Dreame S100 vs Hisense UR8S

The Dreame S100 is a relatively bright television. In movie mode, the brightness we measured reached around 600 nits. This is a really good result, although not the highest considering the competition in this price range. In full-screen scenes, it's clear that the television can generate an image that hits the mark in terms of brightness. Unfortunately, when more complex scenes appeared on the screen, the local dimming algorithm in this model tried above all to maintain the deepest blacks. However, this came at the expense of the HDR effect – and in a drastic way. In such scenes, the brightness of the bright elements fell below 100 nits, which is a downright tragic result, far from any HDR effect. This aspect can be improved, but there are caveats. You just need to change the local dimming setting in the television's menu; however, then the blacks in such scenes simply turn grey. It's a pity that Dreame wasn't able to refine the local dimming algorithms better, and the S100 is another example that the number of local dimming zones doesn't always translate into a better picture. As a consolation, it's worth noting that the Dreame S100 is marketed as a 'QLED' type television, although it actually uses a PFS LED filter. As a result, the colours are appropriately saturated, and our measured DCI-P3 colour gamut coverage exceeded 94%.

UR8S is a higher-end Mini-LED, so you could expect plenty of brightness. Indeed, on a synthetic test pattern peak brightness reached about 2200 nits. That’s a very good result, but as always what the TV does in normal film scenes matters much more. Here the results are a bit more mixed. In bright scenes with lots of light on screen, the UR8S can deliver very strong HDR. Brightness then gets up to around 1500 nits, so the image is very intense and has a lot of punch. It’s worse with small bright elements on a dark background. The TV noticeably dims them to preserve deep blacks and avoid excessive blooming. As a result, things like single stars or small specular highlights can be only around 200 nits. And here HDR is no longer as impressive. So the local dimming algorithm works effectively, but it comes at a cost — sometimes it sacrifices the brightness of small details too much in favour of contrast.

Colours

For RGB Mini-LED TVs, colours should be evaluated a little differently than usual. If we look only at the panel’s capabilities, the UR8S performs excellently. We measured about 94% coverage of BT.2020 and virtually full DCI-P3. Those are among the highest figures currently seen in LCD TVs, and this is where the potential of the RGB backlight is most apparent. The problem is that this potential isn’t always used in real scenes. When we ran the same measurements on patterns overlaid with a film-like background, saturation of some colours started to fall noticeably. Individual zones can’t always control the three RGB components with the same precision when the scene becomes more complex. It’s most noticeable with blue and magenta. On simple test patches they can look very strong, but in tougher scenes samples of those colours clearly shrink. In other words, the UR8S has huge potential, but the TV can’t always take full advantage of it in every scene.

We tested the Dreame S100 in "movie" mode and definitely recommend using this setting for watching all kinds of content. Interestingly, in the deeper settings of the TV, we also find a dedicated "Filmmaker" mode, which is now available from almost every manufacturer. However, in the case of the Dreame S100, we do not recommend using it – it blocks all settings related to the picture and does not allow for any configuration in the menu - not even a motion smoother. So how do the factory colours fare in the S100? Not too bad, but not great either. The TV itself had a noticeable blue tint, which is clearly evident in our white balance measurements. As a result, the picture was artificially brightened, and the colours had a slight bluish tint. This is also confirmed by the Color Checker palette, which showed how the colour samples leaned towards blue, generating quite significant colour errors. On the other hand, the picture looked definitely better in HDR mode, where the colour errors were not as prominent, although they were still far from ideal. Here, the white balance was also too heavily skewed towards blue, causing quite significant errors in color reproduction.

For evaluating the factory colours we used Filmmaker mode, which is supposed to show the image as close as possible to how the content was prepared. And if you look at the white balance alone, the UR8S performs quite well. There’s no strong tint that immediately jumps out, although as brightness increases a bit too much blue and red start to appear, with a corresponding lack of green. Colour errors are therefore visible in measurements, but the image itself doesn’t look bad.

We have much bigger reservations about how the UR8S manages image brightness. In SDR the gamma stays around 1.9–2.0 for most of the range instead of the target 2.4. In practice this simply means the image is too bright, especially in the midtones. Shadows are lifted too much, so the picture loses some depth. A similar tendency is visible in HDR. The EOTF curve sits above the reference value for a large part of the range, so the UR8S again brightens the image more than it should. This isn’t a case of the TV lacking brightness, because it has plenty, but of how it manages that brightness. As a result, HDR material can look very striking, but not always exactly as it should.

The Dreame S100 has proven to be a device very amenable to professional calibration. In its menu, we found a plethora of advanced options that allowed us to effectively correct factory errors. Thanks to the advanced white balance correction – both in SDR and HDR content – we completely eliminated excess blue components. The image instantly became much more natural and pleasant to view. After fully tuning the colours, the errors in the Color Checker test dropped below a Delta E value of 2-3. For the average viewer, this means that any colour distortions became almost impossible to see with the naked eye. It's really a nice surprise, as often new brands in the TV market have significant problems with the correct implementation and functioning of sliders in the calibration menu. Here, everything worked as it should. The only thing we need to criticise is the way the TV manages its brightness in HDR. Due to the specific nature of the local dimming algorithms, our measured EOTF curve shows anomalies. In places where high highlights should appear, there is a slight bump in the curve above the reference line. In practice, this results in unnatural brightening of certain, the brightest elements in movies or games. Despite this minor flaw, professional calibration brings a huge, very positive change to this model.

Hisense offers quite a lot of calibration options, and in SDR you can achieve a really good result with them. After adjustment the white balance is practically even across the whole range, and colour errors fall to very low values. The UR8S can be set very precisely here. HDR looks a little different. The white balance can also be noticeably improved, although at the highest brightness levels larger deviations start to appear. Most interesting, however, is the behaviour of the EOTF curve. Even after correctly setting it on test patterns, the UR8S can still interpret brightness in its own way when watching films. Depending on the scene, parts of the picture are slightly brightened and others darkened compared with how they should look. This shows that the algorithms controlling the backlight have quite a large influence on the final image. Calibration therefore allows colours to be improved very well, but we are not able to completely 'turn off' the way the UR8S manages brightness in HDR.

For scaling and digital processing in the Dreame S100, the technology used is proudly called Dreamind™ Pro AI by the manufacturer. However, it must be clearly stated that this is not a proprietary processor but rather a marketing term for a chip from MediaTek – specifically, the model MT5889. Unfortunately, we are talking about a rather outdated unit from a time when MediaTek lagged significantly behind the competition in terms of performance. This, unfortunately, has a direct impact on the image, as this chip also handles that. The upscaling in the S100 is fairly average, and the processor has a tendency to artificially over-sharpen edges (fortunately, this can be somewhat tempered with the sharpness slider in the menu). In the options, we also find a feature called "Contour Smoothing," which theoretically is supposed to improve tonal transitions. In practice, it contributes almost no improvement – setting it to any level rarely eliminates visible colour banding, but it can unnecessarily blur elements of the image that should remain sharp.

Another issue is the phenomenon of overscan (cropping the edges of the frame), which is practically visible all the time. Although there is the possibility to set the screen to display the full frame in low-resolution materials, it requires activating the aforementioned Filmmaker mode. And as you may know, this mode completely blocks any changes to other sliders in the picture menu. In our test tables, we noted that the television offers an option to disable overscan, as such a function technically exists in the system – however, in everyday use, while maintaining reasonable picture settings, you will not be able to take advantage of it.

The big plus of the UR8S is its use of the MediaTek Pentonic 800 processor, and digital image processing is one of this model’s stronger points. The TV handles smoothing tonal transitions very well, especially with poorer-quality material. The feature responsible for this effect works effectively without overprocessing the picture. Even on a medium setting it can noticeably reduce visible banding and artefacts without heavily blurring details. Upscaling itself also performs very well. Lower-resolution content is displayed cleanly, edges look natural, and the image isn’t over-sharpened. The UR8S simply copes very well with weaker signals, and in that respect it’s one of its clear strengths.

When it comes to motion fluidity, the Dreame S100 performs really well. It features a 144 Hz refresh rate panel, although in reality, the vast majority of people using it in a conventional way will still be limited to 120 Hz (as this is what today's hardware allows aside from PCs). Thanks to the high refresh rate, the image in motion remains really sharp, largely due to the well-functioning MEMC motion smoother. In the menu, we find predefined modes that enable the TV to efficiently generate artificial frames, which effectively enhances the fluidity of dynamic sports shots, but also helps eliminate motion judder in film and TV series material recorded at 24 frames.

The UR8S is equipped with a panel that has a native 180 Hz refresh rate, so right away it offers very strong potential for smooth motion. The panel itself performs really well, although some limitations typical of VA panels are still visible. Smearing is relatively low for this type of screen, but during faster motion, especially on darker backgrounds, it can still be noticed, particularly if you compare the same image to OLED TVs.

The Dreame S100 seems almost like the ideal screen for gamers. The television is equipped with 2 HDMI 2.1 ports with a bandwidth of 40 Gbps, allowing features such as automatic game mode (ALLM) or VRR frame synchronization in the range of 48-144 Hz to work seamlessly on consoles. On board, we also find a well-designed gaming panel (Game Bar). It allows you to continuously preview the most important parameters - from the activated picture modes, to the number of frames rendered by the console, right through to the option of adding a crosshair in the centre of the screen. All of this looks great on paper; however, the biggest issue with the S100 is its implementation of HDR in games. The television does not have a correctly implemented HGiG format. This means a clueless user may misconfigure the console during the initial setup of the screen. Poor configuration can result in an image that is too dark or overexposed (as a guideline: we suggest setting the brightness in the Xbox console menu to around 600 nits, and in the PS5 to 12 clicks). The Dolby Vision format also proves problematic, as it often did not activate at all on the XBOX – Dreame S100 line. And when it was eventually activated, playing was impossible due to the very high input lag often exceeding 100ms. If the manufacturer manages to improve the HDR gaming experience with an update, the S100 will be truly outstanding hardware for gamers. For now, however, compromises must be accepted.

In terms of gamer features the UR8S stacks up really well. The TV supports virtually everything you'd expect from a modern console or PC display. It has ALLM, VRR, and 4K at 120 Hz. There's also Dolby Vision in game mode, so when using, for example, an Xbox Series X you don't have to give up that HDR format. PC gamers get even more options. The panel can run at 4K and 180 Hz, and dropping to Full HD can push the refresh rate as high as 330 Hz. There's also a Game Bar that lets you quickly view key info and change gaming-related settings. The only real shortcoming is a proper implementation of HGiG. When enabled, the TV still interferes with HDR brightness mapping, so we don't get the effect intended by that standard. Apart from that, the UR8S is very well equipped for both consoles and a powerful PC.