Hisense UR9S vs Hisense U7S / U77SE

Hisense UR9S is without doubt a show of force from the Chinese manufacturer when it comes to luminance. On a synthetic test pattern the panel hit as much as 2600 nits, which is an impressive result. But it’s important to clearly separate laboratory results from filmic realities. In real-world content the UR9S behaves much more restrained. Peak brightness in balanced scenes hovers around 1500 nits. In demanding, dark shots, where algorithms must both preserve deep blacks and precisely light small details, brightness can fall drastically, even to around 400 nits. The discrepancy between the chart and reality is therefore huge. This is a direct consequence of conservative local dimming behaviour. When a bright object occupies a large part of the frame, the system can easily maintain a high brightness level. However, in night scenes the priority becomes protecting blacks and fighting halo artefacts (unsightly glows around bright edges). To avoid contrast degradation the TV drastically limits light output. Even so, the UR9S can still produce a very powerful, engaging HDR effect that impresses in bright, spectacular sequences.

Colour gamut coverage

On test patterns the Hisense UR9S performs excellently in terms of colour. DCI-P3 coverage is almost 100%, and the wide BT.2020 as much as 93%. Those are figures even the best QD-OLED TVs don't reach. But again, synthetic measurements are one thing, films and series are another. In real-world scenes the figures dropped to 93% for DCI-P3 and 81% for BT.2020. That’s still a great result, but the advantage of RGB Mini LED is no longer as dramatic as manufacturers promise in marketing materials. One could even say their capability is now close to that of quantum-dot-equipped TVs, the so-called QLEDs. So why is that? To a large extent, colour reproduction here depends on the way the backlight zones operate. When a strongly saturated colour appears next to white or another, more complex element, a single zone must handle both parts of the image at once. Under such conditions the backlight can't maintain extreme saturation of a given colour on the screen, because the emitted light takes on a character closer to white. In the UR9S this has been refined quite well, but still not enough for the TV to maintain such high colour saturation in every situation.

The Hisense U7S has considerable HDR potential, but it can’t make full use of it in every scene. On a test pattern it reaches about 1100 nits, so the backlight is genuinely strong. In our brighter film scenes we measured around 640 to 745 nits. That’s still enough for the sun or bright highlights to have a distinct bloom and to show an advantage over SDR material. When the TV needs to light a larger portion of the image, it handles it quite well.

The problem appears with small lights on a dark background. Each of the 192 zones covers an area considerably larger than a tiny point on the screen. If the TV were to drive such a zone strongly, it would brighten the surrounding area along with the light. Hisense tries to avoid that and dims the whole zone. Blacks look better as a result, but a small bright object that should draw the eye also loses intensity. That’s why in two tougher scenes we recorded only 297 and 154 nits. The difference is large: in one shot HDR can impress, and in the next small highlights are noticeably muted. The U7S therefore prioritises keeping deep blacks, even at the expense of bright details. With this number of zones it’s an understandable compromise, but it’s worth remembering that the peak 1100 nits tells us about the backlight’s capability, not how brightly the TV will show every element of a film.

Colours

Hisense markets the U7S as ULED, but that’s a marketing name; the wider colour gamut here is achieved by a PFS phosphor backlight. In our measurements the TV covered about 91% of the DCI-P3 space and 71% of BT.2020. Those are good results, though a little short of the best screens on the market. The biggest shortfall is in green — the TV doesn’t even reach the DCI-P3 boundary there, so the most intense green hues will be less saturated than they should be. Most colours in HDR films and series still look suitably vivid, however. A positive is the repeatability of the results: gamut coverage on test patterns and in film scenes is practically identical.

We tested the Hisense UR9S in Filmmaker Mode, which out of the box provides the best image reproduction. In HDR content the TV performed quite well in that regard. The white balance didn't show major errors, and the brightness response, while following Hisense's typical curve, was kept at a reasonable level. The picture therefore wasn't overly brightened or noticeably colour-distorted. The same mode fared much worse with SDR content, the kind we watch most often, like broadcast TV or YouTube. The white balance was strongly shifted toward red and blue, giving the image a slightly pink tint. This also affected the gamma curve. Instead of approaching the reference value of 2.4, it was closer to 2.0, which made the image look too bright, especially in midtones and darker areas. Filmmaker Mode therefore remains the best out-of-the-box choice, but it's not without flaws.

Factory colours on the Hisense U7S are decent, but there are a few things to fix. In SDR the white balance favours red, so the image looks too warm, in places with a slightly pink tint. You can see this on faces and bright, neutral surfaces. Gamma also runs below the target, so the TV brightens the image, especially in darker areas. That makes it easier to see shadow detail, but the scene loses some of its depth.

In HDR the white balance is a bit more even, but not completely neutral, with midtones lacking blue and the brightest parts lacking red. A bigger problem is the way brightness is reproduced. The EOTF curve shows that a large portion of the midtones is boosted, making the image appear brighter than the source material intends. Color Checker measurements also fare worse than in SDR: many errors are around 3 to 4, and individual ones reach as high as 8. Colours can therefore look attractive, but they're not always faithful to what we should be seeing. There’s room for improvement and we’ll see how much can be corrected with calibration.

After calibration, the biggest improvement was in SDR, although we also refined the HDR picture. Hisense offers plenty of calibration controls in the menu, so we were able to precisely correct the white balance and other picture errors. The most important change was removing the pink cast that had been clearly visible in SDR material. After calibration the image looks much more natural, especially in everyday content like TV and YouTube. Colour reproduction errors on the ColorChecker chart are very small after calibration. The vast majority of colours fall below values of 2–3, which is at a level very hard for the human eye to detect. The only thing we couldn't completely eliminate is the way Hisense TVs map tones in HDR. It affects how brightness is distributed in films and can subtly 'beautify' the image, rather than strictly following the creators' intent. For less experienced viewers this can create a stronger 'wow' effect, but it won't always fully match how the material should look.

Calibrating the Hisense U7S did the most for SDR content. We managed to even out the white balance, so the earlier warm tint is gone and whites and greys look neutral. Gamma now sits very close to the reference, so the TV no longer brightens the image unnecessarily and darker scenes have regained depth. Color Checker measurements confirm the improvement: most errors are below 2. For watching regular TV and SDR films, this delivers a really well calibrated picture. Calibration in HDR wasn’t as smooth. The TV lacks an effective way to correct the EOTF curve, so Hisense still interprets the film’s brightness a bit on its own. It brightens parts of the image and, depending on the scene and local dimming, can tone down the brightest elements. That couldn’t be eliminated by calibration. This also shows up in the Color Checker results, where many errors remain around 3–4 and some exceed 7. In SDR the result is therefore very good, but in HDR we have to accept that the TV adds its own interpretation of brightness to the image.

Digital image processing has been one of Hisense's strengths for the past two years, and the UR9S is no different. The manufacturer uses the Hi-View AI Engine RGB processor, which in practice is based on the well-known MediaTek Pentonic 800 platform, previously used in models such as the U8Q. The TV handles upscaling lower-resolution material to 4K very well, and copes with low-bitrate content, where various compression artefacts can easily appear. Thanks to a function called "Smooth and gradient image", the picture stays detailed without looking overly sharpened or artificially smoothed. When watching regular broadcast TV or older, lower-quality material, the UR9S can get a surprising amount out of it. In terms of digital image processing, this is one of the most finely tuned LCD TVs we've had the chance to test.

The processing of lower-quality material in the Hisense U7S is fairly average. The Pentonic 700 chipset used here doesn't cope particularly well with the effects of heavy compression. There's a "Smooth and Gradient Picture" function in the menu, but its performance leaves a lot to be desired. At the low setting it's hard to see any improvement in tonal transitions, though at least the picture doesn't suffer. Medium and high settings still don't remove visible banding between tones and begin to blur details; in our clips parts of characters' faces even vanished. Interestingly, film grain remains untouched at every level. If you do use this function, stick to the low setting. Its current performance needs refinement, but that's mainly down to the processor used here.

Upscaling to 4K performs much better. Lower-resolution content gains clarity, edges are well reproduced and fine details look sharp. That doesn't mean the TV can recover details that weren't in the recording, but it makes good use of what's provided by the source. Another plus is the lack of edge cropping, even with an SD signal.

The Hisense UR9S is one of the first TVs on the market with a 4K panel and a 170 Hz refresh rate. In the larger sizes, 75 and 85 inches, that goes up to 180 Hz. Such a high refresh rate will mainly benefit owners of very powerful computers. Films and TV series are still most often watched at 24 fps, and sports broadcasts at 50 fps, so in everyday use the panel's response time and the behaviour of the motion smoothing are more important. In that respect the UR9S performs very well. Panel motion blur is low, as our UFO test also confirmed. Moving objects do not leave a pronounced smear, so the picture remains clear even in fast scenes.

Motion handling on the Hisense U7S is decent thanks to its 144 Hz refresh rate. For films there's also a motion smoothing option with adjustable judder and blur reduction. You can keep a more cinematic feel to motion or increase smoothness if choppy camera pans bother you. High refresh is also useful for sport and gaming, but unfortunately it doesn't solve the panel's biggest problem.

The issue is pixel response time. Fast-moving objects leave long, distinct trails, as our UFO test shows. It's worst on dark backgrounds, where the trail is particularly pronounced. So motion can be smooth, but the moving object loses sharpness, and that difference on the U7S is fairly easy to spot.

The Hisense UR9S is very well set up for gaming. All three HDMI ports are HDMI 2.1 and offer the full 48 Gb/s bandwidth. The TV supports 4K at 170 Hz, and on larger screen sizes even 180 Hz. You also get VRR, ALLM, NVIDIA G-Sync and AMD FreeSync, so it's hard to fault the basics. PC gamers can additionally enable DLG mode. After switching the resolution to Full HD the refresh rate can rise up to 330 Hz. That's more of an option for a narrow group of users, but it shows how much headroom the panel has. Hisense also added a Game Bar, where you can quickly change the main settings, check the refresh rate, or enable a crosshair and minimap zoom.

The biggest drawback remains the lack of a properly working HGiG implementation. The TV still uses its own tone mapping, which makes setting up HDR on consoles a bit awkward. In our case values around 1500–2000 nits worked best, but it's worth checking which setting keeps all the detail in the brightest parts of the image.

The Hisense U7S has plenty to offer gamers. You get two HDMI 2.1 ports and support for 120 Hz in Full HD, 1440p and 4K, so modern consoles’ capabilities are well utilised. When connected to a PC you can use 144 Hz at 4K or switch the resolution to Full HD and run 240 Hz. So there’s a lot of choice, although it’s worth remembering the motion smearing mentioned earlier, which the high refresh rate doesn’t eliminate. VRR and ALLM are present as well. VRR helps keep the picture tear-free when a game’s frame rate changes. ALLM automatically switches the TV into game mode, so you don’t have to go into the menu each time. VRR works from 48 to 240 Hz, with the highest refresh rate available in Full HD. Xbox users can also play in Dolby Vision at 120 Hz. Importantly, that format does not cause significant input lag here. The Game Bar also looks great. It’s clear and attractive, and lets you quickly check what signal the TV is receiving. Handy gaming settings are close to hand too, including shadow brightening. If it’s hard to spot an opponent in a dark game, you can improve visibility without digging through the whole menu.

Our biggest complaint is HGiG. Hisense keeps doing its own tone mapping, which makes setting up HDR on the console confusing. You adjust the checkerboard pattern, and the TV continually alters its appearance. As a result, the point at which the pattern disappears does not correctly indicate the display’s brightness limit, and it’s easy to set the value too high. For this model it’s better to set the target HDR brightness on the console to around 900 to 1000 nits, rather than rely on the configurator.