Hisense U8Q vs Sony BRAVIA 7 II

When it comes to HDR, the Hisense U8Q shows its claws. On paper, meaning in synthetic measurement tests, the TV can "push out" nearly 4000 nits of peak brightness. This is a value that most models can only envy. In practice, this translates to very strong light effects in movies – in some scenes we managed to measure real levels from 1500 to 2000 nits, which is a level usually reserved for the absolute top-tier TVs on the market.

Of course, it's not always so perfect. In small, point-like elements, brightness can drop – a good example is scene number 4 from the movie Sicario 2, where instead of thousands of nits we get about 500. But it's worth noting that the effect doesn't disappear completely – the light is still visible, and the image doesn't appear artificially dimmed. This is a typical issue with Mini LEDs, so it’s hard to consider it a major drawback.

However, a huge plus has to be granted for colour reproduction. Thanks to additional coatings improving colour saturation, the U8Q almost covers the entire DCI-P3 colour space (98%), and for the wider BT.2020 gamut it achieved over 80%. This is an excellent result that makes HDR films look juicy, intense, and just very cinematic.

Sony Bravia 7 II handles HDR very well and, above all, is simply a bright television. In the correct viewing mode for watching, Professional, we measured about 2,000 nits of peak brightness, so the panel’s capabilities are truly large. Of course, in Mini-LED sets a test-pattern result is only part of the story, because much still depends on how the TV controls the backlight in real scenes. Here Sony’s algorithms perform really well. Depending on the scene, the brightness we measured in films ranged from about 1,100 to as much as 1,700 nits. That’s a level at which HDR has proper punch and bright highlights can be genuinely impressive. It’s not perfect in every situation. With small bright elements on a very dark background, the Bravia 7 II clearly prioritises maintaining good black levels, so their brightness can fall to around 500 nits. It still looks good, but it’s clear the TV doesn’t always manage this without compromise.

Colours

The second thing that has a huge impact on HDR is, of course, colour. And this is where True RGB was meant to deliver one of the biggest changes. Looking at the panel’s capabilities alone, the Bravia 7 II performs very well. We measured roughly 98% DCI-P3 coverage and 88% BT.2020, so the potential for showing highly saturated colours is substantial. In RGB TVs the matter is a bit more complex. When we repeated the same measurements with a film-like background applied, gamut coverage dropped to about 92% DCI-P3 and 78% BT.2020. Those are still good numbers, especially for an RGB Mini-LED TV, but they show that the final result largely depends on how the algorithms drive the three backlight colours. In most scenes the Bravia 7 II handles this well and colours retain strong saturation. The biggest differences are visible in blue shades, where samples start to deviate more noticeably from the reference values and coverage is weaker than for the other primaries. True RGB therefore offers genuinely greater potential, but, as with brightness, a lot depends on what’s actually happening on screen.

We have to admit that when the U8Q arrived in our editorial office, we were slightly surprised… and in a good way. Usually, white balance in televisions immediately requires adjustment – it can be too warm or too cold, which immediately causes strange colour errors. Meanwhile, here the situation looks really good straight out of the box. Of course, we’re talking about our unit, so there’s no guarantee that every model will be tuned as well, but in our case, the first impressions were very positive. The only more noticeable issue was related to how the television manages brightness. Looking at the EOTF chart, it’s clear that the U8Q tends to brighten small elements on the screen. This, in turn, caused what we mentioned earlier – slight overexposure and the impression that the whole scene is a bit too bright. However, this is not a flaw that negates the picture, rather an effect characteristic of this model.

To evaluate the factory colours we chose the Professional mode, because it performs best among the available presets. It's not perfect. In SDR the white balance is slightly biased toward magenta, so some scenes look a little warmer and less neutral than they should. A bigger issue is the gamma, which sits closer to 2.5 than 2.4. As a result the image is a bit too dark in places, especially in the mid-tones. In HDR the situation is better. As brightness increases there's a little too much red, but it isn't something that really jumps out while watching. Overall the Professional mode is a good starting point, though you can get a bit more out of it with calibration.

Of course, we wouldn’t be ourselves if we didn’t make adjustments to the white balance. After calibration, we managed to level the SDR signal to near perfection – older films, YouTube content, and classic television looked nearly ideal on the U8Q. It’s truly an impressive level that shows this model can do a lot if given a bit of help. Unfortunately, the situation is different with HDR content. The colours themselves don’t pose much of a problem, but the biggest issue with the U8Q remains the EOTF brightness characteristics. In practice, the television tends to "shoot" above how the image should originally look. It’s this slight "blowout" we noticed earlier in comparisons with the best screens on the market. It’s a bit of a shame that this characteristic can't be completely tamed – if we could maintain equally good brightness control in HDR as we do in SDR, we would be looking at an absolutely reference-level image.

After calibration the Bravia 7 II can look significantly better. First and foremost, we managed to set the white balance very well in both SDR and HDR. Gamma can also be improved, and after correction it runs very close to the reference value. For most users those changes will have the biggest impact on the picture. There is, however, a limitation with the colours themselves. On the Bravia 7 II Sony does not provide access to a traditional CMS that would let us adjust individual hues separately. Much is left to the algorithms controlling the True RGB backlight. If the TV reproduces a specific colour inaccurately, we are not always able to do anything about it. In our measurements this is most apparent in parts of the reds and blues, where errors can still be quite large. That does not, however, undermine the value of calibration. Correctly setting the white point and gamma strongly affects the whole picture, so even without the ability to precisely correct every colour the difference from the factory settings is noticeable.

Hisense U8Q handles lower quality materials quite well. The television can smooth tonal transitions thanks to the “Smooth and Gradient Picture” feature – it works best on the Medium setting. It nicely dims unwanted bands and irregularities in the image, but importantly, it doesn't remove the film grain or fine details.

The upscaling itself is also at a good level. Image from lower resolutions appears smooth and soft, sometimes a bit too much – we get a plastic effect that may not appeal to everyone. Fortunately, this can be easily corrected with the sharpness slider, allowing you to adjust the image to your personal preferences.

Scaling and digital processing are among the strongest points of the Bravia 7 II and one of Sony's biggest advantages over the competition. Sony has for years excelled at digital image processing, and it's clear here too. Above all, the 'Smooth Gradation' function works very well, smoothing weaker tonal transitions in poorer-quality content. The safest setting is low, but we'd comfortably recommend medium as well. The effect is stronger, and the TV still handles fine detail very delicately. Some minor details may be slightly smoothed, but Sony does it much more subtly than many other brands. Upscaling is also very good. Lower-resolution content is nicely upscaled to 4K; the image looks clean and retains a lot of detail. Of course the TV won't magically turn native HD into true 4K, but the Bravia 7 II does very well with what can be pulled from such a source.

Hisense U8Q has a panel that can refresh the image up to 165 Hz in 4K resolution. In practice, this will mainly benefit PC gamers, but as they say – better to have it than not 😊. For movies and series, we have a built-in smoother called Ultra Motion Smoothing. In the settings, it can be easily adjusted to your own preferences – whether you want a more ‘cinematic’ frame rate or a smooth, theatrical spectacle.

The Bravia 7 II uses a 120 Hz panel, so in terms of motion handling it delivers everything you'd expect from a TV of this class. With sport or games at 120 fps the picture is suitably smooth, and for films Sony provides an advanced motion interpolation system. You can therefore adjust the level of interpolation separately and choose whether to retain a more cinematic motion or achieve noticeably greater smoothness. Motion blur itself is a bit worse. The VA panel used isn't among the fastest, and moving objects can show a slight trailing, especially against darker backgrounds. It's not at a level that will seriously disturb normal viewing, but last year's Bravia 7 was better in this regard and had a noticeably faster panel.

In terms of features, the Hisense U8Q has practically everything one would expect from a modern gaming television. Thanks to the new processor, the manufacturer has managed to implement three HDMI 2.1 ports, so there’s no trouble connecting multiple consoles or a computer. On top of that, it includes all the key technologies – Game Bar with parameter previews, variable refresh rate (VRR), automatic game mode (ALLM)… in a word, a complete set.

But as often happens with Hisense, it’s missing just a bit from perfection. The biggest drawback remains the lack of support for the HGiG format, which allows the TV's brightness to be adjusted to the console and gets the most out of HDR in games. It’s a shame because if this feature were included, we’d have a device practically made for gamers. As it stands, the U8Q remains “only” a very good choice 😉

Bravia 7 II has pretty much everything you'd want from a good console TV today. It supports 4K at 120 Hz, VRR from 48 to 120 Hz and ALLM, so when you start a game the TV automatically switches to low-latency mode. HGiG works correctly, so once you configure HDR on the console the TV won't try to brighten the image on its own. Just remember to turn off tone mapping in the TV's menu. Another plus is Dolby Vision in game mode, which will be especially useful for Xbox owners. Sony also includes its own Game Menu, where you can quickly view key signal info, check VRR or change gaming settings without digging through the full TV menu. The only thing missing from the feature list is support for 1440p at 120 Hz. Our biggest complaint is not really about the features but the connectors. The Bravia 7 II has four HDMI ports, but only two of them support full HDMI 2.1 with 48 Gbps bandwidth. One of those is also the eARC port. So if you connect a soundbar or AV receiver via HDMI, in practice you only have one full HDMI 2.1 left for a console or PC. With a single console that's fine, but with a PS5, an Xbox and an audio setup it starts to feel cramped. That's hard to justify from Sony. In cheaper TVs two HDMI 2.1 ports can still be accepted, but in a model of this class, especially in 2026, we'd expect all four ports to be HDMI 2.1.