Hisense UR9S vs Philips PQS9011 / PQS9001 (The One 2026)

Hisense UR9S is without doubt a show of force from the Chinese manufacturer when it comes to luminance. On a synthetic test pattern the panel hit as much as 2600 nits, which is an impressive result. But it’s important to clearly separate laboratory results from filmic realities. In real-world content the UR9S behaves much more restrained. Peak brightness in balanced scenes hovers around 1500 nits. In demanding, dark shots, where algorithms must both preserve deep blacks and precisely light small details, brightness can fall drastically, even to around 400 nits. The discrepancy between the chart and reality is therefore huge. This is a direct consequence of conservative local dimming behaviour. When a bright object occupies a large part of the frame, the system can easily maintain a high brightness level. However, in night scenes the priority becomes protecting blacks and fighting halo artefacts (unsightly glows around bright edges). To avoid contrast degradation the TV drastically limits light output. Even so, the UR9S can still produce a very powerful, engaging HDR effect that impresses in bright, spectacular sequences.

Colour gamut coverage

On test patterns the Hisense UR9S performs excellently in terms of colour. DCI-P3 coverage is almost 100%, and the wide BT.2020 as much as 93%. Those are figures even the best QD-OLED TVs don't reach. But again, synthetic measurements are one thing, films and series are another. In real-world scenes the figures dropped to 93% for DCI-P3 and 81% for BT.2020. That’s still a great result, but the advantage of RGB Mini LED is no longer as dramatic as manufacturers promise in marketing materials. One could even say their capability is now close to that of quantum-dot-equipped TVs, the so-called QLEDs. So why is that? To a large extent, colour reproduction here depends on the way the backlight zones operate. When a strongly saturated colour appears next to white or another, more complex element, a single zone must handle both parts of the image at once. Under such conditions the backlight can't maintain extreme saturation of a given colour on the screen, because the emitted light takes on a character closer to white. In the UR9S this has been refined quite well, but still not enough for the TV to maintain such high colour saturation in every situation.

The Philips PQS9000 is a moderately bright TV — in our HDR scenes it reached roughly 450 to just over 500 nits. That’s enough to notice a difference compared with SDR. Sun reflections, lamps or flares have a bit more punch than on basic TVs, whose brightness often tops out around 300 nits. It’s not, however, a level where bright elements look especially striking. The biggest limitation remains contrast. Without local dimming, brightening a bright object also lifts the black level around it. So there’s no clear separation between strong highlights and a dark background, and it’s that kind of pairing that really shows what HDR can do. The PQS9000 offers more than the cheapest models, but despite decent brightness the effect remains fairly basic.

Colours

Philips deserves praise for the colours. Although the manufacturer markets this model as QLED, it actually uses a PFS phosphor instead of quantum dots. The solution itself doesn’t prevent good results. On test patterns and in measurements of film scenes we recorded about 94% DCI-P3 coverage and 75% BT.2020. For this class of TV that’s really good. In practice this means the vast majority of colours used in HDR films and series will have appropriate saturation. Lush greens or intense reds aren’t a problem and add appeal to the picture. Limitations are easier to notice in some games and rarer content that use the most saturated shades of the wide BT.2020 gamut. In those situations, displays with wider colour coverage, such as SQD or RGB LED, can show more. At its price point the PQS9000 has nothing to be ashamed of.

We tested the Hisense UR9S in Filmmaker Mode, which out of the box provides the best image reproduction. In HDR content the TV performed quite well in that regard. The white balance didn't show major errors, and the brightness response, while following Hisense's typical curve, was kept at a reasonable level. The picture therefore wasn't overly brightened or noticeably colour-distorted. The same mode fared much worse with SDR content, the kind we watch most often, like broadcast TV or YouTube. The white balance was strongly shifted toward red and blue, giving the image a slightly pink tint. This also affected the gamma curve. Instead of approaching the reference value of 2.4, it was closer to 2.0, which made the image look too bright, especially in midtones and darker areas. Filmmaker Mode therefore remains the best out-of-the-box choice, but it's not without flaws.

The factory picture settings for Movie mode on the PQS9000 unfortunately need tweaking. In SDR the biggest problem is an excess of red in the white balance, which makes whites, greys and skin tones too warm, in places even slightly pink. Gamma runs below the reference across most of the range. The TV therefore brightens midtones and highlights, making the image look flatter than it should.

In HDR the white balance itself performs significantly better. Apart from minor deviations the components sit close together, so there isn’t the same obvious tint as in SDR. The EOTF curve, however, shows a slight brightening of parts of the image, and the biggest issue appears when measuring the wide colour gamut. Many shades deviate substantially from the target, with errors reaching ΔE 8–9. The good gamut coverage we praised earlier therefore doesn’t mean the TV hits specific colours accurately. It can display a wide range of colours, but out of the box it doesn’t use that range very precisely.

After calibration, the biggest improvement was in SDR, although we also refined the HDR picture. Hisense offers plenty of calibration controls in the menu, so we were able to precisely correct the white balance and other picture errors. The most important change was removing the pink cast that had been clearly visible in SDR material. After calibration the image looks much more natural, especially in everyday content like TV and YouTube. Colour reproduction errors on the ColorChecker chart are very small after calibration. The vast majority of colours fall below values of 2–3, which is at a level very hard for the human eye to detect. The only thing we couldn't completely eliminate is the way Hisense TVs map tones in HDR. It affects how brightness is distributed in films and can subtly 'beautify' the image, rather than strictly following the creators' intent. For less experienced viewers this can create a stronger 'wow' effect, but it won't always fully match how the material should look.

Calibration brought a big improvement, especially with SDR content. We managed to even out the white balance and remove the earlier colour cast, and the Color Checker measurements now look very good. Colours are much closer to what they should be on screen, so with regular TV or SDR movies we can be happy with the result. Unfortunately HDR spoils that a bit. On the one hand it's limited by the panel itself, because calibration won't improve contrast or replace local dimming. On the other hand there are colour errors we couldn't correct because the CMS settings, i.e. colour management, were greyed out and inactive. That loses Philips points with us. The white balance can be fine-tuned, but without access to wide gamut controls you can't as effectively sort out colours in HDR. It's a shame, because the SDR results show the potential is there, but we weren't allowed to fully make use of it everywhere.

Digital image processing has been one of Hisense's strengths for the past two years, and the UR9S is no different. The manufacturer uses the Hi-View AI Engine RGB processor, which in practice is based on the well-known MediaTek Pentonic 800 platform, previously used in models such as the U8Q. The TV handles upscaling lower-resolution material to 4K very well, and copes with low-bitrate content, where various compression artefacts can easily appear. Thanks to a function called "Smooth and gradient image", the picture stays detailed without looking overly sharpened or artificially smoothed. When watching regular broadcast TV or older, lower-quality material, the UR9S can get a surprising amount out of it. In terms of digital image processing, this is one of the most finely tuned LCD TVs we've had the chance to test.

Digital image processing on the Philips PQS9000 performs well, although we have a few reservations. The "Distortion Reduction" function helps smooth tonal transitions in lower-quality sources, but it works rather unevenly. It can improve one part of the picture, only to, moments later and still within the same scene, lose its way and show banding between shades again. On the plus side, it doesn't strip away film grain or fine noise, so the image retains its texture. We found the "Medium" setting worked best and that's the one we recommend.

The upscaling to 4K itself is adequate, though the image is very soft. Edges are heavily smoothed, which may leave some viewers wanting more clarity. In that case, it's worth slightly increasing the sharpness in the TV menu, as this will help emphasise edges more. Don't overdo the sharpness slider, though, or you'll get artificial halos instead of an improvement.

The Hisense UR9S is one of the first TVs on the market with a 4K panel and a 170 Hz refresh rate. In the larger sizes, 75 and 85 inches, that goes up to 180 Hz. Such a high refresh rate will mainly benefit owners of very powerful computers. Films and TV series are still most often watched at 24 fps, and sports broadcasts at 50 fps, so in everyday use the panel's response time and the behaviour of the motion smoothing are more important. In that respect the UR9S performs very well. Panel motion blur is low, as our UFO test also confirmed. Moving objects do not leave a pronounced smear, so the picture remains clear even in fast scenes.

In terms of motion handling the Philips PQS9000 performs exceptionally well for an LCD TV. It's not just about the 144 Hz refresh rate, but above all how quickly the panel itself responds. At 120 Hz you can hardly see the typical trailing smears behind moving objects. What's particularly pleasing is that this also applies to darker backgrounds, where many VA panels clearly struggle. Here motion remains clear, and in this respect Philips has pleasantly surprised us.

The "Motion Styles" feature is used to adjust how motion is displayed. It includes two sliders: "Smoothness" and "Blur Reduction", allowing you to tailor the effect to the material you're watching and your personal preferences. Our suggested settings are shown in the photo. Treat them as a starting point and see which level of smoothing suits you best.

The Hisense UR9S is very well set up for gaming. All three HDMI ports are HDMI 2.1 and offer the full 48 Gb/s bandwidth. The TV supports 4K at 170 Hz, and on larger screen sizes even 180 Hz. You also get VRR, ALLM, NVIDIA G-Sync and AMD FreeSync, so it's hard to fault the basics. PC gamers can additionally enable DLG mode. After switching the resolution to Full HD the refresh rate can rise up to 330 Hz. That's more of an option for a narrow group of users, but it shows how much headroom the panel has. Hisense also added a Game Bar, where you can quickly change the main settings, check the refresh rate, or enable a crosshair and minimap zoom.

The biggest drawback remains the lack of a properly working HGiG implementation. The TV still uses its own tone mapping, which makes setting up HDR on consoles a bit awkward. In our case values around 1500–2000 nits worked best, but it's worth checking which setting keeps all the detail in the brightest parts of the image.

Features for gamers

In terms of gaming features the Philips PQS9000 has a lot to offer. Four HDMI 2.1 ports let you connect multiple devices without having to choose which one gets the full capabilities. Consoles can use 120 Hz at Full HD, 1440p and 4K, and a PC can also run 144 Hz at 4K or 240 Hz if you drop to Full HD. There's also VRR, which matches the refresh rate to the frame rate and prevents screen tearing. Its range runs from 48 to 240 Hz, with the upper limit applying to Full HD mode.

It also includes ALLM, so the TV switches itself into game mode, and a properly working HGiG, which is handy when setting HDR on the console. There's a Game Bar for quick access to settings and signal information. The list even includes Dolby Vision gaming, but it's hard to enjoy because of very high input lag. Apart from that caveat, the feature set is really solid.