Blaupunkt UGC5500S vs Hisense A6Q

We won’t beat around the bush here – if you’re looking for a TV strictly for cinematic HDR experiences, then you’ve come to the wrong place. Unfortunately, the Blaupunkt UGC5500S is not a machine built for such challenges. This is primarily due to its very low brightness, which we measured during our tests. A result of around 250 nits on movie screens speaks for itself. It’s simply too little to even consider any real HDR effect. To be honest, everything displayed in this format can confidently be seen as a somewhat “enhanced” SDR mode. We expected this, as practically every device in this price range falls short in this area, but we feel it’s our duty to warn you. Manufacturers love to brag about HDR compatibility on the boxes, but in reality, this format simply doesn’t exist here – it lacks the “fuel” in the form of brightness.

The situation is further complicated for Blaupunkt, as we’re dealing with a panel that has very basic coverage of the DCI-P3 colour gamut, reaching only about 80%. You won’t find any advanced coatings to expand these capabilities (like quantum dots), which means scenes that are supposed to burst with richly saturated colours appear simply underwhelming on this screen. Therefore, we have a particular piece of advice for you: don’t force HDR mode on this model. If you have the option in the streaming app settings – just turn it off. By sticking to the classic SDR mode, you’ll be sure that the TV won’t try to “enhance” something that it can’t handle hardware-wise.

Unfortunately, the Hisense A6Q is hard to recommend for watching HDR content. The main issue remains the low brightness and quite modest coverage of a wide colour gamut. A measured brightness of about 300 nits simply isn't enough for HDR materials to look impressive. In practice, the image often resembles standard SDR rather than true HDR with clear differences in brightness and dynamics. Additionally, colours in such content do not appear as they should. The TV does not utilise additional filters like QLED or PFS LED, and a DCI-P3 coverage of around 80% makes some colours look just too pale. As a result, some scenes in HDR materials lose intensity and spectacle, making it hard to talk about a proper HDR experience.

We also took a close look at how Blaupunkt handles colours in movie mode, and here the matter is, to put it simply, twofold. We must once again clearly separate what we see in the standard SDR format from what happens when HDR is switched on, as they are two completely different worlds. Let's start with the better side of the coin. If you're planning to watch traditional TV, YouTube, or older films on this television, you can count on really well-tuned colours. In our test sample, the white balance in movie mode performed exceptionally well, which honestly surprised us. Of course, to avoid being too rosy, we noticed some drawbacks. Looking at the gamma charts, we observed that the processor struggles with properly dimming the image in its brightest areas. Additionally, there is quite a strong, at times overly aggressive, red saturation, which resulted in visible errors in reproducing certain shades. Despite this, overall, the image in SDR is simply solid and watchable without a grimace on your face. Unfortunately, the magic fades when we re-enter the world of HDR. Here, Blaupunkt behaves as if we suddenly switched it to store mode, and in its worst rendition. The excess blue in the white balance is so significant that it’s glaring, ruining any realism in the scene. Furthermore, the television interprets brightness very loosely, which, upon analysing the EOTF curve, clearly showed that for most of the time, colours simply appear washed out and lacking depth. This is also perfectly evident in the colour errors that become apparent in this mode. Once again, we are left with the same conclusion: Blaupunkt in SDR mode looks significantly better and more natural than in HDR, which seems to be forcefully added without proper refinement.

We conducted the tests in the best available mode, which is Filmmaker, however – as is often the case – this does not mean the image is perfect straight out of the box. In the case of Hisense A6Q, this mode clearly “swallowed” too much blue in everyday SDR content. In practice, this led to an image with yellowed whites, particularly noticeable on large, bright surfaces. This does not result from poor assumptions of the Filmmaker mode itself or from the vision of filmmakers, but from factory settings that require adjustment.
Additionally, looking at the saturation characteristics and gamma curve in SDR, as well as EOTF in HDR content, there is a slight tendency to brighten most scenes. As a result, the image often appears brighter than it should, losing a bit of its naturalness. For this reason, we decided to perform a professional calibration to restore the proper colour balance and a more accurate brightness characteristic.

It may sound like a joke – pulling out professional measuring equipment for a TV that costs around a thousand złoty / 250 dollars, but we wouldn’t be ourselves if we didn’t check it. The question is: does such cheap gear give us any leeway in terms of calibration? To your surprise, the answer is: yes, absolutely. In the Blaupunkt UGC5500S menu, we found surprisingly many options that allowed us to effectively work on the picture. These aren't just empty sliders; these are concrete tools that enabled us to make use of our measurement sensors and software. In SDR mode, the effects were visible to the naked eye. We successfully eliminated the problem we mentioned earlier – that excessive, almost artificial saturation of reds. We also fixed the issue with the incorrect dimming of the brightest parts of the image. After calibration, the picture in standard format became significantly more balanced and simply correct. When it comes to HDR, the situation was more complicated again. While we managed to “tame” that aggressive blue tint in the white balance, it was clear that we were fighting a bit of a losing battle. Even after changing the settings, the TV still tried to interfere with the picture in its own way, as if the electronics knew better than we did how the scene should look. To top it off, there's the hardware barrier that no slider can overcome – colours in HDR still remain undersaturated. This simply results from the quality of the panel itself; it physically cannot produce the most vivid colours. To summarise this point: if any of you ask whether it’s possible to calibrate a TV for “a grand”, we respond with complete conviction: it is possible.

Colours after calibration on the Hisense A6Q need to be evaluated in two ways, as everything depends on the type of content. In the case of SDR materials, the effect is really quite good. In daily programs, series, and movies, it’s hard to find any serious issues with colours. The yellow tint has been effectively removed, and the television has also stopped washing out the entire image. As a result, the ColorChecker test showed errors below a Delta 2 value, which are already outstanding results, allowing for a discussion of very high picture quality in standard content. Unfortunately, the situation looks much worse for HDR materials. Yes, the white balance has been corrected and the EOTF curve has been improved, but the limitations of the panel itself remain insurmountable. The lack of support for a wide colour gamut means that the television still generates quite significant colour errors. Parts of the colours simply cannot be displayed by the screen, making them look less saturated than they should. It’s a pity because even a simple PFS or QLED filter would have resulted in a significantly better end effect. The conclusion is therefore simple – for SDR content, the A6Q after calibration works really very well, while viewing HDR content on it should still be approached with caution.

If you're hoping that the processor in this model will magically "fix" the poor quality signal from your cable TV or old movies from YouTube, we must disappoint you. The capabilities of this television end at absolutely basic upscaling, which is simply stretching the image to a higher resolution. It does this correctly in that the image is not blurry, but there is no mention of any intelligent sharpening or adding details. Worse still, Blaupunkt is completely devoid of any functions to reduce unwanted tonal transitions. If the material being viewed shows what is known as banding (ugly "steps" instead of a smooth transition of colours, e.g., in the sky), this television will display them in all their glory. Additionally, the television has a tendency to slightly crop the edges of the image. Instead of displaying 100% of what the source sends, Blaupunkt slightly zooms in on the frame, causing us to lose details that are at the very edges of the screen. In summary: in the category of digital "enhancement" of the image, Blaupunkt simply performs poorly. We receive a raw, unprocessed signal, with all its flaws.

Upscaling on the Hisense A6Q works really well for a TV in this price range. Lower resolution materials are correctly “upscaled” to higher resolutions, and the image remains clear without any artificial edge sharpening or the typical "over-sharpening" found in cheap models. Unfortunately, the digital processing is significantly poorer. In practice, it’s hard to talk about any advanced artifact smoothing or masking of problematic tonal transitions. In heavily compressed films—especially those from YouTube—the TV struggles with reducing compression blocks and unwanted banding, making the material's imperfections clearly visible. The A6Q scales the image well, but when it comes to digital processing, it leaves the user alone with the source quality.

When it comes to motion fluidity, Blaupunkt has nothing to defend itself with. A 60 Hz panel at this price is standard, so none of us expected a perfectly sharp image in fast action scenes or during a match. However, the biggest drawback of this model is that you won’t find any digital motion smoothers in the menu. The manufacturer hasn’t given us any room for manoeuvre – nothing can be smoothed out or the image adjusted to our personal preferences. The picture is always "raw" and we receive it exactly as it is transmitted by the source. For fans of cinematic "jumping" images, this might be good, but the rest simply has to get used to the lack of any motion enhancement.

The fluidity of motion on the Hisense A6Q is... well, quite average. It's a TV with a native refresh rate of 60 Hz in 4K, which means the movement of objects on the screen doesn't always look perfectly smooth. In dynamic scenes in films or sports, it's evident that this is not the strongest point of this model. The situation looks much better with 1080p content when connecting a console or computer, as the A6Q can then operate at up to 120 Hz. That's a big plus, especially for gamers. However, the sharpness of motion still leaves a lot to be desired, with noticeable ghosting, and the response time of the panel shows that it isn't one of the TV's strong suits.

When it comes to gaming on the Blaupunkt, we weren’t expecting miracles and indeed – the list of features isn’t very long. However, there are two interesting points worth mentioning, as they might be significant for some of you at this price. The first advantage is that the TV quite smoothly detects the connected console. Thanks to the ALLM (Auto Low Latency Mode) feature, the device knows when you start gaming and automatically switches to low latency mode. This is convenient because you don’t have to fiddle with settings every time to ensure input lag doesn’t spoil the fun. The second point is a real curiosity that surprised us. Despite it being a 60 Hz panel, the Blaupunkt can display a 120 Hz image at Full HD resolution. Sure, we lose 4K details, but for those playing more dynamic, online shooters where smoothness is more important than resolution, this is a really nice and unexpected addition in such an affordable device. Other than these two points, you won’t find anything more here. There are no advanced smoothness enhancement systems for gamers or extensive gaming menu bars. It’s a simple screen for occasional gaming.

For such an inexpensive television, the Hisense A6Q really can surprise with what it offers gamers. It operates in 4K only at 60 Hz, but when the game switches to performance mode and drops to 1080p, the panel can work at even 120 Hz. In this price range, that's a big plus, as most titles on consoles don’t deliver a stable 4K at 120 frames. In practice, we are realistically gaming in 1080p, and here the A6Q provides a very enjoyable gaming experience. Additionally, it has a few features that are usually found in more expensive models: ALLM, VRR, and Dolby Vision Gaming for Xbox Series X/S. Everything is gathered in one place, in a simple and convenient Game Bar, so you don't need to dig through the entire menu. For such an affordable piece of equipment, it's really a solid setup for gamers — maybe not for the most demanding, but definitely spot on for occasional gaming.