Dreame S100 vs TCL P7L / P79L

The Dreame S100 is a relatively bright television. In movie mode, the brightness we measured reached around 600 nits. This is a really good result, although not the highest considering the competition in this price range. In full-screen scenes, it's clear that the television can generate an image that hits the mark in terms of brightness. Unfortunately, when more complex scenes appeared on the screen, the local dimming algorithm in this model tried above all to maintain the deepest blacks. However, this came at the expense of the HDR effect – and in a drastic way. In such scenes, the brightness of the bright elements fell below 100 nits, which is a downright tragic result, far from any HDR effect. This aspect can be improved, but there are caveats. You just need to change the local dimming setting in the television's menu; however, then the blacks in such scenes simply turn grey. It's a pity that Dreame wasn't able to refine the local dimming algorithms better, and the S100 is another example that the number of local dimming zones doesn't always translate into a better picture. As a consolation, it's worth noting that the Dreame S100 is marketed as a 'QLED' type television, although it actually uses a PFS LED filter. As a result, the colours are appropriately saturated, and our measured DCI-P3 colour gamut coverage exceeded 94%.

The biggest limitation of the TCL P7L in HDR is simply brightness. The TV doesn't have much luminance headroom, so strong highlights, sunlight or small light sources can't clearly "pop" out of the image. As a result, even well-produced HDR material looks fairly restrained and, in terms of dynamics, is closer to good SDR than to what brighter models show. That doesn't mean the P7L completely fails at HDR; the issue is mainly a lack of sufficient backlight power. Looking at colours, the situation is a bit better. The TV covers roughly 91% of the DCI‑P3 gamut and about 68% of the wide BT.2020 space, so for its price class the colour range is quite decent. TCL markets this model as QLED, although the nature of the solution used is closer to a PFS phosphor‑based backlight than a classic quantum dot layer. What matters most to the viewer is the effect: more saturated colours are on offer.

We tested the Dreame S100 in "movie" mode and definitely recommend using this setting for watching all kinds of content. Interestingly, in the deeper settings of the TV, we also find a dedicated "Filmmaker" mode, which is now available from almost every manufacturer. However, in the case of the Dreame S100, we do not recommend using it – it blocks all settings related to the picture and does not allow for any configuration in the menu - not even a motion smoother. So how do the factory colours fare in the S100? Not too bad, but not great either. The TV itself had a noticeable blue tint, which is clearly evident in our white balance measurements. As a result, the picture was artificially brightened, and the colours had a slight bluish tint. This is also confirmed by the Color Checker palette, which showed how the colour samples leaned towards blue, generating quite significant colour errors. On the other hand, the picture looked definitely better in HDR mode, where the colour errors were not as prominent, although they were still far from ideal. Here, the white balance was also too heavily skewed towards blue, causing quite significant errors in color reproduction.

In Film mode the TCL P7L performs quite decently without major tweaks, especially with ordinary SDR material. The white balance is relatively even, although as brightness increases there’s a slight rise in red and blue and a bit too little green. That doesn’t create a strongly visible colour cast and most colours remain close to their reference points. The Colour Checker confirms this, with a large portion of errors falling below the level that should particularly bother during normal viewing. We have more remarks about the gamma response. In the darkest parts of the image the TV drives it noticeably above the reference, so some shadow detail may be a little too dim. The curve then settles and for much of the range it’s close to the intended targets. As a result SDR generally looks natural, but in dark scenes the P7L can lose some subtlety.

In HDR the factory setup is less precise. As brightness increases the excess blue becomes more pronounced, so the picture can look cooler than it should. The number of larger colour deviations also rises, especially in brighter colours. The EOTF curve itself is handled fairly conservatively, with the TV showing the image darker than the reference over much of the range. For such an inexpensive model, the factory Film mode settings are not bad.

The Dreame S100 has proven to be a device very amenable to professional calibration. In its menu, we found a plethora of advanced options that allowed us to effectively correct factory errors. Thanks to the advanced white balance correction – both in SDR and HDR content – we completely eliminated excess blue components. The image instantly became much more natural and pleasant to view. After fully tuning the colours, the errors in the Color Checker test dropped below a Delta E value of 2-3. For the average viewer, this means that any colour distortions became almost impossible to see with the naked eye. It's really a nice surprise, as often new brands in the TV market have significant problems with the correct implementation and functioning of sliders in the calibration menu. Here, everything worked as it should. The only thing we need to criticise is the way the TV manages its brightness in HDR. Due to the specific nature of the local dimming algorithms, our measured EOTF curve shows anomalies. In places where high highlights should appear, there is a slight bump in the curve above the reference line. In practice, this results in unnatural brightening of certain, the brightest elements in movies or games. Despite this minor flaw, professional calibration brings a huge, very positive change to this model.

After calibration the TCL P7L can produce a genuinely pleasant picture, especially with conventional SDR material. We managed to even out the white balance very well, and the gamma curve now tracks close to the target value of 2.4. This is also evident in the colour measurements, as most errors have fallen significantly and in everyday viewing it’s hard to notice any major inaccuracies. Films, series, YouTube and regular TV therefore look more natural, without unnecessary warmth or a cool tint. For a model at this price point the SDR result is really very good.

In HDR the situation becomes more complicated. Calibration improved the white balance and corrected some deviations, but here the panel’s limitations become increasingly apparent. The P7L has relatively limited brightness and can’t sustain appropriate luminance for more saturated colours, so some errors remain even after careful tuning. In other words, settings can improve how the TV interprets the signal, but you can’t overcome its physical capabilities. That’s why calibration is most worthwhile for SDR on this model.

For scaling and digital processing in the Dreame S100, the technology used is proudly called Dreamind™ Pro AI by the manufacturer. However, it must be clearly stated that this is not a proprietary processor but rather a marketing term for a chip from MediaTek – specifically, the model MT5889. Unfortunately, we are talking about a rather outdated unit from a time when MediaTek lagged significantly behind the competition in terms of performance. This, unfortunately, has a direct impact on the image, as this chip also handles that. The upscaling in the S100 is fairly average, and the processor has a tendency to artificially over-sharpen edges (fortunately, this can be somewhat tempered with the sharpness slider in the menu). In the options, we also find a feature called "Contour Smoothing," which theoretically is supposed to improve tonal transitions. In practice, it contributes almost no improvement – setting it to any level rarely eliminates visible colour banding, but it can unnecessarily blur elements of the image that should remain sharp.

Another issue is the phenomenon of overscan (cropping the edges of the frame), which is practically visible all the time. Although there is the possibility to set the screen to display the full frame in low-resolution materials, it requires activating the aforementioned Filmmaker mode. And as you may know, this mode completely blocks any changes to other sliders in the picture menu. In our test tables, we noted that the television offers an option to disable overscan, as such a function technically exists in the system – however, in everyday use, while maintaining reasonable picture settings, you will not be able to take advantage of it.

In this respect the TCL P7L performs surprisingly well, especially for such an inexpensive TV. The banding reduction feature, which in many budget models does little or nothing, actually manages to improve the picture here. It doesn't remove all banding completely, but it can noticeably reduce posterisation and make trickier gradients look more natural. In this price segment that's a genuinely pleasant surprise.

The upscaling itself also looks good. Lower-resolution material is upscaled properly, without excessive sharpening or adding artificial edges around objects. Of course the P7L won't turn a very poor source into a 4K-quality picture, but for regular TV the result is simply solid. For a model at this price point there are few major complaints to make.

When it comes to motion fluidity, the Dreame S100 performs really well. It features a 144 Hz refresh rate panel, although in reality, the vast majority of people using it in a conventional way will still be limited to 120 Hz (as this is what today's hardware allows aside from PCs). Thanks to the high refresh rate, the image in motion remains really sharp, largely due to the well-functioning MEMC motion smoother. In the menu, we find predefined modes that enable the TV to efficiently generate artificial frames, which effectively enhances the fluidity of dynamic sports shots, but also helps eliminate motion judder in film and TV series material recorded at 24 frames.

TCL P7L uses a native 60 Hz panel at 4K resolution, and that's how it should be treated in everyday use. For movies the TV mainly offers frame interpolation, so it can smooth motion and reduce noticeable judder, but it doesn't deliver the smoothness typical of true 120 Hz panels.

The Dreame S100 seems almost like the ideal screen for gamers. The television is equipped with 2 HDMI 2.1 ports with a bandwidth of 40 Gbps, allowing features such as automatic game mode (ALLM) or VRR frame synchronization in the range of 48-144 Hz to work seamlessly on consoles. On board, we also find a well-designed gaming panel (Game Bar). It allows you to continuously preview the most important parameters - from the activated picture modes, to the number of frames rendered by the console, right through to the option of adding a crosshair in the centre of the screen. All of this looks great on paper; however, the biggest issue with the S100 is its implementation of HDR in games. The television does not have a correctly implemented HGiG format. This means a clueless user may misconfigure the console during the initial setup of the screen. Poor configuration can result in an image that is too dark or overexposed (as a guideline: we suggest setting the brightness in the Xbox console menu to around 600 nits, and in the PS5 to 12 clicks). The Dolby Vision format also proves problematic, as it often did not activate at all on the XBOX – Dreame S100 line. And when it was eventually activated, playing was impossible due to the very high input lag often exceeding 100ms. If the manufacturer manages to improve the HDR gaming experience with an update, the S100 will be truly outstanding hardware for gamers. For now, however, compromises must be accepted.

For such an inexpensive TV, the P7L has quite a lot to offer gamers. It has ALLM, VRR and Dolby Vision in games, and TCL also includes its Game Bar, where you can quickly check key information or change some settings without leaving the game. Not everything is perfect, though, because HGiG doesn't work here as it should, but at this price point it's hard to complain much about the feature set. The most interesting part comes when you give up 4K. At that resolution the TV runs at up to 60 Hz, but at 1440p and 1080p it can already display at 120 Hz. And that's not just a spec-sheet curiosity. In fast-paced games that support that frame rate the difference in smoothness is genuinely noticeable, so if you care more about smoother motion than maximum image sharpness, that mode can make a lot of sense. Of course, that doesn't make the P7L a true 120 Hz TV. Still, it's precisely these extra modes that make the P7L perform really well for gaming.