Haier Q80FUX vs LG NANO81A / NANO80A

Alright, let's move on to the topic that really sparks discussions, which is the capabilities of the TV in HDR mode. Let's be clear from the start: the Haier Q80FUX is certainly not a brightness demon. The panel of this set can generate about 350 nits at peak, which in today's reality is an absolute minimum to even talk about the presence of HDR expanded dynamic range. On the plus side, this brightness is at least stable – regardless of the test pattern or film scene we used, measurements consistently hovered around 300-350 nits. These are at best adequate results, definitely far from the dazzling display of capabilities that we know from more expensive models. Fortunately, there is one aspect where the Q80FUX makes up for these shortcomings and does so considerably. We are talking about a QLED TV (or more precisely PFS LED), which means that thanks to the quantum dot filter used on the panel, it can generate truly juicy, vibrant colours. These are not empty promises – covering nearly 95% of the DCI-P3 colour gamut is an impressive result and directly translates into very pleasant, saturated colours for the eye.

If you're hoping that HDR on the NANO81A will bring tears to your eyes, I have to disappoint you. This TV is just too dark to show what this format is really about. With a brightness of only 250 nits, HDR really only exists on paper here. In practice, during viewing, it's very hard to tell whether we're watching material in high dynamic range or regular SDR – it simply lacks that “punch” of light in the bright parts of the image. But, to balance out the criticism, we do have one light at the end of the tunnel – and quite a distinct one at that. It's about colour gamut coverage. Here, the NanoCell filter shows that it's not just marketing nonsense. Our measurements indicated that the coverage of the DCI-P3 space is around 88%. That's a really solid result, placing this model significantly above typical budget models based on regular white LEDs without any filters. Of course, it still lags a bit behind QLED TVs or advanced panels with PFS filters, but for this price range, the colours are surprisingly saturated and vibrant. It’s just a shame that this low brightness doesn't allow them to fully “spread their wings” with the Nano filter.

Factory settings for movie mode are seldom perfect, but in the case of the Q80FUX, we encountered a noticeable imbalance. In SDR content, the image was definitely too warm, due to an excessive amount of red in the white balance, giving the overall picture a slight sepia tone. Conversely, in HDR materials, the television fell into the other extreme – an excess of blue caused an unnatural, cool effect in perception. However, it wasn't the fickle white balance that was the biggest issue with this TV. The real culprit, responsible for the previously described problems, was hiding deeper. It turned out that the Q80FUX has completely miscalibrated gamma values and, crucial for HDR, a poorly executed EOTF curve. It was these erroneous factory settings that caused the notorious clipping of the brightest parts of the image, imposing that characteristic milky filter over them. Thus, we found the source of the problem. This situation led to general, significant colour inaccuracies that were easy to catch even for an untrained eye. Like every television we tested, we decided to calibrate this model as well, and you can find the results of these adjustments in the next paragraph.

For every film fan, the natural choice in LG televisions is the Filmmaker Mode. It is designed to show the image as the director intended – without unnecessary "enhancements". Unfortunately, in the case of our test unit NANO81A, the factory settings left a bit to be desired. The main issue turned out to be the white balance. Measurements revealed a distinct deficiency of blue, which in practice meant that many scenes had a slightly yellowish, even "yellowed" tint. The white wasn’t perfectly clean, which took away the freshness of the image. Additionally, the brightness management wasn't perfect either – the factory-set gamma was too low. The image often appeared oversaturated, as if it had been pulled too much from the shadows, which detracted from its naturalness and depth. Fortunately, LG, even in this relatively low price range, does not block access to advanced settings. The calibration options for this model are extensive, which is a significant plus for those who enjoy "fiddling" in the menu. We decided to approach the matter our way and see how much we could squeeze out of this panel with professional calibration.

The results of our calibration procedures must, unfortunately, be regarded as twofold. Generally speaking, the picture is undeniably better than before the adjustments; however, the biggest winner of this process has been SDR content. It is precisely here, after correcting the gamma curves and white balance, that we achieved results that can safely be called very good. Once set up, the Q80FUX truly shines in standard dynamic range, displaying only slight errors in the most challenging skin tones. Unfortunately, the weakest link remains HDR content. And here's the paradox: even though we managed to calibrate the white balance to near perfection, the overall colour errors still remain at quite a high level. The reason is that the television still interprets the static HDR10 metadata "in its own way," stubbornly enforcing that unfortunate image clipping effect, which inevitably leads to significant distortions. Although we successfully eliminated the factory excess of blue, due to this electronic interference, the screen can still veer into somewhat too cool tones. That’s just how this television is.

After calibration, the NANO81A is a completely different television. What LG offers in terms of image enhancement tools, even in such an affordable model, deserves major credit. We were able to completely eliminate that annoying yellowing of whites and make the colours natural, vibrant, and simply "real". In SDR content (i.e., regular television, YouTube, or older films), the picture now looks miles better – it’s clean, well-balanced, and no longer strains the eyes with strange hues. It’s clear that this panel has significant potential, which is simply wasted out of the box due to poor presets. However, we have one serious reservation that calibration cannot fully overcome – it's about brightness management in HDR mode. The LG algorithm in this model is very conservative. The TV deliberately dims the HDR image to avoid clipping the already weak blacks of the IPS panel. The developers faced a choice: either provide more light and accept that black would become light grey, or dial down the brightness to maintain any contrast. They chose the latter. Despite this, after our adjustments, watching anything on the NANO81 is considerably better.

If there's one area where Haier clearly shows it still has a lot to catch up on compared to the market leaders, it's digital image processing. The upscaling, well... it's just okay. And that's really all that can be said about it. It does what it's supposed to do: ensures that lower resolution signals don't scare you with harsh pixelation on the screen and don't look like a forcibly enlarged postage stamp. However, it's far from the finesse and "intelligent" sharpening that more experienced players in this market have developed over the years. The biggest issue with the Q80FUX software is the almost complete lack of additional "cleaning" and smoothing features for the image. The receiver offers no noise reduction mechanisms or gradient enhancement. This means that with older or highly compressed materials, we simply have to accept that all the imperfections in tonal transitions or colour blending, which we mentioned earlier, will constantly accompany us during viewing.

It often happens that cheap 4K panels ruthlessly expose all the "dirty laundry" and imperfections in lower resolution materials. However, with the LG NANO81A, the situation is completely different. It's a really solid performer when it comes to handling content that's far from ideal. The built-in processor does a great job with upscaling. Even older recordings look quite decent on this screen – the image is coherent, cleaned of digital noise, and simply pleasant to the eye. A big plus is the gradation reduction feature, which you can find in the settings. It is exceptionally effective in combating colour banding, which is a godsend when watching low bitrate materials, such as from some streaming services or older files from the web. However, it is worth maintaining a certain vigilance. Since we are dealing with a less powerful chip than in LG's top models, too aggressive a setting for this option can sometimes result in minor artifacts or slight blurring of details. Despite this risk, I definitely encourage experimentation with this feature – in many cases, it can save the viewing experience and make low-quality material fully watchable.

The issue of motion fluidity and blurring is largely predetermined by the use of a 60Hz panel, which naturally makes it difficult to recommend this receiver to enthusiasts of very dynamic content. Fortunately, in the Q80FUX, we find a few options (although, as will soon become clear, really just one) intended to enhance the experience with older film productions. There is a "De-Judder" slider available, which indeed affects motion fluidity and allows us to adjust it to our preferences: from raw, cinematic frame rates to a more theatrical, smoothed presentation. However, a true surprise awaits us right next to it in the menu. There is also a second slider, supposedly dedicated to removing blur – this is a feature we typically encounter in 120Hz panels, aimed at combating blurring in sports. As we expected, recalling memories from testing the K85F model, here too this slider is merely a façade. Its adjustment contributes absolutely nothing to the picture and simply seems to be an oversight by the product engineers who left a non-functional option in the software for this type of panel.

In terms of motion fluidity, the NANO81A unfortunately has a bit of a hurdle. The television is based on a panel with a refresh rate of 60Hz. If you're looking for perfect sharpness in dynamic football matches or fast-paced action games, you might feel somewhat dissatisfied. With such a low native refresh rate, fast objects on the screen will always be a bit blurry.

Entering the realm of gaming, the Haier Q80FUX proves to be quite a good companion for the "casual gamer." It is equipped with some highly sought-after features today such as VRR (variable refresh rate) and ALLM (automatic low latency mode). However, the biggest surprise is something else. Even though we don't have a 4K@120Hz panel here, the television can accept and display a 120Hz signal at a lower resolution (Full HD). This is a very useful feature, allowing you to consciously switch the console to a lower resolution mode in exchange for significantly higher fluidity, which is a perfectly acceptable compromise in the gaming world.

We won't particularly complain about the lack of additions like the "Game Bar," as it's just a nice extra. However, the most concerning issues arise when we enter the world of HDR in gaming. Due to the fact that the television continuously adapts the signal "in its own way," setting the brightness on the console according to the HGIG standard is almost impossible to accomplish according to the instructions. Worse still, in Dolby Vision mode for gaming, the input lag increases to around 50 ms, which is a high enough value that essentially makes this mode unusable. Generally speaking, we still wouldn't recommend gaming on this television in HDR mode, so these aren't that serious shortcomings. What’s most pleasing is the presence of 120Hz in Full HD, making the Q80FUX quite a cool television for the occasional gamer.

NANO81A is unfortunately not a device designed with esports in mind. The lack of 120 Hz signal support is a fact that users planning to purchase this model simply have to accept. Nevertheless, LG’s engineers have worked hard to squeeze the maximum potential from this 60 Hz panel, offering a set of features that genuinely improve gaming comfort. First and foremost, the television supports VRR technology (in the range of 48–60 Hz) and ALLM. This ensures that the image remains stable and does not "tear," and the device automatically switches to low latency mode as soon as it detects a signal from a console. Managing these settings is extremely simple thanks to a dedicated system overlay that allows for a quick preview of parameters without leaving the game. A very significant advantage is support for the HGiG format. This solution is crucial for owners of modern consoles, as it allows the television to correctly "understand" the intentions of game developers regarding HDR tone mapping. In practice, this helps avoid the effect of "blown-out" bright spots, such as clouds or light sources, which is unfortunately a common issue in budget LCD televisions.