Hisense A6Q vs Sony BRAVIA 2 II (S25M2)

Unfortunately, the Hisense A6Q is hard to recommend for watching HDR content. The main issue remains the low brightness and quite modest coverage of a wide colour gamut. A measured brightness of about 300 nits simply isn't enough for HDR materials to look impressive. In practice, the image often resembles standard SDR rather than true HDR with clear differences in brightness and dynamics. Additionally, colours in such content do not appear as they should. The TV does not utilise additional filters like QLED or PFS LED, and a DCI-P3 coverage of around 80% makes some colours look just too pale. As a result, some scenes in HDR materials lose intensity and spectacle, making it hard to talk about a proper HDR experience.

Sony Bravia 2 II isn't a particularly bright TV and unfortunately that's immediately obvious in HDR. In our measurements brightness stayed around 300 to 330 nits, which is far too low for the brightest parts of the image to look truly impactful. In practice HDR here doesn't differ that much from regular SDR. Bright highlights, the sun or lamps are of course visible, but they lack the intensity you'd expect from HDR content. The Bravia 2 II is therefore much better suited to standard SDR material, where its limited brightness will be least noticeable.

Colour gamut coverage

The Sony Bravia 2 II also doesn't impress when it comes to colour. The TV doesn't use any extra gamut-expanding filter, such as the quantum dots found in QLED sets or a PFS phosphor layer. In our measurements it covered about 78% of the DCI-P3 gamut and roughly 57% of the very wide BT.2020. That's definitely too little to deliver truly saturated colours in HDR material. More intense reds, greens or turquoises will simply be less striking than on TVs with an expanded colour gamut. The Bravia 2 II is much better matched to the standard Rec.709 gamut used for films, series and SDR broadcast.

We conducted the tests in the best available mode, which is Filmmaker, however – as is often the case – this does not mean the image is perfect straight out of the box. In the case of Hisense A6Q, this mode clearly “swallowed” too much blue in everyday SDR content. In practice, this led to an image with yellowed whites, particularly noticeable on large, bright surfaces. This does not result from poor assumptions of the Filmmaker mode itself or from the vision of filmmakers, but from factory settings that require adjustment.
Additionally, looking at the saturation characteristics and gamma curve in SDR, as well as EOTF in HDR content, there is a slight tendency to brighten most scenes. As a result, the image often appears brighter than it should, losing a bit of its naturalness. For this reason, we decided to perform a professional calibration to restore the proper colour balance and a more accurate brightness characteristic.

The out-of-the-box colour reproduction in Kino mode was really quite good, at least for ordinary SDR material. The Bravia 2 II had a slight tendency to boost reds, which made some colours lean a bit warmer, at times with a faint pinkish tint. That wasn't a major fault and during normal viewing the picture still looked fairly natural. There was a bit more going on with image brightness. Looking at the gamma curve, Sony doesn't stick perfectly to the reference value. The darkest areas are slightly lifted, while as brightness increases the gamma gradually rises and a large part of the image becomes darker than it should. However, the difference isn't big enough to seriously bother during everyday watching. Overall, SDR straight out of the box performs quite decently.

The situation is much worse in HDR. We've already mentioned the limited colour gamut, but on top of that the Bravia 2 II quite aggressively manipulates image brightness. The EOTF curve sits below the reference for much of the range, which means the TV renders most mid and brighter parts of the scene darker than the source material intends. Only towards the very end of the range does the curve flatten out, as the panel reaches the limits of its capabilities. Combined with a peak brightness of around 300 nits, this gives HDR that not only lacks much punch but can simply look too dark.

Colours after calibration on the Hisense A6Q need to be evaluated in two ways, as everything depends on the type of content. In the case of SDR materials, the effect is really quite good. In daily programs, series, and movies, it’s hard to find any serious issues with colours. The yellow tint has been effectively removed, and the television has also stopped washing out the entire image. As a result, the ColorChecker test showed errors below a Delta 2 value, which are already outstanding results, allowing for a discussion of very high picture quality in standard content. Unfortunately, the situation looks much worse for HDR materials. Yes, the white balance has been corrected and the EOTF curve has been improved, but the limitations of the panel itself remain insurmountable. The lack of support for a wide colour gamut means that the television still generates quite significant colour errors. Parts of the colours simply cannot be displayed by the screen, making them look less saturated than they should. It’s a pity because even a simple PFS or QLED filter would have resulted in a significantly better end effect. The conclusion is therefore simple – for SDR content, the A6Q after calibration works really very well, while viewing HDR content on it should still be approached with caution.

Calibration did a lot for the Bravia 2 II, especially with SDR content. Above all, we managed to even out the white balance and tidy up the gamma, which now stays much closer to the reference value. As a result, the image no longer has the earlier pink cast, and the brightness across different areas is much better organised. You can also see it in the colour errors, which after calibration dropped to a very low level (with only minor issues in the most saturated reds).

We also partly managed to rein in the Bravia 2 II in HDR, especially in the way the TV handles image brightness. However, there is one thing no calibration can fix: the panel's capabilities. A narrow colour gamut means the TV physically can't reproduce the most saturated colours recorded in HDR content. On top of that, the low contrast of the IPS panel causes darker scenes to be covered in a grey haze, which robs colours of some of their depth. So we can improve how the Bravia 2 II uses its capabilities, but we can't overcome the panel's inherent limitations.

Upscaling on the Hisense A6Q works really well for a TV in this price range. Lower resolution materials are correctly “upscaled” to higher resolutions, and the image remains clear without any artificial edge sharpening or the typical "over-sharpening" found in cheap models. Unfortunately, the digital processing is significantly poorer. In practice, it’s hard to talk about any advanced artifact smoothing or masking of problematic tonal transitions. In heavily compressed films—especially those from YouTube—the TV struggles with reducing compression blocks and unwanted banding, making the material's imperfections clearly visible. The A6Q scales the image well, but when it comes to digital processing, it leaves the user alone with the source quality.

Upscaling on the Bravia 2 II performs quite well and the TV maintains the standard we've come to expect from Sony. Lower-resolution material is sensibly upscaled to 4K, and the image is slightly smoothed without excessive edge sharpening. It's less successful at dealing with content that shows visible compression artefacts. That's down to the "Digital Noise Reduction" function, which on the "High" setting can smooth some ugly banding. The problem is it does so quite aggressively and, along with the imperfections, removes a lot of fine detail, including natural film grain. What's more, when there's more motion on screen its effectiveness drops considerably and the improvement is minimal. For that reason we generally didn't use this feature for everyday viewing.

The fluidity of motion on the Hisense A6Q is... well, quite average. It's a TV with a native refresh rate of 60 Hz in 4K, which means the movement of objects on the screen doesn't always look perfectly smooth. In dynamic scenes in films or sports, it's evident that this is not the strongest point of this model. The situation looks much better with 1080p content when connecting a console or computer, as the A6Q can then operate at up to 120 Hz. That's a big plus, especially for gamers. However, the sharpness of motion still leaves a lot to be desired, with noticeable ghosting, and the response time of the panel shows that it isn't one of the TV's strong suits.

Bravia 2 II uses a 60 Hz panel and, for what it is, handles motion quite well. However, bear in mind it’s an entry-level panel and its limitations are especially noticeable with sports. The TV can’t interpolate 50/60 fps material to a higher refresh rate, so it can’t further improve the sharpness of fast-moving objects. For films and series there’s a conventional motion-smoothing feature that can reduce the judder typical of 24 fps material.

For such an inexpensive television, the Hisense A6Q really can surprise with what it offers gamers. It operates in 4K only at 60 Hz, but when the game switches to performance mode and drops to 1080p, the panel can work at even 120 Hz. In this price range, that's a big plus, as most titles on consoles don’t deliver a stable 4K at 120 frames. In practice, we are realistically gaming in 1080p, and here the A6Q provides a very enjoyable gaming experience. Additionally, it has a few features that are usually found in more expensive models: ALLM, VRR, and Dolby Vision Gaming for Xbox Series X/S. Everything is gathered in one place, in a simple and convenient Game Bar, so you don't need to dig through the entire menu. For such an affordable piece of equipment, it's really a solid setup for gamers — maybe not for the most demanding, but definitely spot on for occasional gaming.

The Bravia 2 II isn’t a TV that’s particularly suited to gaming, and the feature list makes that clear pretty quickly. You basically only get automatic low-latency ALLM and a simple Game Bar where you can view basic signal info and change a few settings. That’s where the positives end. The TV doesn’t support VRR or 120 Hz (not even at lower resolutions) and on top of that it has problems correctly implementing HDR HGIG. It’s fine for occasional console play and, thanks to low input lag, the controls remain responsive, but if you’re after a TV primarily for gaming the Bravia 2 II is a significantly limited choice.