Hisense S7NQ CanvasTV vs Samsung Q6F (IPS)

When it comes to the brightness of the television and how it handles bright elements while watching films, it's just average – similar to the contrast. The average brightness level of the Hisense S7NQ is around 500 nits. This is a value that allows you to feel the hints of true HDR, but it's definitely not enough to speak of remarkable effects. However, the television should be praised for its colour gamut coverage – films look very colourful and vibrant. Thanks to the use of a PFS LED (QLED) coating, the device is able to cover more than 90% of the DCI-P3 colour gamut and over 72% of the wider BT.2020 palette. For a television of this class – these are really very good results.

Unfortunately, the Samsung Q6F is a very dark model. Its peak brightness in HDR does not exceed 250 nits, which is definitely too low to even talk about any "high dynamic range" or HDR effect. In practice, it's better to stick to content in SDR format, which simply looks more predictable on this TV. Another issue is the global dimming technique – in scenes with a lot of black, the TV drastically dims the entire screen to artificially improve the black levels. This results in the image becoming even darker, with brightness sometimes dropping below 100 nits. The only consolation is the QLED technology, but even here it's average. The applied quantum dot layer is not of the highest quality, as the coverage of the DCI-P3 colour gamut does not exceed 90%. Because of this, colours in HDR content may simply appear unsaturated.

Let's check how the Hisense S7NQ CanvasTV performs in terms of colour reproduction in its best factory mode, which is Filmmaker. Right from the start, it’s clear that it’s definitely better than in dynamic or standard mode, but there are still a few things to nitpick. In terms of image quality from HD signals, the colours are slightly skewed – there’s a dominance of cooler blue tones and a lack of red. This makes the image seem a bit too cool.

A similar effect is noticeable in 4K content, but it’s more pronounced there. The excessive exposure of blue tones and lack of red makes the image appear distinctly cold. However, the biggest issue with this TV isn’t the colours themselves but the way brightness is managed. The unit we tested slightly increased brightness compared to the reference value. The result of this is indeed better visibility of details, but at the cost of significantly lighter blacks – which makes the entire image seem more "flat."

A similar phenomenon was observed in the 4K signal – the slightly inflated curve at the beginning of the EOTF graph indicates that the TV has a tendency to overexpose certain scenes. Fortunately, this effect can be improved through professional calibration, which we will discuss in the next point.

We tested the television in Filmmaker mode, which showed us two completely different sides of this model. Looking at SDR content, we were honestly shocked at how good this television looks straight out of the box. It was really hard to pick on anything here. Despite a slight 'messiness' in white balance and some slightly brightened details in the blacks (which directly stems from the IPS panel construction), colour errors hovered around the '2' level. This is not only a surprisingly good result but rather phenomenal, considering the price of the device.

On the other hand, what the Q6F showed in terms of colours when switched to HDR mode was a very unpleasant surprise. The errors in colour reproduction and palette were so massive that our charts literally ran out of scale. Of course, since Samsung even in such a budget model offers very extensive calibration options, we decided to approach the issue professionally and see what could be done during calibration.

The results we achieved after calibrating the Hisense S7NQ are really very good. Thanks to the calibration, we managed to eliminate excessive blue tone exposure and deficiencies in red with HD signals. A similar, albeit slightly weaker effect was also achieved with 4K HDR content. Brightness management in HD materials has also improved – the television no longer struggles with brightening the image "overall".

However, there are things that cannot be circumvented. The character of the EOTF curve has hardly changed, and the lack of local dimming means that the smallest elements on the screen will always be slightly overexposed. You just have to come to terms with this when choosing a television with a similar type of backlighting. Nevertheless, the final effect is very good and should fully satisfy the vast majority of users.

After our calibration, the colours in SDR mode looked even better – the result is truly surprising, as colour errors at a level of "1" are something typically seen in devices costing several thousand dollars. In this respect, the Q6F is really a great screen for everyday television, less demanding series, or movies. Unfortunately, our intervention in HDR mode did not yield a noticeable improvement. The television, due to its weak blacks and low coverage of a wide colour gamut, still has significant issues with proper colour saturation, especially reds. This is an example of a device where HDR primarily exists as a label on the box – for everyday use, we definitely recommend watching content in SDR format.

Equally important is how the television handles tonal transitions with a poorer signal – for example, in older films, on television, or on YouTube. Unfortunately, despite the presence of the “Smooth and Gradient Picture” feature, which was supposedly meant to improve this aspect, its functionality is really poor. It’s barely noticeable that it has any real impact on the visibility of colour transitions.

The image scaling is also disappointing. Yes, you can see that the television is trying to “pull up” the quality, but the end result is far from ideal. The image often appears slightly jagged, which is particularly noticeable in the example of tree branches in the background. Additionally, the Hisense S7NQ has a clear tendency to crop the image at lower resolutions, which could result in missing subtitles in the news or finer details in the image.

Q6F handles upscaling lower resolution content to native 4K very well. The scaling is surprisingly good, even for such an inexpensive QLED model. The only downside is when watching very low-resolution materials like 576p (typical for old DVD players) – the image may appear slightly cropped. This is because the TV does not allow the option to turn off the Overscan feature, which is a common issue with Samsung devices.

The situation is completely different when it comes to digital processing, or the attempt to smooth the image of unwanted artifacts. Here, the TV completely fails. Although in the menu we find a feature called "Noise Reduction," it does not produce any noticeable results regardless of the slider setting. The only thing it seems to do is introduce undesirable errors into the image. Despite its presence in the system, we definitely do not recommend using it.

When it comes to motion fluidity, the television performs really well. Although the S7NQ was primarily designed for displaying static elements – such as images – the manufacturer has used a panel with a refresh rate of 144 Hz. As a result, sports or games look really good on it.

For content that is not recorded at a high frame rate, the manufacturer has provided two features that allow you to adjust the picture to your own preferences. “Motion blur reduction” and “blur” operate on a 10-point scale, enabling a choice between a more cinematic image – with characteristic frame jumps – and a smooth effect reminiscent of a “soap opera.” How to set this up? That’s a personal choice – we leave the decision to you.

The 60 Hz panel in the Samsung Q6F is standard in this price range, making it a rather average model for dynamic sports or gaming. However, when it comes to movies, the TV performs quite well thanks to its smoothing feature. The "Motion Vibration Reduction" option allows you to adjust the motion smoothness to your own preferences – from preserving a cinematic feel to full smoothness.

Even though the S7NQ is an "image" type television, you can actually play games on it. Really. It has practically everything (except for HGiG mode) that a modern gaming television needs. The 144 Hz panel and two full HDMI 2.1 ports allow for seamless connection of two consoles, such as the PlayStation 5 or Xbox Series X/S.

The television supports Automatic Low Latency Mode (ALLM) and Variable Refresh Rate (VRR) without any stutters or issues. It also handles high frame rates at lower resolutions without any trouble. A shoutout to Hisense for the very attractive Game Bar – it displays all available image options, and additionally, we have the ability to enlarge the minimap or turn on the crosshair (because sometimes someone might actually want to "aim" 😉).

The only missing element – as we mentioned earlier – is the lack of proper implementation of HGiG mode. This is the feature responsible for automatically setting the image in games as the developers intended. It’s a shame because it's the only thing that separates the Hisense S7NQ from being a full-fledged gaming "monster".

We won’t beat around the bush – the Q6F is not a television designed with gamers in mind. While it does include features like ALLM (Auto Low Latency Mode) and VRR frame syncing for consoles, that's pretty much where the list of advantages ends. Beyond these basics, the television offers nothing more that could satisfy those who spend a lot of time in front of a console. It's a real shame that a useful tool like Game Bar, which allows for quick control of game parameters in higher-end Samsung models, is missing here. In terms of gaming, this is an absolutely basic model and it will only suit 'casual' gamers.