Dreame S100 vs LG MRGB85B

The Dreame S100 is a relatively bright television. In movie mode, the brightness we measured reached around 600 nits. This is a really good result, although not the highest considering the competition in this price range. In full-screen scenes, it's clear that the television can generate an image that hits the mark in terms of brightness. Unfortunately, when more complex scenes appeared on the screen, the local dimming algorithm in this model tried above all to maintain the deepest blacks. However, this came at the expense of the HDR effect – and in a drastic way. In such scenes, the brightness of the bright elements fell below 100 nits, which is a downright tragic result, far from any HDR effect. This aspect can be improved, but there are caveats. You just need to change the local dimming setting in the television's menu; however, then the blacks in such scenes simply turn grey. It's a pity that Dreame wasn't able to refine the local dimming algorithms better, and the S100 is another example that the number of local dimming zones doesn't always translate into a better picture. As a consolation, it's worth noting that the Dreame S100 is marketed as a 'QLED' type television, although it actually uses a PFS LED filter. As a result, the colours are appropriately saturated, and our measured DCI-P3 colour gamut coverage exceeded 94%.

LG MRGB85 offers moderate brightness. On test patterns it reaches around 700 nits, which is a decent result in itself. In real movie scenes, however, values are lower and most often fall in the 400 to 600 nits range. Bright, wide shots look best. In scenes with large areas of black the TV noticeably reduces luminance, attempting to keep contrast as high as possible. The HDR effect is therefore visible, but it is far from the level offered by more advanced Mini-LED designs. Particularly in darker parts of films, the limitations of the edge-lit backlight and imprecise local dimming become apparent again.

HDR colours

A much stronger suit of the MRGB85 is its colour. The TV covers around 95% of the DCI-P3 colour space and 74% of BT.2020, so HDR content can look vivid and impressive. Colours are well saturated, and the difference compared with basic LCD TVs is clearly noticeable. It is worth noting, however, that this is not a classic RGB backlight, where each of the three primary colours is generated by a separate diode. Red is produced by a PFS phosphor, which expands the palette and achieves more saturated red tones. This solution performs well for colour reproduction, but it does not change the limitations of the local dimming. The diodes are not driven independently in the way the series name might suggest... so it turns out that Mini RGB is not the same as Mini-LED RGB!

We tested the Dreame S100 in "movie" mode and definitely recommend using this setting for watching all kinds of content. Interestingly, in the deeper settings of the TV, we also find a dedicated "Filmmaker" mode, which is now available from almost every manufacturer. However, in the case of the Dreame S100, we do not recommend using it – it blocks all settings related to the picture and does not allow for any configuration in the menu - not even a motion smoother. So how do the factory colours fare in the S100? Not too bad, but not great either. The TV itself had a noticeable blue tint, which is clearly evident in our white balance measurements. As a result, the picture was artificially brightened, and the colours had a slight bluish tint. This is also confirmed by the Color Checker palette, which showed how the colour samples leaned towards blue, generating quite significant colour errors. On the other hand, the picture looked definitely better in HDR mode, where the colour errors were not as prominent, although they were still far from ideal. Here, the white balance was also too heavily skewed towards blue, causing quite significant errors in color reproduction.

We tested the TV in Filmmaker Mode because, of the available presets, it produced the image closest to reference. The out-of-the-box colour reproduction wasn’t perfect, though. The biggest deviations were in the white balance, with too much red and not enough blue in the image, so the overall picture shifted noticeably towards warmer tones. Whites took on a slightly yellowish tint, and skin tones and bright areas didn’t always look natural. It wasn’t a fault that ruined the viewing experience, but in a direct comparison with the same panel after calibration the difference was clearly visible.

The Dreame S100 has proven to be a device very amenable to professional calibration. In its menu, we found a plethora of advanced options that allowed us to effectively correct factory errors. Thanks to the advanced white balance correction – both in SDR and HDR content – we completely eliminated excess blue components. The image instantly became much more natural and pleasant to view. After fully tuning the colours, the errors in the Color Checker test dropped below a Delta E value of 2-3. For the average viewer, this means that any colour distortions became almost impossible to see with the naked eye. It's really a nice surprise, as often new brands in the TV market have significant problems with the correct implementation and functioning of sliders in the calibration menu. Here, everything worked as it should. The only thing we need to criticise is the way the TV manages its brightness in HDR. Due to the specific nature of the local dimming algorithms, our measured EOTF curve shows anomalies. In places where high highlights should appear, there is a slight bump in the curve above the reference line. In practice, this results in unnatural brightening of certain, the brightest elements in movies or games. Despite this minor flaw, professional calibration brings a huge, very positive change to this model.

Calibration primarily corrected the white balance and removed the previously noticeable warm cast. After the correction, whites no longer had a yellow tint and colours became more neutral and natural. The biggest improvement was seen in SDR material, where the picture looked even and much closer to the reference. A similar effect was achieved in HDR. After calibration the image became more controlled, although not all of the TV’s limitations could be eliminated. The main issue remained intense reds, which were not always reproduced with sufficient precision. In practice the MRGB85 handles everyday SDR content very well, but in more demanding HDR material its limitations are still clearly visible.

For scaling and digital processing in the Dreame S100, the technology used is proudly called Dreamind™ Pro AI by the manufacturer. However, it must be clearly stated that this is not a proprietary processor but rather a marketing term for a chip from MediaTek – specifically, the model MT5889. Unfortunately, we are talking about a rather outdated unit from a time when MediaTek lagged significantly behind the competition in terms of performance. This, unfortunately, has a direct impact on the image, as this chip also handles that. The upscaling in the S100 is fairly average, and the processor has a tendency to artificially over-sharpen edges (fortunately, this can be somewhat tempered with the sharpness slider in the menu). In the options, we also find a feature called "Contour Smoothing," which theoretically is supposed to improve tonal transitions. In practice, it contributes almost no improvement – setting it to any level rarely eliminates visible colour banding, but it can unnecessarily blur elements of the image that should remain sharp.

Another issue is the phenomenon of overscan (cropping the edges of the frame), which is practically visible all the time. Although there is the possibility to set the screen to display the full frame in low-resolution materials, it requires activating the aforementioned Filmmaker mode. And as you may know, this mode completely blocks any changes to other sliders in the picture menu. In our test tables, we noted that the television offers an option to disable overscan, as such a function technically exists in the system – however, in everyday use, while maintaining reasonable picture settings, you will not be able to take advantage of it.

Upscaling and digital image processing perform quite well in the LG MRGB85. The Alpha 8 AI 4K Gen7 processor efficiently upscales lower-resolution material, and you can easily turn off overscan regardless of the source. The TV also handles compression artefacts well. The "Smooth Gradation" function can effectively reduce visible banding and tonal unevenness, but it isn't always precise. At higher settings it can also smooth out fine details, such as the texture of materials. A plus is that it doesn't remove film grain. The safest option is the "Low" or "Medium" setting, which offers the best compromise between artefact reduction and preserving detail.

When it comes to motion fluidity, the Dreame S100 performs really well. It features a 144 Hz refresh rate panel, although in reality, the vast majority of people using it in a conventional way will still be limited to 120 Hz (as this is what today's hardware allows aside from PCs). Thanks to the high refresh rate, the image in motion remains really sharp, largely due to the well-functioning MEMC motion smoother. In the menu, we find predefined modes that enable the TV to efficiently generate artificial frames, which effectively enhances the fluidity of dynamic sports shots, but also helps eliminate motion judder in film and TV series material recorded at 24 frames.

The LG MRGB85 is fitted with a VA panel with a native 144 Hz refresh rate, so its motion handling is very good. The TV easily handles 120 Hz content from consoles and higher refresh rates when connected to a PC. That matters not only for gaming but also when watching sport, where camera motion is noticeably smoother than on basic 60 Hz panels. There’s also the TruMotion system, which lets you set the level of motion smoothing yourself. You can keep a more cinematic motion or increase smoothness, which works well for live sports and TV programmes. The adjustment range is wide, so you can easily tailor the motion smoothing to your own preferences.

The Dreame S100 seems almost like the ideal screen for gamers. The television is equipped with 2 HDMI 2.1 ports with a bandwidth of 40 Gbps, allowing features such as automatic game mode (ALLM) or VRR frame synchronization in the range of 48-144 Hz to work seamlessly on consoles. On board, we also find a well-designed gaming panel (Game Bar). It allows you to continuously preview the most important parameters - from the activated picture modes, to the number of frames rendered by the console, right through to the option of adding a crosshair in the centre of the screen. All of this looks great on paper; however, the biggest issue with the S100 is its implementation of HDR in games. The television does not have a correctly implemented HGiG format. This means a clueless user may misconfigure the console during the initial setup of the screen. Poor configuration can result in an image that is too dark or overexposed (as a guideline: we suggest setting the brightness in the Xbox console menu to around 600 nits, and in the PS5 to 12 clicks). The Dolby Vision format also proves problematic, as it often did not activate at all on the XBOX – Dreame S100 line. And when it was eventually activated, playing was impossible due to the very high input lag often exceeding 100ms. If the manufacturer manages to improve the HDR gaming experience with an update, the S100 will be truly outstanding hardware for gamers. For now, however, compromises must be accepted.

When it comes to gaming, the LG MRGB85 performs by far the best. The manufacturer hasn’t skimped on the kit and has essentially carried over the full suite of features from pricier TVs into this model. You get three HDMI 2.1 ports with full 48 Gb/s bandwidth. Each supports 4K 120 Hz from a console, and when connected to a PC also 4K 144 Hz. So you don’t need to worry which port to plug your console or PC into, as they all offer the same set of capabilities.

On board you’ll also find VRR, AMD FreeSync Premium, NVIDIA G-Sync Compatible, ALLM and HGiG. Dolby Vision Gaming is included too, allowing supported games to use high refresh rates and dynamic HDR simultaneously on Xbox. Rounding it off is Game Optimizer, a handy in-game menu. Without leaving the game you can change the picture profile, brighten shadow detail or check the current frame rate. In terms of gaming features, the MRGB85 therefore offers almost the same as significantly more expensive LG models.