Hisense U8NQ vs SONY BRAVIA 3 II (XR35M2)

Hisense U8NQ demonstrates its capabilities in HDR, achieving a luminance score on the chart exceeding 2000 nits. In the first, third, and fifth scenes where the screen is covered in light, the television showcased very high brightness, which is impressive and allows you to enjoy the full effect of HDR. Unfortunately, in the second and fourth scenes, such as those from the film "Sicario 2," the television encounters issues maintaining brightness, resulting in disappointing scores around 250 nits. Although the large number of dimming zones should theoretically help, the algorithm responsible for their control does not always work perfectly—bright, small elements like the moon or helicopter lights are too dimmed, which takes away from the typical HDR effect. Instead of blinding brilliance, we receive a more subdued light that does not convey the full potential of HDR. Nevertheless, the television deserves commendation for its very good coverage of the DCI-P3 colour gamut at 97%. This makes colours vibrant, and most movie scenes look really good, significantly enhancing the viewing quality.

The Bravia 3 II isn't exactly a TV that tries to impress with brightness. In our measurements it reached around 450 nits, so it's well short of the brightest models on the market. That doesn't mean HDR is just a paper feature here. Compared with standard SDR material, the brightest parts of the image can already punch through noticeably, and highlights, light sources and stronger exposures have a bit more energy and stand out better from the rest of the scene. You can see this best in simpler shots where the screen contains lots of bright elements. Then the Bravia 3 II can give a taste of a higher-dynamic-range picture. The problem only starts with more demanding content, where much greater brightness headroom is needed. There the TV quickly shows its limits and instead of bold, spectacular HDR we’re left with a merely competent picture.

Colours

The Bravia 3 II uses a QLED panel, although technically it doesn't employ a traditional quantum-dot layer. Instead Sony has used a PFS phosphor-based solution, which performs a very similar role: it allows for more saturated reds and greens, and thus reproduces a much wider colour gamut. In our measurements coverage of the DCI-P3 gamut was about 94%, and of the very wide BT.2020 around 74.4%. Those are good results for this class of hardware, which means the Bravia 3 II has no problem showing suitably saturated colours in HDR material. Colours don't look washed out, and the more intense hues can look really attractive.

The Filmmaker mode on the Hisense U8NQ television can be described as the most accurate mode present in this model. Despite its accuracy, it has significant errors in reproducing the reference image, which we will describe now. In the case of HD content, the white balance shows a distinct dominance of red, causing the image to appear overly pinkish and warm. In the comparison photo below, you can see how this effect impacts the presentation of content. The brightness characteristic also leaves much to be desired—a too low gamma causes the screen to be excessively brightened, and blacks appear washed out, making the overall image seem cooler than it should be.

For 4K HDR content, the problem is the opposite—the white balance shows too much dominance of blue, making the image take on an artificial quality and seem unnaturally sharp. All these deviations for both HD and 4K HDR content can be confirmed using the Colour Checker test, which clearly shows how the colours deviate from the correct patterns.

In Professional mode the Bravia 3 II delivers a fairly good level of colour reproduction straight out of the box. In SDR the most noticeable issue is a slightly low gamma, which makes the midtones a little brighter. The white balance isn't perfect either; as brightness increases a bit of blue and red drops away, so whites can sometimes appear a touch warmer with a faint greenish tint. These aren't mistakes that immediately jump out when watching a film. Average error values hover around 3, so the factory setup can be considered quite good. The situation in HDR is similar. Here too there's a slight lack of blue, so the picture is marginally warmer than the reference, but the difference isn't large enough to be distracting during normal viewing.

The white balance for both 4K and HD content has been heavily adjusted, significantly improving the image quality. While some errors are still visible, they are not large enough to greatly affect the perception of the image. A notable improvement can also be seen in the gamma brightness characteristic — the image is no longer excessively bright, resulting in more natural blacks and better contrast.

However, like with many other Hisense models, there are noticeable issues with the EOTF curve, which is responsible for managing brightness in high-quality materials. Although it may seem correct at first glance, when the filter is applied to the "EOTF in films" chart, it is evident that the TV is somewhat "playing around" with 4K content. It is clear that the EOTF curve is significantly below the reference level, leading to an overall dimming of the image compared to the reference. We noticed this effect in previously tested scenes from the films "Pan" and "Billy Lynn." While it is not a serious issue, it is worth paying attention to. It could be significant for those seeking a display with the most faithful image reproduction. Despite this error, the image will be more enjoyable for most. Colours are represented better, and the overall image quality is significantly improved.

After calibration you can get a lot out of SDR material. The white balance was set almost perfectly, gamma practically matches the reference value, and average colour errors fell from around 3 to about 1. That’s already the level at which differences from the reference image are very hard to spot in practice. The Bravia 3 II therefore shows that despite its place in Sony’s range it has quite a bit of potential for precise picture tuning. Improvement is also visible in HDR, although here you can’t avoid all the limitations of the TV itself. Once the colours are evened out it’s easier to notice that the EOTF curve in film material runs slightly below the reference value in places, meaning the Bravia 3 II gently darkens parts of the image. That isn’t ideal from a reference point of view, but in this particular TV it also has an advantage. With no local dimming and average black levels this behaviour slightly reduces the visibility of the backlight in darker scenes and helps preserve a stronger sense of contrast. You could say Sony is partly masking the limitations of the panel this way, rather than trying at all costs to stick to the reference brightness.

In the context of smoothing tonal transitions, the Hisense U8NQ unfortunately struggles. The "Smooth and Gradient Picture" feature does not yield noticeable effects — there is no improvement in any setting, which is disappointing, especially in demanding scenes with a lot of subtle tonal transitions.

As for the digital processing, or so-called upscaling, the scene with the model is rendered correctly — her outline is clear, without significant cropping. Similarly, thin lines, like tree branches, have slight jaggedness, but the overall image looks plastically and softly, providing a good impression. Unfortunately, there is also an issue with so-called overscan, which results in cropping of the image at the edges. This can be annoying when watching content such as news, where the bottom information bars may be partially invisible.

Bravia 3 II is Sony's first TV to use the new MediaTek Pentonic 800 chip, and you can see a few changes in the image processing. Starting with the basics: the upscaling itself is decent. The TV can sensibly upscale lower-resolution material and doesn't have a strong tendency to over‑emphasise jagged edges or other source imperfections. With regular broadcast TV or lower-quality streaming material the picture therefore remains quite attractive.

We have more reservations about the digital image processing. In this model Sony has replaced the well-known "Smooth Gradation" function with a new setting called "Digital Noise Reduction". Its job is basically the same: to smooth out ugly tonal transitions and artifacts caused by heavy compression. Unfortunately, this function performs noticeably worse than before. At the "Large" setting (the only one that had any visible effect) the TV can smooth away too many image elements at once, which causes film grain to disappear and object textures or even skin to start looking unnatural. Worse still, the effect is not particularly stable. When there's more motion in a scene, the function's effect noticeably weakens and at times it looks as if the TV stops intervening in the image altogether. So for everyday viewing we wouldn't recommend using it at a high level. It can help on static shots, but the trade-off is often too much loss of detail.

Hisense U8NQ is equipped with a 144 Hz panel, making it an excellent choice for both sports and gaming. The TV will also satisfy movie fans, as it features a built-in "Ultra Motion Smoothness" enhancer that allows users to control the smoothness of the image — you can choose whether you prefer a more "framey" picture or a smoother, cinematic effect. This provides great flexibility in adjusting the motion quality to individual viewer preferences.

Motion handling is definitely one of the Bravia 3 II's strongest points. The TV uses a 120 Hz VA panel, a solution that by nature, despite the high refresh rate, doesn't always cope well with motion blur. Sony has, however, managed that issue very well here. Fast-moving objects remain sharp, and the characteristic motion trails and blur are reduced to a very low level, if not to zero. It's one of the least motion-blur-prone LCD TVs we've had the chance to test. Interestingly, in this respect the Bravia 3 II can even outperform the much more expensive flagship True RGB series, the Bravia 9 II.

Hisense U8NQ offers everything a player might need for comfortable gameplay. The television supports a refresh rate of 144 Hz, ensuring an incredibly smooth image, especially in dynamic action games. The VRR (variable refresh rate) feature allows the image to adjust to variable frames per second, eliminating stuttering and tearing, translating to exceptionally smooth gaming. Additionally, the television is equipped with the ALLM (auto low latency mode) feature, which automatically switches the TV to game mode, minimising input lag. This means players can enjoy responsive gameplay without needing to manually adjust settings.

Hisense U8NQ also supports Dolby Vision, which is important for gamers who value high image quality, high contrast, and deep colours in games that support this format. The television also features a "Game Bar" — a function that allows quick access to essential settings during gameplay, significantly enhancing user convenience.

However, it is worth noting that despite its rich set of features, the Hisense U8NQ does not offer support for the HGiG standard, which is a popular HDR format in gaming. This may be disappointing for players expecting optimal detail reproduction in HDR scenes. Nonetheless, the other features of the television make the Hisense U8NQ a solid choice for console gaming enthusiasts, offering fluidity, high contrast, and user convenience.

The Sony Bravia 3 II is a very good TV for gamers, although not everything has been solved the way we’d like. The biggest change concerns the connectors. For the first time in a Sony TV we get four full HDMI 2.1 ports with 48 Gb/s bandwidth, thanks to the new MediaTek Pentonic 800 chipset. That removes one of the problems that has hung over this manufacturer’s TVs for years. You can connect several devices at once and on each input use the device’s full capabilities, including VRR and ALLM. There’s also a simple Game Bar that lets you check the key signal parameters and change a few useful settings, such as black level, when you want to improve visibility in darker parts of a game.

There are, however, two limitations worth knowing. The first is the lack of support for 1440p at 120 Hz. That won’t be an issue for everyone, but people using that resolution on a console or PC—for example to get higher frame rates in certain games—will have to choose 1080p. We have more reservations about HGiG support. Sony doesn’t let you disable tone mapping on the Bravia 3 II, so the TV keeps processing HDR even when you’d prefer to leave that task to the console. It’s easiest to spot during HDR setup—the checkerboard test pattern doesn’t disappear at the point where it should based on the TV’s actual capabilities. That doesn’t mean HDR in games will look bad. You just need to set up a little differently and, rather than relying on the pattern, manually set the peak brightness to about 450 nits. So the issue can be worked around, but you should know about it before you start configuring your console.