Haier K85F vs LG NANO81A / NANO80A

Let’s now move on to one of the hottest topics in the world of televisions, which is the quality of HDR performance. In the case of the Haier K85F model, we unfortunately have to make it clear: if you’re looking for equipment to watch content in a wide dynamic range, you should steer clear of this model. The main issue is its very low peak brightness, which during our tests barely reached 250 nits. To give you a better idea of what that means – this level is fine for watching standard SDR content, but it’s absolutely insufficient to show any real benefits of HDR. The image simply doesn’t have the "power" to generate bright, striking highlights. All of our measurements and tests on specialised test patterns confirmed this. As if that wasn’t enough, the television also struggles with colour reproduction. In this budget build, there are no technologies that broaden the colour gamut, such as quantum dot layers (marketed as "QLED"). As a result, the coverage of the DCI-P3 colour space, which is crucial for HDR content, is only around 80%. In practice, this means that the image will not only be dark but also devoid of the vibrant, saturated colours that the director wanted to show us.

If you're hoping that HDR on the NANO81A will bring tears to your eyes, I have to disappoint you. This TV is just too dark to show what this format is really about. With a brightness of only 250 nits, HDR really only exists on paper here. In practice, during viewing, it's very hard to tell whether we're watching material in high dynamic range or regular SDR – it simply lacks that “punch” of light in the bright parts of the image. But, to balance out the criticism, we do have one light at the end of the tunnel – and quite a distinct one at that. It's about colour gamut coverage. Here, the NanoCell filter shows that it's not just marketing nonsense. Our measurements indicated that the coverage of the DCI-P3 space is around 88%. That's a really solid result, placing this model significantly above typical budget models based on regular white LEDs without any filters. Of course, it still lags a bit behind QLED TVs or advanced panels with PFS filters, but for this price range, the colours are surprisingly saturated and vibrant. It’s just a shame that this low brightness doesn't allow them to fully “spread their wings” with the Nano filter.

Alright, how does the television handle colours straight out of the box, without any intervention from our side? The Haier K85F offers a whole range of picture modes, such as Dynamic or Eco, but for anyone wanting to watch films according to the creators' intentions, there's essentially only one that matters: Film mode. This is where we focused our tests, and unfortunately, its name has little to do with reality. The picture on factory settings is very far from what we could call cinematic fidelity and requires many adjustments. Let's start with the white balance, which has a clear deficiency of red colour. In practice, this means the entire image has a cool, bluish tint. Even worse is the issue of brightness management, that is, the gamma curves (for SDR) and EOTF (for HDR). Their graph resembles a true rollercoaster, which terribly impacts the viewing experience. This results in unnatural dimming of SDR content, causing details in the shadows to be lost, and in the case of HDR – an excessive brightening that further exacerbates the problem of clipping. Such a combination, which consists of too cool white combined with chaotic brightness and too much blue colour saturation, leads to enormous errors in colour reproduction. Our measurements on a specialist ColourChecker chart showed errors (Delta E) regularly reaching and exceeding values of 8-9. To put it simply: errors above the threshold of 3 are easily noticeable to the naked eye, so such a result means that the colours on the screen are simply heavily distorted.

For every film fan, the natural choice in LG televisions is the Filmmaker Mode. It is designed to show the image as the director intended – without unnecessary "enhancements". Unfortunately, in the case of our test unit NANO81A, the factory settings left a bit to be desired. The main issue turned out to be the white balance. Measurements revealed a distinct deficiency of blue, which in practice meant that many scenes had a slightly yellowish, even "yellowed" tint. The white wasn’t perfectly clean, which took away the freshness of the image. Additionally, the brightness management wasn't perfect either – the factory-set gamma was too low. The image often appeared oversaturated, as if it had been pulled too much from the shadows, which detracted from its naturalness and depth. Fortunately, LG, even in this relatively low price range, does not block access to advanced settings. The calibration options for this model are extensive, which is a significant plus for those who enjoy "fiddling" in the menu. We decided to approach the matter our way and see how much we could squeeze out of this panel with professional calibration.

No good, but can anything be done about this picture? Is professional calibration able to save the situation? The answer is both yes and no. It needs to be said clearly that there are certain things we cannot overcome. The limitations of the construction itself, namely a poor panel and its narrow colour coverage, mean that you can forget about a sensible HDR effect – we won't be pulling the wool over your eyes on that. The biggest beneficiary of our adjustments is undoubtedly the SDR mode, and it is for watching such content, after calibration, that this television starts to make sense. We managed to tame the white balance in our own way. Although the television only offers basic, 2-point adjustment (rather than precise, 20-point), it's not perfect, but we successfully eliminated that unpleasant, cold "chill" in the picture. Above all, though, we noted a huge improvement in brightness management. The gamma curve, which previously resembled a rollercoaster, looks like an almost perfectly straight line after calibration. This is a sign that the television can finally display an image without artificially dimming or brightening it. The conclusion is simple: even with such a cheap television, professional setting correction can achieve a great deal and extract the maximum potential from it.

After calibration, the NANO81A is a completely different television. What LG offers in terms of image enhancement tools, even in such an affordable model, deserves major credit. We were able to completely eliminate that annoying yellowing of whites and make the colours natural, vibrant, and simply "real". In SDR content (i.e., regular television, YouTube, or older films), the picture now looks miles better – it’s clean, well-balanced, and no longer strains the eyes with strange hues. It’s clear that this panel has significant potential, which is simply wasted out of the box due to poor presets. However, we have one serious reservation that calibration cannot fully overcome – it's about brightness management in HDR mode. The LG algorithm in this model is very conservative. The TV deliberately dims the HDR image to avoid clipping the already weak blacks of the IPS panel. The developers faced a choice: either provide more light and accept that black would become light grey, or dial down the brightness to maintain any contrast. They chose the latter. Despite this, after our adjustments, watching anything on the NANO81 is considerably better.

Let’s move on to digital processing and image scaling, specifically how the Haier K85F handles lower resolution signals, such as from regular television. Right off the bat, we encounter an incredibly annoying and completely incomprehensible issue – the overscan is enabled by default. This means the television artificially enlarges the image, cutting off its edges on every source, even 1080p. To see the full frame, you have to dig into the screen settings each time and manually switch the format to "stretch to 16:9." It's a minor detail, but devilishly frustrating. The scaling of content to 4K resolution can be described in one word: acceptable. And that's about it. The image processor doesn't strip detail from the image, nor does it generate jagged edges or other artifacts. It simply does its job, without any bells and whistles. It’s alright, but nothing more. The most significant and noticeable shortcoming in the digital processing section is, however, the absence of a tone transition smoothing feature. This is an algorithm that could significantly reduce the annoying banding effect we mentioned earlier. Unfortunately, the manufacturer did not foresee such a solution, condemning us to watch the imperfections of the panel and low-quality material in all their glory.

It often happens that cheap 4K panels ruthlessly expose all the "dirty laundry" and imperfections in lower resolution materials. However, with the LG NANO81A, the situation is completely different. It's a really solid performer when it comes to handling content that's far from ideal. The built-in processor does a great job with upscaling. Even older recordings look quite decent on this screen – the image is coherent, cleaned of digital noise, and simply pleasant to the eye. A big plus is the gradation reduction feature, which you can find in the settings. It is exceptionally effective in combating colour banding, which is a godsend when watching low bitrate materials, such as from some streaming services or older files from the web. However, it is worth maintaining a certain vigilance. Since we are dealing with a less powerful chip than in LG's top models, too aggressive a setting for this option can sometimes result in minor artifacts or slight blurring of details. Despite this risk, I definitely encourage experimentation with this feature – in many cases, it can save the viewing experience and make low-quality material fully watchable.

The panel in the K85F model operates at a native refresh rate of 60 Hz, which sets certain expectations for image smoothness right from the start. However, we must admit that we were very positively surprised when we found two separate motion control sliders in the settings menu: one labelled "Motion Blur Reduction" and the other "De-Judder." Such generosity in this price segment is an absolute rarity, as manufacturers usually offer at most one shared option. Unfortunately, our enthusiasm faded as quickly as it appeared. It soon became clear why Haier was so "generous" – the slider responsible for reducing motion blur is simply a decoy. Sliding it makes absolutely no visible difference on the screen, so only one of the two options works.

In terms of motion fluidity, the NANO81A unfortunately has a bit of a hurdle. The television is based on a panel with a refresh rate of 60Hz. If you're looking for perfect sharpness in dynamic football matches or fast-paced action games, you might feel somewhat dissatisfied. With such a low native refresh rate, fast objects on the screen will always be a bit blurry.

Let’s move on to the features for gamers, although we must point out straight away that this is more of a proposal for the "occasional" ones. The manufacturer does boast in the specifications about having HDMI 2.1 ports, which looks impressive on paper, but in reality, it’s largely a marketing ploy. What good is a modern port when the heart of the television is a panel with a refresh rate of 60 Hz? It physically cannot display a signal at 120 frames per second, even at lower resolutions, which takes away HDMI 2.1’s key advantage. What a shame. (That’s why in our tests we note this as HDMI 2.0 ports). Another odd issue is the TV's response to an attempt to calibrate HDR from the console. Changes to brightness settings result in very unnatural image behaviour, which could suggest incorrect implementation of the HGiG standard. To be honest, one shouldn’t worry too much about this, as we have repeatedly mentioned, we simply do not recommend using any HDR content on this screen. However, to counterbalance the negatives, the Haier K85F does have two big and unexpected advantages. The first is the presence of ALLM, or automatic game mode, which switches the TV to low latency mode as soon as it detects a connected console. The second, even bigger surprise, is support for VRR, or variable refresh rate. While it operates within a very modest range of 48-60 Hz, its mere presence is commendable. Thanks to this, the image in games can “tear” less, which realistically improves the gaming experience.

NANO81A is unfortunately not a device designed with esports in mind. The lack of 120 Hz signal support is a fact that users planning to purchase this model simply have to accept. Nevertheless, LG’s engineers have worked hard to squeeze the maximum potential from this 60 Hz panel, offering a set of features that genuinely improve gaming comfort. First and foremost, the television supports VRR technology (in the range of 48–60 Hz) and ALLM. This ensures that the image remains stable and does not "tear," and the device automatically switches to low latency mode as soon as it detects a signal from a console. Managing these settings is extremely simple thanks to a dedicated system overlay that allows for a quick preview of parameters without leaving the game. A very significant advantage is support for the HGiG format. This solution is crucial for owners of modern consoles, as it allows the television to correctly "understand" the intentions of game developers regarding HDR tone mapping. In practice, this helps avoid the effect of "blown-out" bright spots, such as clouds or light sources, which is unfortunately a common issue in budget LCD televisions.