Hisense U8Q vs TCL C8L / QM8L

When it comes to HDR, the Hisense U8Q shows its claws. On paper, meaning in synthetic measurement tests, the TV can "push out" nearly 4000 nits of peak brightness. This is a value that most models can only envy. In practice, this translates to very strong light effects in movies – in some scenes we managed to measure real levels from 1500 to 2000 nits, which is a level usually reserved for the absolute top-tier TVs on the market.

Of course, it's not always so perfect. In small, point-like elements, brightness can drop – a good example is scene number 4 from the movie Sicario 2, where instead of thousands of nits we get about 500. But it's worth noting that the effect doesn't disappear completely – the light is still visible, and the image doesn't appear artificially dimmed. This is a typical issue with Mini LEDs, so it’s hard to consider it a major drawback.

However, a huge plus has to be granted for colour reproduction. Thanks to additional coatings improving colour saturation, the U8Q almost covers the entire DCI-P3 colour space (98%), and for the wider BT.2020 gamut it achieved over 80%. This is an excellent result that makes HDR films look juicy, intense, and just very cinematic.

When it comes to HDR, the TCL C8L turns out to be a hellishly bright television – and I mean that literally. On a synthetic test pattern of 5%, our measuring equipment indicated a result exceeding 4500 nits. That's an almost cosmic result, considering that reference director's monitors, which we often refer to in our materials, usually operate around 4000 nits. Does this mean the C8L breaks barriers and climbs to the technological peak of Mini-LED? Not quite. Dry synthetic tests are one thing, and real film images are another. In real, varied scenes, the C8L hits around 1600 nits at its peak. That's still a very good result, ensuring a very high level of HDR dynamics, but it's clearly lower than what the manufacturer boasts in the specifications. The trouble begins with very small bursts of light – then the brightness can drastically drop to around 600 nits. The algorithm does everything it can to maintain deep blacks and minimise halo effect, but it does so at the cost of HDR impact. This is ideal evidence that laboratory test patterns rarely correlate with what we ultimately see on the screen.

Huge applause is due for colour reproduction, all thanks to the new generation of SQD (Super Quantum Dot) quantum dots. The coverage of the DCI-P3 palette reaches 97%, but the jaw-dropping measurements come from the notoriously demanding BT.2020 space. The C8L achieves an impressive 90% in this area, placing it alongside today’s top screens that feature RGB backlighting. Importantly, unlike some screens with Micro/Mini RGB backlighting, this effect is stable regardless of the scene being displayed. Of course, it’s important to remember that content mastered for such a wide gamut in films or series is still a rarity. However, the very fact that the panel has such a "reserve of colours" deserves huge admiration.

We have to admit that when the U8Q arrived in our editorial office, we were slightly surprised… and in a good way. Usually, white balance in televisions immediately requires adjustment – it can be too warm or too cold, which immediately causes strange colour errors. Meanwhile, here the situation looks really good straight out of the box. Of course, we’re talking about our unit, so there’s no guarantee that every model will be tuned as well, but in our case, the first impressions were very positive. The only more noticeable issue was related to how the television manages brightness. Looking at the EOTF chart, it’s clear that the U8Q tends to brighten small elements on the screen. This, in turn, caused what we mentioned earlier – slight overexposure and the impression that the whole scene is a bit too bright. However, this is not a flaw that negates the picture, rather an effect characteristic of this model.

We tested the TCL C8L in the best factory mode available in the TV's menu for picture fidelity. I’m of course talking about Filmmaker Mode, which was introduced into this brand’s software relatively recently (a year ago in the K series). Thanks to it, the average user can get pretty good colour reproduction straight out of the box, although it’s certainly not perfectly tuned. Looking at the factory white balance of our unit, in both SDR and HDR content, there was a clear lack of the red component, which made the picture noticeably cooler and slightly shifted towards bluish‑green hues. The issue of brightness management is also ambiguous, as we mentioned earlier. While in SDR content the linearity of the gamma parameter is really good and consistently holds the reference value of 2.4, things are much worse in HDR. Tracking the EOTF curve clearly shows the TV’s brightness is considerably boosted across the range, which can make the final image overly bright and inconsistent with the creators’ intent, and that is in a mode that by definition should avoid this. Of course, like every unit in our lab, this one was also subjected to professional calibration, and you can find the results below.

Of course, we wouldn’t be ourselves if we didn’t make adjustments to the white balance. After calibration, we managed to level the SDR signal to near perfection – older films, YouTube content, and classic television looked nearly ideal on the U8Q. It’s truly an impressive level that shows this model can do a lot if given a bit of help. Unfortunately, the situation is different with HDR content. The colours themselves don’t pose much of a problem, but the biggest issue with the U8Q remains the EOTF brightness characteristics. In practice, the television tends to "shoot" above how the image should originally look. It’s this slight "blowout" we noticed earlier in comparisons with the best screens on the market. It’s a bit of a shame that this characteristic can't be completely tamed – if we could maintain equally good brightness control in HDR as we do in SDR, we would be looking at an absolutely reference-level image.

As you can see, the results of a professional calibration of the TCL C8L are genuinely promising, thanks to the extensive adjustment tools the manufacturer made available in the menu. Most importantly, we were able to fully correct the white balance, eliminating a lack of red so the image finally stopped drifting into unwanted, cool tones. After this step, errors in the ColorChecker test fell to near-reference values, regularly sitting below a Delta E threshold of 2, which is under the level noticeable to the human eye.

Since the test patterns look so perfect, you might ask: why then the lower final score in this category? The answer lies in the brightness management discussed earlier. Although the menu includes sliders that let you precisely straighten the EOTF curve on synthetic signals, when confronted with real film material (I recommend turning the EOTF filter on when watching films), it becomes clear that the TV in most scenarios still responds to HDR metadata in its own way. As a result, the image can be a touch too bright and not in line with the creators' intent, and it was precisely for this lack of repeatability with real-world films that we had to dock the C8L a few points.

Hisense U8Q handles lower quality materials quite well. The television can smooth tonal transitions thanks to the “Smooth and Gradient Picture” feature – it works best on the Medium setting. It nicely dims unwanted bands and irregularities in the image, but importantly, it doesn't remove the film grain or fine details.

The upscaling itself is also at a good level. Image from lower resolutions appears smooth and soft, sometimes a bit too much – we get a plastic effect that may not appeal to everyone. Fortunately, this can be easily corrected with the sharpness slider, allowing you to adjust the image to your personal preferences.

This year the C8 series and the higher-end models have probably received the biggest and most eagerly awaited upgrade in TCL's history, and it's to do with digital image processing. The C8L is the entry-level model in the manufacturer's line-up to be fitted with the latest flagship MediaTek Pentonic 800 chipset (shown in the menu as MT9655). It is thanks to its processing power that the feature called "Gradual Smoothing" finally works the way it should. The algorithm effectively removes unwanted posterization (ugly tonal transitions / colour banding) from the picture, doing so intelligently enough that it does not degrade the sharpness of other details.

The processor also handles upscaling lower-resolution content to 4K very well. Although judging this element can be purely academic, because the differences between today's TVs in this class are very subtle. The most important point is that TCL finally has nothing to be ashamed of compared with the competition.

Hisense U8Q has a panel that can refresh the image up to 165 Hz in 4K resolution. In practice, this will mainly benefit PC gamers, but as they say – better to have it than not 😊. For movies and series, we have a built-in smoother called Ultra Motion Smoothing. In the settings, it can be easily adjusted to your own preferences – whether you want a more ‘cinematic’ frame rate or a smooth, theatrical spectacle.

The TCL C8L is equipped with a fast panel with a native 144 Hz refresh rate. That spec will be most appreciated by demanding PC gamers, while most users, relying on consoles or TV broadcasts, will use a steady 120 Hz. And it is at 120 Hz that the motion-processing algorithms take care of image processing for films, series and sports. In the TV's menu you'll find a "Motion Clarity" option that lets you customise the motion smoothing to your preferences. The algorithms handle both cinematic productions at 24 or 30 frames per second and fast-paced sports broadcasts at 50 or 60 frames per second, maintaining the right level of smoothness.

In terms of features, the Hisense U8Q has practically everything one would expect from a modern gaming television. Thanks to the new processor, the manufacturer has managed to implement three HDMI 2.1 ports, so there’s no trouble connecting multiple consoles or a computer. On top of that, it includes all the key technologies – Game Bar with parameter previews, variable refresh rate (VRR), automatic game mode (ALLM)… in a word, a complete set.

But as often happens with Hisense, it’s missing just a bit from perfection. The biggest drawback remains the lack of support for the HGiG format, which allows the TV's brightness to be adjusted to the console and gets the most out of HDR in games. It’s a shame because if this feature were included, we’d have a device practically made for gamers. As it stands, the U8Q remains “only” a very good choice 😉

For gamers – especially for owners of powerful PCs and multiple consoles simultaneously – the TCL C8L is a true beast. This is the first model in this manufacturer's lineup that is equipped with four full HDMI 2.1 ports with a maximum bandwidth of 48 Gbps. This is directly due to the use of the new Pentonic 800 processor, which we've mentioned before. Additionally, the TV seamlessly supports practically every gaming feature. It has an automatic game mode (ALLM) that reduces latency to minimal levels, as well as full variable refresh rate (VRR) operating in an impressive range of up to 288 Hz. It also supports standards such as G-Sync and FreeSync from Nvidia and AMD. When it comes to image display standards, there are no compromises either: the C8L offers complete support for HDR formats in gaming, including gaming Dolby Vision and the HGiG profile. We can conveniently manage all these features from a very readable gamer bar (Game Bar), which we can customise according to our own preferences. From a purely gaming perspective, the C8L really has no flaws – well, maybe apart from the previously mentioned slight ghosting. But other than that? It’s a no-nonsense machine for gamers.