Haier Q80FUX vs Samsung Q6F (IPS)

Alright, let's move on to the topic that really sparks discussions, which is the capabilities of the TV in HDR mode. Let's be clear from the start: the Haier Q80FUX is certainly not a brightness demon. The panel of this set can generate about 350 nits at peak, which in today's reality is an absolute minimum to even talk about the presence of HDR expanded dynamic range. On the plus side, this brightness is at least stable – regardless of the test pattern or film scene we used, measurements consistently hovered around 300-350 nits. These are at best adequate results, definitely far from the dazzling display of capabilities that we know from more expensive models. Fortunately, there is one aspect where the Q80FUX makes up for these shortcomings and does so considerably. We are talking about a QLED TV (or more precisely PFS LED), which means that thanks to the quantum dot filter used on the panel, it can generate truly juicy, vibrant colours. These are not empty promises – covering nearly 95% of the DCI-P3 colour gamut is an impressive result and directly translates into very pleasant, saturated colours for the eye.

Unfortunately, the Samsung Q6F is a very dark model. Its peak brightness in HDR does not exceed 250 nits, which is definitely too low to even talk about any "high dynamic range" or HDR effect. In practice, it's better to stick to content in SDR format, which simply looks more predictable on this TV. Another issue is the global dimming technique – in scenes with a lot of black, the TV drastically dims the entire screen to artificially improve the black levels. This results in the image becoming even darker, with brightness sometimes dropping below 100 nits. The only consolation is the QLED technology, but even here it's average. The applied quantum dot layer is not of the highest quality, as the coverage of the DCI-P3 colour gamut does not exceed 90%. Because of this, colours in HDR content may simply appear unsaturated.

Factory settings for movie mode are seldom perfect, but in the case of the Q80FUX, we encountered a noticeable imbalance. In SDR content, the image was definitely too warm, due to an excessive amount of red in the white balance, giving the overall picture a slight sepia tone. Conversely, in HDR materials, the television fell into the other extreme – an excess of blue caused an unnatural, cool effect in perception. However, it wasn't the fickle white balance that was the biggest issue with this TV. The real culprit, responsible for the previously described problems, was hiding deeper. It turned out that the Q80FUX has completely miscalibrated gamma values and, crucial for HDR, a poorly executed EOTF curve. It was these erroneous factory settings that caused the notorious clipping of the brightest parts of the image, imposing that characteristic milky filter over them. Thus, we found the source of the problem. This situation led to general, significant colour inaccuracies that were easy to catch even for an untrained eye. Like every television we tested, we decided to calibrate this model as well, and you can find the results of these adjustments in the next paragraph.

We tested the television in Filmmaker mode, which showed us two completely different sides of this model. Looking at SDR content, we were honestly shocked at how good this television looks straight out of the box. It was really hard to pick on anything here. Despite a slight 'messiness' in white balance and some slightly brightened details in the blacks (which directly stems from the IPS panel construction), colour errors hovered around the '2' level. This is not only a surprisingly good result but rather phenomenal, considering the price of the device.

On the other hand, what the Q6F showed in terms of colours when switched to HDR mode was a very unpleasant surprise. The errors in colour reproduction and palette were so massive that our charts literally ran out of scale. Of course, since Samsung even in such a budget model offers very extensive calibration options, we decided to approach the issue professionally and see what could be done during calibration.

The results of our calibration procedures must, unfortunately, be regarded as twofold. Generally speaking, the picture is undeniably better than before the adjustments; however, the biggest winner of this process has been SDR content. It is precisely here, after correcting the gamma curves and white balance, that we achieved results that can safely be called very good. Once set up, the Q80FUX truly shines in standard dynamic range, displaying only slight errors in the most challenging skin tones. Unfortunately, the weakest link remains HDR content. And here's the paradox: even though we managed to calibrate the white balance to near perfection, the overall colour errors still remain at quite a high level. The reason is that the television still interprets the static HDR10 metadata "in its own way," stubbornly enforcing that unfortunate image clipping effect, which inevitably leads to significant distortions. Although we successfully eliminated the factory excess of blue, due to this electronic interference, the screen can still veer into somewhat too cool tones. That’s just how this television is.

After our calibration, the colours in SDR mode looked even better – the result is truly surprising, as colour errors at a level of "1" are something typically seen in devices costing several thousand dollars. In this respect, the Q6F is really a great screen for everyday television, less demanding series, or movies. Unfortunately, our intervention in HDR mode did not yield a noticeable improvement. The television, due to its weak blacks and low coverage of a wide colour gamut, still has significant issues with proper colour saturation, especially reds. This is an example of a device where HDR primarily exists as a label on the box – for everyday use, we definitely recommend watching content in SDR format.

If there's one area where Haier clearly shows it still has a lot to catch up on compared to the market leaders, it's digital image processing. The upscaling, well... it's just okay. And that's really all that can be said about it. It does what it's supposed to do: ensures that lower resolution signals don't scare you with harsh pixelation on the screen and don't look like a forcibly enlarged postage stamp. However, it's far from the finesse and "intelligent" sharpening that more experienced players in this market have developed over the years. The biggest issue with the Q80FUX software is the almost complete lack of additional "cleaning" and smoothing features for the image. The receiver offers no noise reduction mechanisms or gradient enhancement. This means that with older or highly compressed materials, we simply have to accept that all the imperfections in tonal transitions or colour blending, which we mentioned earlier, will constantly accompany us during viewing.

Q6F handles upscaling lower resolution content to native 4K very well. The scaling is surprisingly good, even for such an inexpensive QLED model. The only downside is when watching very low-resolution materials like 576p (typical for old DVD players) – the image may appear slightly cropped. This is because the TV does not allow the option to turn off the Overscan feature, which is a common issue with Samsung devices.

The situation is completely different when it comes to digital processing, or the attempt to smooth the image of unwanted artifacts. Here, the TV completely fails. Although in the menu we find a feature called "Noise Reduction," it does not produce any noticeable results regardless of the slider setting. The only thing it seems to do is introduce undesirable errors into the image. Despite its presence in the system, we definitely do not recommend using it.

The issue of motion fluidity and blurring is largely predetermined by the use of a 60Hz panel, which naturally makes it difficult to recommend this receiver to enthusiasts of very dynamic content. Fortunately, in the Q80FUX, we find a few options (although, as will soon become clear, really just one) intended to enhance the experience with older film productions. There is a "De-Judder" slider available, which indeed affects motion fluidity and allows us to adjust it to our preferences: from raw, cinematic frame rates to a more theatrical, smoothed presentation. However, a true surprise awaits us right next to it in the menu. There is also a second slider, supposedly dedicated to removing blur – this is a feature we typically encounter in 120Hz panels, aimed at combating blurring in sports. As we expected, recalling memories from testing the K85F model, here too this slider is merely a façade. Its adjustment contributes absolutely nothing to the picture and simply seems to be an oversight by the product engineers who left a non-functional option in the software for this type of panel.

The 60 Hz panel in the Samsung Q6F is standard in this price range, making it a rather average model for dynamic sports or gaming. However, when it comes to movies, the TV performs quite well thanks to its smoothing feature. The "Motion Vibration Reduction" option allows you to adjust the motion smoothness to your own preferences – from preserving a cinematic feel to full smoothness.

Entering the realm of gaming, the Haier Q80FUX proves to be quite a good companion for the "casual gamer." It is equipped with some highly sought-after features today such as VRR (variable refresh rate) and ALLM (automatic low latency mode). However, the biggest surprise is something else. Even though we don't have a 4K@120Hz panel here, the television can accept and display a 120Hz signal at a lower resolution (Full HD). This is a very useful feature, allowing you to consciously switch the console to a lower resolution mode in exchange for significantly higher fluidity, which is a perfectly acceptable compromise in the gaming world.

We won't particularly complain about the lack of additions like the "Game Bar," as it's just a nice extra. However, the most concerning issues arise when we enter the world of HDR in gaming. Due to the fact that the television continuously adapts the signal "in its own way," setting the brightness on the console according to the HGIG standard is almost impossible to accomplish according to the instructions. Worse still, in Dolby Vision mode for gaming, the input lag increases to around 50 ms, which is a high enough value that essentially makes this mode unusable. Generally speaking, we still wouldn't recommend gaming on this television in HDR mode, so these aren't that serious shortcomings. What’s most pleasing is the presence of 120Hz in Full HD, making the Q80FUX quite a cool television for the occasional gamer.

We won’t beat around the bush – the Q6F is not a television designed with gamers in mind. While it does include features like ALLM (Auto Low Latency Mode) and VRR frame syncing for consoles, that's pretty much where the list of advantages ends. Beyond these basics, the television offers nothing more that could satisfy those who spend a lot of time in front of a console. It's a real shame that a useful tool like Game Bar, which allows for quick control of game parameters in higher-end Samsung models, is missing here. In terms of gaming, this is an absolutely basic model and it will only suit 'casual' gamers.