Hisense A6Q vs IFFALCON U85X

Unfortunately, the Hisense A6Q is hard to recommend for watching HDR content. The main issue remains the low brightness and quite modest coverage of a wide colour gamut. A measured brightness of about 300 nits simply isn't enough for HDR materials to look impressive. In practice, the image often resembles standard SDR rather than true HDR with clear differences in brightness and dynamics. Additionally, colours in such content do not appear as they should. The TV does not utilise additional filters like QLED or PFS LED, and a DCI-P3 coverage of around 80% makes some colours look just too pale. As a result, some scenes in HDR materials lose intensity and spectacle, making it hard to talk about a proper HDR experience.

iFFALCON U85 handles HDR in a rather dual manner – on one hand, it can surprise with a solid peak brightness of around 650 nits, which places it significantly above average in this price segment. This is particularly evident in bright, full-screen scenes. Examples from movies like Life of Pi or the final test sequences from The Meg prove that the television can maintain the power and essence of the HDR effect when the entire panel needs to “ignite,” providing truly satisfying experiences. However, problems arise in high-contrast scenes, where smaller, bright details appear on the screen; the dimming algorithms prioritise black depth so much that they can crush the brightness of small bright points down to just 100 nits, drastically lowering the image dynamics and depriving us of the real “bite” we expect from HDR standards. However, the question of colours remains a sweetener, as thanks to the use of the PFS phosphor filter (marketed as QLED by the manufacturer), they look very good, achieving nearly 94% coverage of the DCI-P3 colour gamut, which allows for a rich and vivid image in most content.

We conducted the tests in the best available mode, which is Filmmaker, however – as is often the case – this does not mean the image is perfect straight out of the box. In the case of Hisense A6Q, this mode clearly “swallowed” too much blue in everyday SDR content. In practice, this led to an image with yellowed whites, particularly noticeable on large, bright surfaces. This does not result from poor assumptions of the Filmmaker mode itself or from the vision of filmmakers, but from factory settings that require adjustment.
Additionally, looking at the saturation characteristics and gamma curve in SDR, as well as EOTF in HDR content, there is a slight tendency to brighten most scenes. As a result, the image often appears brighter than it should, losing a bit of its naturalness. For this reason, we decided to perform a professional calibration to restore the proper colour balance and a more accurate brightness characteristic.

We tested the factory colours in the iFFALCON U85X model in “Film” mode, which is definitely the most accurate among all available settings, although it is still far from perfect. The main issue that catches the eye in both SDR and HDR content is the improper white balance – an excess of blue and red contributes to a slight purple tint in the image, detracting from the naturalness of the film scenes. An even greater challenge is how the television manages its brightness. Analysing the gamma chart for SDR signal, we noticed significant instability: instead of adhering to the standard value of 2.4, the device oscillates around 2.2, then suddenly makes an unnatural jump to around 3.0. In practice, this leads to confusing effects – large, bright surfaces on the screen appear too dark, while smaller elements are unnecessarily brightened. A similar characteristic can be found in the EOTF curve, which makes the image unpredictable and loses its cinematic authenticity.

Colours after calibration on the Hisense A6Q need to be evaluated in two ways, as everything depends on the type of content. In the case of SDR materials, the effect is really quite good. In daily programs, series, and movies, it’s hard to find any serious issues with colours. The yellow tint has been effectively removed, and the television has also stopped washing out the entire image. As a result, the ColorChecker test showed errors below a Delta 2 value, which are already outstanding results, allowing for a discussion of very high picture quality in standard content. Unfortunately, the situation looks much worse for HDR materials. Yes, the white balance has been corrected and the EOTF curve has been improved, but the limitations of the panel itself remain insurmountable. The lack of support for a wide colour gamut means that the television still generates quite significant colour errors. Parts of the colours simply cannot be displayed by the screen, making them look less saturated than they should. It’s a pity because even a simple PFS or QLED filter would have resulted in a significantly better end effect. The conclusion is therefore simple – for SDR content, the A6Q after calibration works really very well, while viewing HDR content on it should still be approached with caution.

After professional calibration of the movie mode, we must admit that the effect is more than satisfactory – the iFFALCON U85X undergoes a true transformation here. Colour errors in SDR content have dropped to a level below 2, making them practically undetectable to the human eye. We managed to set the white balance almost perfectly, and brightness management (gamma) has become almost exemplary. As a result, with standard quality materials, the television simply looks perfect and it's hard to fault it.

In the case of HDR signal, the situation has also improved significantly, although here the nature of the device is a bit more noticeable. Colour errors have been reduced to around 3, which is an outstanding result in this price range. It's worth taking a look at the EOTF chart (available on the right side of the screen in filters: 4K HDR, gamma / EOTF) to see what is not immediately apparent regarding brightness management by the U85. Though the reference line looks decent, in actual film scenes the television still interprets the signal “in its own way” due to very aggressive local dimming zone algorithms. Does that disqualify this model for watching HDR content? Absolutely not. It’s simply a typical issue with nearly every Mini-LED that has to balance high brightness with the attempt to maintain deep blacks. One just needs to be aware of these technical limitations, which are unavoidable in this segment.

Upscaling on the Hisense A6Q works really well for a TV in this price range. Lower resolution materials are correctly “upscaled” to higher resolutions, and the image remains clear without any artificial edge sharpening or the typical "over-sharpening" found in cheap models. Unfortunately, the digital processing is significantly poorer. In practice, it’s hard to talk about any advanced artifact smoothing or masking of problematic tonal transitions. In heavily compressed films—especially those from YouTube—the TV struggles with reducing compression blocks and unwanted banding, making the material's imperfections clearly visible. The A6Q scales the image well, but when it comes to digital processing, it leaves the user alone with the source quality.

When it comes to scaling images to 4K resolution, the iFFALCON U85X performs solidly. The device effectively boosts low-quality signals, making even older materials look clean and clear on the 4K panel. At extremely low resolutions, such as 480p, you can notice slightly jagged edges (especially on thin lines), but let’s be honest – this is a scenario you'll only encounter while watching very old recordings, so in everyday use, it’s not a real issue.

On the other hand, the digital processing aimed at smoothing tonal transitions performs significantly worse. Although the menu features a function called “Gradual Smoothing”, its effectiveness is at least debatable. In practice, it does not effectively eliminate banding (colour stepping) and, worse yet, can cause more harm than good. This filter can be too aggressive where it shouldn’t be, artificially smoothing out details that shouldn’t be touched, such as the natural texture of the face or the fine details of skin texture. Instead of improving quality, this function can give the image an unnatural, “plastic” look, so it’s best to use it with caution or, preferably: leave it turned off.

The fluidity of motion on the Hisense A6Q is... well, quite average. It's a TV with a native refresh rate of 60 Hz in 4K, which means the movement of objects on the screen doesn't always look perfectly smooth. In dynamic scenes in films or sports, it's evident that this is not the strongest point of this model. The situation looks much better with 1080p content when connecting a console or computer, as the A6Q can then operate at up to 120 Hz. That's a big plus, especially for gamers. However, the sharpness of motion still leaves a lot to be desired, with noticeable ghosting, and the response time of the panel shows that it isn't one of the TV's strong suits.

Unlike budget constructions that can resemble a slideshow in dynamic sports scenes, the iFFALCON U85X is a heavyweight player equipped with a panel featuring a native refresh rate of 144Hz. It's worth remembering that in the realm of movies, series, or sports, we'll predominantly operate at 120Hz due to the specifics of image enhancement systems. Such a fast panel is excellent news for gamers and sports fans, as it opens the door to advanced motion settings that simply aren't available in cheaper 60Hz models.

Everything is managed from the menu “Motion Clarity”, where instead of using ready-made, often overly aggressive modes, we strongly recommend a custom configuration based on two sliders. The most important of these, Flicker Reduction, is responsible for fluidity in films – here, it's best to aim for a value around 4, which helps maintain the natural, cinematic character of motion without falling into the artificial “soap opera effect.” Meanwhile, the first slider, Motion Blur Reduction, is key to success in sports broadcasts. In this case, it's worth going all out and setting it to maximum, ensuring that the image remains sharp during fast-paced action on the field, while annoying ghosting is eliminated.

For such an inexpensive television, the Hisense A6Q really can surprise with what it offers gamers. It operates in 4K only at 60 Hz, but when the game switches to performance mode and drops to 1080p, the panel can work at even 120 Hz. In this price range, that's a big plus, as most titles on consoles don’t deliver a stable 4K at 120 frames. In practice, we are realistically gaming in 1080p, and here the A6Q provides a very enjoyable gaming experience. Additionally, it has a few features that are usually found in more expensive models: ALLM, VRR, and Dolby Vision Gaming for Xbox Series X/S. Everything is gathered in one place, in a simple and convenient Game Bar, so you don't need to dig through the entire menu. For such an affordable piece of equipment, it's really a solid setup for gamers — maybe not for the most demanding, but definitely spot on for occasional gaming.

iFFALCON U85X is an outstanding piece of gear for gamers that has pretty much everything you could ask for from a modern screen for console or PC. It features two full-fledged HDMI 2.1 ports with a full bandwidth of 48 Gbps, which opens the door to key technologies such as VRR and ALLM, ensuring smooth gameplay without screen tearing and with minimal lag. The TV effortlessly handles high refresh rates at various resolutions, and a real curiosity is the mode that allows for up to 240Hz when dropping down to Full HD quality. Everything is managed by the Game Bar (which is a faithful copy from TCL), allowing for instant switching of picture modes, personalization of the interface appearance, or even adding a virtual crosshair in the middle of the screen.