Haier Q80FUX vs TCL C6KS / C69KS / Q6CS

Alright, let's move on to the topic that really sparks discussions, which is the capabilities of the TV in HDR mode. Let's be clear from the start: the Haier Q80FUX is certainly not a brightness demon. The panel of this set can generate about 350 nits at peak, which in today's reality is an absolute minimum to even talk about the presence of HDR expanded dynamic range. On the plus side, this brightness is at least stable – regardless of the test pattern or film scene we used, measurements consistently hovered around 300-350 nits. These are at best adequate results, definitely far from the dazzling display of capabilities that we know from more expensive models. Fortunately, there is one aspect where the Q80FUX makes up for these shortcomings and does so considerably. We are talking about a QLED TV (or more precisely PFS LED), which means that thanks to the quantum dot filter used on the panel, it can generate truly juicy, vibrant colours. These are not empty promises – covering nearly 95% of the DCI-P3 colour gamut is an impressive result and directly translates into very pleasant, saturated colours for the eye.

And what about HDR? Here the C6KS performs quite well and – as is becoming the theme of this review – just like in the C6K model. The maximum brightness generated by this television is around 600 nits. In bright scenes, this translates to a really solid, cinematic effect and generally, video materials look good here. However, it's important to keep in mind the specifics of the dimming algorithm in this model. When very small, bright points (e.g. stars) appear on a dark background, the television can quite significantly dim them. The goal is simple: to eliminate blooming and maintain the best possible black. It's a reasonable compromise. Most viewers will definitely appreciate deep, “true black” more than additional microscopic details, the display of which could cause the screen to appear greyed out. Such is the nature of local dimming technology in this price range, and one must be aware of this. It’s also worth noting that the TCL C69KS (C6KS) has an additional PFS coating, which is marketed under the QLED technology slogan. Thanks to this, the colours are saturated and vibrant – our measurements showed that the coverage of a wide colour gamut reaches as much as 92%.

Factory settings for movie mode are seldom perfect, but in the case of the Q80FUX, we encountered a noticeable imbalance. In SDR content, the image was definitely too warm, due to an excessive amount of red in the white balance, giving the overall picture a slight sepia tone. Conversely, in HDR materials, the television fell into the other extreme – an excess of blue caused an unnatural, cool effect in perception. However, it wasn't the fickle white balance that was the biggest issue with this TV. The real culprit, responsible for the previously described problems, was hiding deeper. It turned out that the Q80FUX has completely miscalibrated gamma values and, crucial for HDR, a poorly executed EOTF curve. It was these erroneous factory settings that caused the notorious clipping of the brightest parts of the image, imposing that characteristic milky filter over them. Thus, we found the source of the problem. This situation led to general, significant colour inaccuracies that were easy to catch even for an untrained eye. Like every television we tested, we decided to calibrate this model as well, and you can find the results of these adjustments in the next paragraph.

In contrast to the more expensive C6K model, in the tested C6KS we don't find an option in the menu labelled as Filmmaker Mode. Is this a reason to cry? Absolutely not. Our tests showed that in practice, in terms of colour reproduction, the lack of this specific label makes virtually no difference. The best available Film/Cinema mode here offers an almost identical picture profile to the aforementioned Filmmaker in the more expensive model. So we get a very similar image, just under a different name. Therefore, if you were wondering whether paying extra for the C6K would give you better colours – the answer is: no, in both cases the base is the same and requires slight adjustments.

The results of our calibration procedures must, unfortunately, be regarded as twofold. Generally speaking, the picture is undeniably better than before the adjustments; however, the biggest winner of this process has been SDR content. It is precisely here, after correcting the gamma curves and white balance, that we achieved results that can safely be called very good. Once set up, the Q80FUX truly shines in standard dynamic range, displaying only slight errors in the most challenging skin tones. Unfortunately, the weakest link remains HDR content. And here's the paradox: even though we managed to calibrate the white balance to near perfection, the overall colour errors still remain at quite a high level. The reason is that the television still interprets the static HDR10 metadata "in its own way," stubbornly enforcing that unfortunate image clipping effect, which inevitably leads to significant distortions. Although we successfully eliminated the factory excess of blue, due to this electronic interference, the screen can still veer into somewhat too cool tones. That’s just how this television is.

Thanks to the white balance adjustment, the C69KS's tendency to distort colours has been effectively limited, leading to a very good final effect. After calibration, we will no longer see excessive warmth in SDR scenes or overly cool tones in HDR. However, it is worth noting the brightness characteristic. In SDR content, there are hardly any objections – the image looks very good, especially in older films, TV shows, or YouTube materials. Evaluating the television's performance in HDR is much more difficult. Analysis of the EOTF curve suggests correct behaviour, but its practical variant shows certain limitations. The C69KS can overly brighten the smallest elements of the frame, while at other times it can dim the entire scene. Calibration has therefore brought clear benefits in terms of colour, but certain limitations resulting from local dimming and the way it is controlled by the C69KS cannot be avoided, which we also observed in the C6K test.

If there's one area where Haier clearly shows it still has a lot to catch up on compared to the market leaders, it's digital image processing. The upscaling, well... it's just okay. And that's really all that can be said about it. It does what it's supposed to do: ensures that lower resolution signals don't scare you with harsh pixelation on the screen and don't look like a forcibly enlarged postage stamp. However, it's far from the finesse and "intelligent" sharpening that more experienced players in this market have developed over the years. The biggest issue with the Q80FUX software is the almost complete lack of additional "cleaning" and smoothing features for the image. The receiver offers no noise reduction mechanisms or gradient enhancement. This means that with older or highly compressed materials, we simply have to accept that all the imperfections in tonal transitions or colour blending, which we mentioned earlier, will constantly accompany us during viewing.

The C69KS handles upscaling quite well. The tested 576p content looks surprisingly decent – a considerable amount of detail is preserved, and the algorithm adds a subtle ‘rounding’ effect to sharp edges, making the image appear more cohesive. However, it doesn't perform as well when it comes to smoothing tonal transitions. The television practically cannot improve them, leaving the image in a rather raw state. With older materials, this can be simply exhausting, as the lack of additional processing highlights all imperfections.

The issue of motion fluidity and blurring is largely predetermined by the use of a 60Hz panel, which naturally makes it difficult to recommend this receiver to enthusiasts of very dynamic content. Fortunately, in the Q80FUX, we find a few options (although, as will soon become clear, really just one) intended to enhance the experience with older film productions. There is a "De-Judder" slider available, which indeed affects motion fluidity and allows us to adjust it to our preferences: from raw, cinematic frame rates to a more theatrical, smoothed presentation. However, a true surprise awaits us right next to it in the menu. There is also a second slider, supposedly dedicated to removing blur – this is a feature we typically encounter in 120Hz panels, aimed at combating blurring in sports. As we expected, recalling memories from testing the K85F model, here too this slider is merely a façade. Its adjustment contributes absolutely nothing to the picture and simply seems to be an oversight by the product engineers who left a non-functional option in the software for this type of panel.

C69KS offers a simplified motion enhancement panel in movies, allowing users to adjust the intensity of the effect using a slider. This makes it easy to tailor the smoothness to personal preferences. It also deserves credit for the ability to utilise higher refresh rates – even though the panel operates natively in 4K at 60 Hz, by lowering the resolution to 1440p, modes of 120 and 144 Hz can be enabled, on both consoles and PC. This sounds like great news, however, in practice, the image at these settings trails exceptionally badly. The effect is so pronounced that the overall experience simply appears mediocre and loses its appeal in everyday use.

Entering the realm of gaming, the Haier Q80FUX proves to be quite a good companion for the "casual gamer." It is equipped with some highly sought-after features today such as VRR (variable refresh rate) and ALLM (automatic low latency mode). However, the biggest surprise is something else. Even though we don't have a 4K@120Hz panel here, the television can accept and display a 120Hz signal at a lower resolution (Full HD). This is a very useful feature, allowing you to consciously switch the console to a lower resolution mode in exchange for significantly higher fluidity, which is a perfectly acceptable compromise in the gaming world.

We won't particularly complain about the lack of additions like the "Game Bar," as it's just a nice extra. However, the most concerning issues arise when we enter the world of HDR in gaming. Due to the fact that the television continuously adapts the signal "in its own way," setting the brightness on the console according to the HGIG standard is almost impossible to accomplish according to the instructions. Worse still, in Dolby Vision mode for gaming, the input lag increases to around 50 ms, which is a high enough value that essentially makes this mode unusable. Generally speaking, we still wouldn't recommend gaming on this television in HDR mode, so these aren't that serious shortcomings. What’s most pleasing is the presence of 120Hz in Full HD, making the Q80FUX quite a cool television for the occasional gamer.

If we overlook the smudging and lack of native 4K at 120 Hz, the C69KS is impressive in how well it performs for gaming. You get everything you would expect from a gaming TV: Variable Refresh Rate (VRR), Auto Low Latency Mode (ALLM), Dolby Vision Gaming mode, and a consistently functioning HGiG. The TV can also operate at 120 or even 144 Hz at lower resolutions, making gameplay on console or PC smoother. Additionally, there's a clear Game Bar that allows you to quickly check key settings while gaming. As a result — despite a few limitations — the C69KS can be a genuinely successful screen for gamers.