Hisense A6Q vs Dreame S100

Unfortunately, the Hisense A6Q is hard to recommend for watching HDR content. The main issue remains the low brightness and quite modest coverage of a wide colour gamut. A measured brightness of about 300 nits simply isn't enough for HDR materials to look impressive. In practice, the image often resembles standard SDR rather than true HDR with clear differences in brightness and dynamics. Additionally, colours in such content do not appear as they should. The TV does not utilise additional filters like QLED or PFS LED, and a DCI-P3 coverage of around 80% makes some colours look just too pale. As a result, some scenes in HDR materials lose intensity and spectacle, making it hard to talk about a proper HDR experience.

The Dreame S100 is a relatively bright television. In movie mode, the brightness we measured reached around 600 nits. This is a really good result, although not the highest considering the competition in this price range. In full-screen scenes, it's clear that the television can generate an image that hits the mark in terms of brightness. Unfortunately, when more complex scenes appeared on the screen, the local dimming algorithm in this model tried above all to maintain the deepest blacks. However, this came at the expense of the HDR effect – and in a drastic way. In such scenes, the brightness of the bright elements fell below 100 nits, which is a downright tragic result, far from any HDR effect. This aspect can be improved, but there are caveats. You just need to change the local dimming setting in the television's menu; however, then the blacks in such scenes simply turn grey. It's a pity that Dreame wasn't able to refine the local dimming algorithms better, and the S100 is another example that the number of local dimming zones doesn't always translate into a better picture. As a consolation, it's worth noting that the Dreame S100 is marketed as a 'QLED' type television, although it actually uses a PFS LED filter. As a result, the colours are appropriately saturated, and our measured DCI-P3 colour gamut coverage exceeded 94%.

We conducted the tests in the best available mode, which is Filmmaker, however – as is often the case – this does not mean the image is perfect straight out of the box. In the case of Hisense A6Q, this mode clearly “swallowed” too much blue in everyday SDR content. In practice, this led to an image with yellowed whites, particularly noticeable on large, bright surfaces. This does not result from poor assumptions of the Filmmaker mode itself or from the vision of filmmakers, but from factory settings that require adjustment.
Additionally, looking at the saturation characteristics and gamma curve in SDR, as well as EOTF in HDR content, there is a slight tendency to brighten most scenes. As a result, the image often appears brighter than it should, losing a bit of its naturalness. For this reason, we decided to perform a professional calibration to restore the proper colour balance and a more accurate brightness characteristic.

We tested the Dreame S100 in "movie" mode and definitely recommend using this setting for watching all kinds of content. Interestingly, in the deeper settings of the TV, we also find a dedicated "Filmmaker" mode, which is now available from almost every manufacturer. However, in the case of the Dreame S100, we do not recommend using it – it blocks all settings related to the picture and does not allow for any configuration in the menu - not even a motion smoother. So how do the factory colours fare in the S100? Not too bad, but not great either. The TV itself had a noticeable blue tint, which is clearly evident in our white balance measurements. As a result, the picture was artificially brightened, and the colours had a slight bluish tint. This is also confirmed by the Color Checker palette, which showed how the colour samples leaned towards blue, generating quite significant colour errors. On the other hand, the picture looked definitely better in HDR mode, where the colour errors were not as prominent, although they were still far from ideal. Here, the white balance was also too heavily skewed towards blue, causing quite significant errors in color reproduction.

Colours after calibration on the Hisense A6Q need to be evaluated in two ways, as everything depends on the type of content. In the case of SDR materials, the effect is really quite good. In daily programs, series, and movies, it’s hard to find any serious issues with colours. The yellow tint has been effectively removed, and the television has also stopped washing out the entire image. As a result, the ColorChecker test showed errors below a Delta 2 value, which are already outstanding results, allowing for a discussion of very high picture quality in standard content. Unfortunately, the situation looks much worse for HDR materials. Yes, the white balance has been corrected and the EOTF curve has been improved, but the limitations of the panel itself remain insurmountable. The lack of support for a wide colour gamut means that the television still generates quite significant colour errors. Parts of the colours simply cannot be displayed by the screen, making them look less saturated than they should. It’s a pity because even a simple PFS or QLED filter would have resulted in a significantly better end effect. The conclusion is therefore simple – for SDR content, the A6Q after calibration works really very well, while viewing HDR content on it should still be approached with caution.

The Dreame S100 has proven to be a device very amenable to professional calibration. In its menu, we found a plethora of advanced options that allowed us to effectively correct factory errors. Thanks to the advanced white balance correction – both in SDR and HDR content – we completely eliminated excess blue components. The image instantly became much more natural and pleasant to view. After fully tuning the colours, the errors in the Color Checker test dropped below a Delta E value of 2-3. For the average viewer, this means that any colour distortions became almost impossible to see with the naked eye. It's really a nice surprise, as often new brands in the TV market have significant problems with the correct implementation and functioning of sliders in the calibration menu. Here, everything worked as it should. The only thing we need to criticise is the way the TV manages its brightness in HDR. Due to the specific nature of the local dimming algorithms, our measured EOTF curve shows anomalies. In places where high highlights should appear, there is a slight bump in the curve above the reference line. In practice, this results in unnatural brightening of certain, the brightest elements in movies or games. Despite this minor flaw, professional calibration brings a huge, very positive change to this model.

Upscaling on the Hisense A6Q works really well for a TV in this price range. Lower resolution materials are correctly “upscaled” to higher resolutions, and the image remains clear without any artificial edge sharpening or the typical "over-sharpening" found in cheap models. Unfortunately, the digital processing is significantly poorer. In practice, it’s hard to talk about any advanced artifact smoothing or masking of problematic tonal transitions. In heavily compressed films—especially those from YouTube—the TV struggles with reducing compression blocks and unwanted banding, making the material's imperfections clearly visible. The A6Q scales the image well, but when it comes to digital processing, it leaves the user alone with the source quality.

For scaling and digital processing in the Dreame S100, the technology used is proudly called Dreamind™ Pro AI by the manufacturer. However, it must be clearly stated that this is not a proprietary processor but rather a marketing term for a chip from MediaTek – specifically, the model MT5889. Unfortunately, we are talking about a rather outdated unit from a time when MediaTek lagged significantly behind the competition in terms of performance. This, unfortunately, has a direct impact on the image, as this chip also handles that. The upscaling in the S100 is fairly average, and the processor has a tendency to artificially over-sharpen edges (fortunately, this can be somewhat tempered with the sharpness slider in the menu). In the options, we also find a feature called "Contour Smoothing," which theoretically is supposed to improve tonal transitions. In practice, it contributes almost no improvement – setting it to any level rarely eliminates visible colour banding, but it can unnecessarily blur elements of the image that should remain sharp.

Another issue is the phenomenon of overscan (cropping the edges of the frame), which is practically visible all the time. Although there is the possibility to set the screen to display the full frame in low-resolution materials, it requires activating the aforementioned Filmmaker mode. And as you may know, this mode completely blocks any changes to other sliders in the picture menu. In our test tables, we noted that the television offers an option to disable overscan, as such a function technically exists in the system – however, in everyday use, while maintaining reasonable picture settings, you will not be able to take advantage of it.

The fluidity of motion on the Hisense A6Q is... well, quite average. It's a TV with a native refresh rate of 60 Hz in 4K, which means the movement of objects on the screen doesn't always look perfectly smooth. In dynamic scenes in films or sports, it's evident that this is not the strongest point of this model. The situation looks much better with 1080p content when connecting a console or computer, as the A6Q can then operate at up to 120 Hz. That's a big plus, especially for gamers. However, the sharpness of motion still leaves a lot to be desired, with noticeable ghosting, and the response time of the panel shows that it isn't one of the TV's strong suits.

When it comes to motion fluidity, the Dreame S100 performs really well. It features a 144 Hz refresh rate panel, although in reality, the vast majority of people using it in a conventional way will still be limited to 120 Hz (as this is what today's hardware allows aside from PCs). Thanks to the high refresh rate, the image in motion remains really sharp, largely due to the well-functioning MEMC motion smoother. In the menu, we find predefined modes that enable the TV to efficiently generate artificial frames, which effectively enhances the fluidity of dynamic sports shots, but also helps eliminate motion judder in film and TV series material recorded at 24 frames.

For such an inexpensive television, the Hisense A6Q really can surprise with what it offers gamers. It operates in 4K only at 60 Hz, but when the game switches to performance mode and drops to 1080p, the panel can work at even 120 Hz. In this price range, that's a big plus, as most titles on consoles don’t deliver a stable 4K at 120 frames. In practice, we are realistically gaming in 1080p, and here the A6Q provides a very enjoyable gaming experience. Additionally, it has a few features that are usually found in more expensive models: ALLM, VRR, and Dolby Vision Gaming for Xbox Series X/S. Everything is gathered in one place, in a simple and convenient Game Bar, so you don't need to dig through the entire menu. For such an affordable piece of equipment, it's really a solid setup for gamers — maybe not for the most demanding, but definitely spot on for occasional gaming.

The Dreame S100 seems almost like the ideal screen for gamers. The television is equipped with 2 HDMI 2.1 ports with a bandwidth of 40 Gbps, allowing features such as automatic game mode (ALLM) or VRR frame synchronization in the range of 48-144 Hz to work seamlessly on consoles. On board, we also find a well-designed gaming panel (Game Bar). It allows you to continuously preview the most important parameters - from the activated picture modes, to the number of frames rendered by the console, right through to the option of adding a crosshair in the centre of the screen. All of this looks great on paper; however, the biggest issue with the S100 is its implementation of HDR in games. The television does not have a correctly implemented HGiG format. This means a clueless user may misconfigure the console during the initial setup of the screen. Poor configuration can result in an image that is too dark or overexposed (as a guideline: we suggest setting the brightness in the Xbox console menu to around 600 nits, and in the PS5 to 12 clicks). The Dolby Vision format also proves problematic, as it often did not activate at all on the XBOX – Dreame S100 line. And when it was eventually activated, playing was impossible due to the very high input lag often exceeding 100ms. If the manufacturer manages to improve the HDR gaming experience with an update, the S100 will be truly outstanding hardware for gamers. For now, however, compromises must be accepted.