Blaupunkt UGC5500S Review

We also took a close look at how Blaupunkt handles colors in movie mode, and here the situation is, to put it briefly, twofold. We must clearly separate what we see in the standard SDR format from what happens when HDR is turned on, as these are two completely different worlds. Let’s start with the better side of the coin. If you plan to watch classic television, YouTube, or older movies on this TV, you can count on really well-tuned colors. In our test sample, the white balance in movie mode was exceptionally accurate, which honestly surprised us. Of course, to not make it too rosy, we noticed some flaws. Looking at the gamma charts, we observed that the processor struggles with properly dimming the image in its brightest parts. Additionally, there is quite strong, at times too aggressive, red saturation, which resulted in noticeable errors in reproducing certain shades. Nevertheless, in general terms, the image in SDR is simply solid and watchable without a grimace on your face. Unfortunately, the magic fades when we re-enter the world of HDR. Here, Blaupunkt behaves as if we suddenly switched it to store mode, and in its worst form. The excess blue in the white balance is so overwhelming that it literally clashes with the eyes, ruining any realism of the scene. Furthermore, the TV interprets brightness very loosely, which, when analyzing the EOTF curve, clearly showed that for most of the time the colors appear simply washed out and lacking depth. This is, by the way, perfectly visible in the color errors that become evident in this mode. Once again, we are left with the same conclusion: Blaupunkt in SDR mode looks significantly better and more natural than in HDR, which feels forced and not properly refined.

It may sound like a joke – pulling out professional measurement equipment for a television costing around a thousand zlotys / 250 dollars – but we wouldn't be ourselves if we didn't check it out. The question is: does such cheap equipment give us any room for calibration? To your surprise, the answer is yes, and absolutely so. In the Blaupunkt UGC5500S menu, we found surprisingly many options that allowed us to really work on the picture. These are not just empty sliders; they are concrete tools that enabled us to make use of our measurement sensors and software. In SDR mode, the effects were noticeable to the naked eye. We successfully eliminated the issue we mentioned earlier – that excessive, almost artificial saturation of reds. We also fixed the problem of incorrect dimming of the brightest parts of the image. After calibration, the standard format picture became much more balanced and simply correct. As for HDR, the situation was again more complicated. Although we managed to "tame" that aggressive blue tint in the white balance, it was evident that we were fighting a bit in vain. Even after changing the settings, the television still tried to intervene in the image in its own way, as if the electronics knew better than we did how the scene should look. Additionally, there's a hardware barrier that no slider can overcome – colors in HDR still remain unsaturated. This simply results from the quality of the panel itself; it physically cannot produce the most vibrant colors. To summarize this point: if any of you ask whether it’s possible to calibrate a television for "a thousand," we respond with full conviction: it is possible.