Hisense UR8S vs Philips PQS9011 / PQS9001 (The One 2026)

UR8S is a higher-end Mini-LED, so you could expect plenty of brightness. Indeed, on a synthetic test pattern peak brightness reached about 2200 nits. That’s a very good result, but as always what the TV does in normal film scenes matters much more. Here the results are a bit more mixed. In bright scenes with lots of light on screen, the UR8S can deliver very strong HDR. Brightness then gets up to around 1500 nits, so the image is very intense and has a lot of punch. It’s worse with small bright elements on a dark background. The TV noticeably dims them to preserve deep blacks and avoid excessive blooming. As a result, things like single stars or small specular highlights can be only around 200 nits. And here HDR is no longer as impressive. So the local dimming algorithm works effectively, but it comes at a cost — sometimes it sacrifices the brightness of small details too much in favour of contrast.

Colours

For RGB Mini-LED TVs, colours should be evaluated a little differently than usual. If we look only at the panel’s capabilities, the UR8S performs excellently. We measured about 94% coverage of BT.2020 and virtually full DCI-P3. Those are among the highest figures currently seen in LCD TVs, and this is where the potential of the RGB backlight is most apparent. The problem is that this potential isn’t always used in real scenes. When we ran the same measurements on patterns overlaid with a film-like background, saturation of some colours started to fall noticeably. Individual zones can’t always control the three RGB components with the same precision when the scene becomes more complex. It’s most noticeable with blue and magenta. On simple test patches they can look very strong, but in tougher scenes samples of those colours clearly shrink. In other words, the UR8S has huge potential, but the TV can’t always take full advantage of it in every scene.

The Philips PQS9000 is a moderately bright TV — in our HDR scenes it reached roughly 450 to just over 500 nits. That’s enough to notice a difference compared with SDR. Sun reflections, lamps or flares have a bit more punch than on basic TVs, whose brightness often tops out around 300 nits. It’s not, however, a level where bright elements look especially striking. The biggest limitation remains contrast. Without local dimming, brightening a bright object also lifts the black level around it. So there’s no clear separation between strong highlights and a dark background, and it’s that kind of pairing that really shows what HDR can do. The PQS9000 offers more than the cheapest models, but despite decent brightness the effect remains fairly basic.

Colours

Philips deserves praise for the colours. Although the manufacturer markets this model as QLED, it actually uses a PFS phosphor instead of quantum dots. The solution itself doesn’t prevent good results. On test patterns and in measurements of film scenes we recorded about 94% DCI-P3 coverage and 75% BT.2020. For this class of TV that’s really good. In practice this means the vast majority of colours used in HDR films and series will have appropriate saturation. Lush greens or intense reds aren’t a problem and add appeal to the picture. Limitations are easier to notice in some games and rarer content that use the most saturated shades of the wide BT.2020 gamut. In those situations, displays with wider colour coverage, such as SQD or RGB LED, can show more. At its price point the PQS9000 has nothing to be ashamed of.

For evaluating the factory colours we used Filmmaker mode, which is supposed to show the image as close as possible to how the content was prepared. And if you look at the white balance alone, the UR8S performs quite well. There’s no strong tint that immediately jumps out, although as brightness increases a bit too much blue and red start to appear, with a corresponding lack of green. Colour errors are therefore visible in measurements, but the image itself doesn’t look bad.

We have much bigger reservations about how the UR8S manages image brightness. In SDR the gamma stays around 1.9–2.0 for most of the range instead of the target 2.4. In practice this simply means the image is too bright, especially in the midtones. Shadows are lifted too much, so the picture loses some depth. A similar tendency is visible in HDR. The EOTF curve sits above the reference value for a large part of the range, so the UR8S again brightens the image more than it should. This isn’t a case of the TV lacking brightness, because it has plenty, but of how it manages that brightness. As a result, HDR material can look very striking, but not always exactly as it should.

The factory picture settings for Movie mode on the PQS9000 unfortunately need tweaking. In SDR the biggest problem is an excess of red in the white balance, which makes whites, greys and skin tones too warm, in places even slightly pink. Gamma runs below the reference across most of the range. The TV therefore brightens midtones and highlights, making the image look flatter than it should.

In HDR the white balance itself performs significantly better. Apart from minor deviations the components sit close together, so there isn’t the same obvious tint as in SDR. The EOTF curve, however, shows a slight brightening of parts of the image, and the biggest issue appears when measuring the wide colour gamut. Many shades deviate substantially from the target, with errors reaching ΔE 8–9. The good gamut coverage we praised earlier therefore doesn’t mean the TV hits specific colours accurately. It can display a wide range of colours, but out of the box it doesn’t use that range very precisely.

Hisense offers quite a lot of calibration options, and in SDR you can achieve a really good result with them. After adjustment the white balance is practically even across the whole range, and colour errors fall to very low values. The UR8S can be set very precisely here. HDR looks a little different. The white balance can also be noticeably improved, although at the highest brightness levels larger deviations start to appear. Most interesting, however, is the behaviour of the EOTF curve. Even after correctly setting it on test patterns, the UR8S can still interpret brightness in its own way when watching films. Depending on the scene, parts of the picture are slightly brightened and others darkened compared with how they should look. This shows that the algorithms controlling the backlight have quite a large influence on the final image. Calibration therefore allows colours to be improved very well, but we are not able to completely 'turn off' the way the UR8S manages brightness in HDR.

Calibration brought a big improvement, especially with SDR content. We managed to even out the white balance and remove the earlier colour cast, and the Color Checker measurements now look very good. Colours are much closer to what they should be on screen, so with regular TV or SDR movies we can be happy with the result. Unfortunately HDR spoils that a bit. On the one hand it's limited by the panel itself, because calibration won't improve contrast or replace local dimming. On the other hand there are colour errors we couldn't correct because the CMS settings, i.e. colour management, were greyed out and inactive. That loses Philips points with us. The white balance can be fine-tuned, but without access to wide gamut controls you can't as effectively sort out colours in HDR. It's a shame, because the SDR results show the potential is there, but we weren't allowed to fully make use of it everywhere.

The big plus of the UR8S is its use of the MediaTek Pentonic 800 processor, and digital image processing is one of this model’s stronger points. The TV handles smoothing tonal transitions very well, especially with poorer-quality material. The feature responsible for this effect works effectively without overprocessing the picture. Even on a medium setting it can noticeably reduce visible banding and artefacts without heavily blurring details. Upscaling itself also performs very well. Lower-resolution content is displayed cleanly, edges look natural, and the image isn’t over-sharpened. The UR8S simply copes very well with weaker signals, and in that respect it’s one of its clear strengths.

Digital image processing on the Philips PQS9000 performs well, although we have a few reservations. The "Distortion Reduction" function helps smooth tonal transitions in lower-quality sources, but it works rather unevenly. It can improve one part of the picture, only to, moments later and still within the same scene, lose its way and show banding between shades again. On the plus side, it doesn't strip away film grain or fine noise, so the image retains its texture. We found the "Medium" setting worked best and that's the one we recommend.

The upscaling to 4K itself is adequate, though the image is very soft. Edges are heavily smoothed, which may leave some viewers wanting more clarity. In that case, it's worth slightly increasing the sharpness in the TV menu, as this will help emphasise edges more. Don't overdo the sharpness slider, though, or you'll get artificial halos instead of an improvement.

The UR8S is equipped with a panel that has a native 180 Hz refresh rate, so right away it offers very strong potential for smooth motion. The panel itself performs really well, although some limitations typical of VA panels are still visible. Smearing is relatively low for this type of screen, but during faster motion, especially on darker backgrounds, it can still be noticed, particularly if you compare the same image to OLED TVs.

In terms of motion handling the Philips PQS9000 performs exceptionally well for an LCD TV. It's not just about the 144 Hz refresh rate, but above all how quickly the panel itself responds. At 120 Hz you can hardly see the typical trailing smears behind moving objects. What's particularly pleasing is that this also applies to darker backgrounds, where many VA panels clearly struggle. Here motion remains clear, and in this respect Philips has pleasantly surprised us.

The "Motion Styles" feature is used to adjust how motion is displayed. It includes two sliders: "Smoothness" and "Blur Reduction", allowing you to tailor the effect to the material you're watching and your personal preferences. Our suggested settings are shown in the photo. Treat them as a starting point and see which level of smoothing suits you best.

In terms of gamer features the UR8S stacks up really well. The TV supports virtually everything you'd expect from a modern console or PC display. It has ALLM, VRR, and 4K at 120 Hz. There's also Dolby Vision in game mode, so when using, for example, an Xbox Series X you don't have to give up that HDR format. PC gamers get even more options. The panel can run at 4K and 180 Hz, and dropping to Full HD can push the refresh rate as high as 330 Hz. There's also a Game Bar that lets you quickly view key info and change gaming-related settings. The only real shortcoming is a proper implementation of HGiG. When enabled, the TV still interferes with HDR brightness mapping, so we don't get the effect intended by that standard. Apart from that, the UR8S is very well equipped for both consoles and a powerful PC.

Features for gamers

In terms of gaming features the Philips PQS9000 has a lot to offer. Four HDMI 2.1 ports let you connect multiple devices without having to choose which one gets the full capabilities. Consoles can use 120 Hz at Full HD, 1440p and 4K, and a PC can also run 144 Hz at 4K or 240 Hz if you drop to Full HD. There's also VRR, which matches the refresh rate to the frame rate and prevents screen tearing. Its range runs from 48 to 240 Hz, with the upper limit applying to Full HD mode.

It also includes ALLM, so the TV switches itself into game mode, and a properly working HGiG, which is handy when setting HDR on the console. There's a Game Bar for quick access to settings and signal information. The list even includes Dolby Vision gaming, but it's hard to enjoy because of very high input lag. Apart from that caveat, the feature set is really solid.