and dynamic HDR simultaneously on Xbox. Rounding it off is Game Optimizer, a handy in-game menu. Without leaving the game you can change the picture profile, brighten shadow detail or check the current frame rate. In terms of gaming features, the MRGB85 therefore offers almost the same as significantly more expensive LG models.