PHILPS PUS9060 vs TCL C6K

The One is bright enough to enjoy movies recorded in HDR format. The average brightness of this model is about 500 nits, so we can count on a pleasant viewing experience for movies from streaming platforms without any issues. Of course, it could always be better, because when it comes to brightness, there is never too much for this type of content. Unfortunately, a disappointing surprise may be the DCI-P3 color gamut coverage offered by the PUS9060. Although the manufacturer boasts about using a QLED filter here (it’s actually PFS LED), it's hard to talk about any positive effects of its operation. 85% DCI-P3 color gamut coverage is definitely not a level to brag about in 2025 – especially in a television advertised as QLED.

TCL C6K is a moderately bright TV that can showcase its full potential under the best cinematic conditions – the maximum brightness is around 600 nits. In scenes with large, intense light sources, the HDR effect can be really satisfying, providing a sense of cinematic brilliance. However, it should be noted that when managing the backlighting zones, there are situations where some elements become dimmed and sometimes can even become barely visible. It is clear that there is a lack of proper algorithm optimization here, although looking at the technical parameters in this price range, the design itself performs very well.

We tested the PUS9060 in the best factory mode it employs – of course, we’re talking about movie mode. Unfortunately, the best in this case doesn’t mean good. The picture in this mode was distinctly yellowed and leaned towards orange tones. The white balance on this TV was definitely too warm, resulting in an artificial, somewhat "sun-kissed" look for the entire scene. This directly translated to significant color errors, which in the worst cases exceeded a delta E value of 6 – thus, they were visible to the naked eye. The situation was the opposite in HDR mode, where the picture became too blue and too cold in appearance. Additionally, there was a slight increase in brightness – the gamma curve and EOTF suggested that the TV slightly brightens the image, which was also evident in the comparison photo below.

This year's TCL televisions feature a Filmmaker mode, and it must be admitted that it is definitely the best choice straight out of the box. This is the mode we recommend for everyday watching of movies and series. Unfortunately, as is often the case, the best doesn't mean perfect. In the case of SDR content, the image was too warm because the red was strongly emphasized in the white balance. On the other hand, with HDR content, we had the opposite impression – the image became cooler than it should have been due to excess blue. Additionally, the brightness characteristic sometimes led to highlights being blown out. In practice, this resulted in quite noticeable color test inaccuracies that are hard to accept in a mode advertised as "by the creators."

Thanks to calibration in movie mode, we managed to completely eliminate the yellow-orange hue, which significantly improved the reception of the entire scene. The image has become much more visually pleasant, although it still falls short of reference settings. It may now appear slightly bluish, but it is still a significant improvement compared to the factory settings.

Unfortunately, we could not significantly improve the brightness characteristics, but that is more about the construction of the TV itself – the lack of local dimming limits the possibilities for precise brightness management. The PUS9060 simply cannot dynamically adjust luminance like more advanced models do. Nonetheless, after calibration, the overall reception is much more enjoyable, especially in film materials.

Thanks to the white balance correction, it was possible to significantly reduce the C6K's tendency to distort colors, which resulted in a very good final outcome. After calibration, we will no longer observe the effect of excessive warming of scenes in SDR or overly cooling the image in HDR. However, it is worth taking a closer look at the brightness characteristics. In SDR content, there are few complaints – the image looks really good, especially in older movies, TV shows, or materials from YouTube. This is much worse for HDR content. Analysis of the EOTF curve suggests that everything is fine, but in practice (EOTF in films), the limitations of the construction become apparent. The TV tends to overly brighten the smallest parts of the frame, and in other situations, it can dim the entire scene too much. The effect of calibration is therefore evident, and in terms of color, the C6K has gained quite a lot, but certain limitations arising from local dimming and, in fact, its management by the C6K simply cannot be overcome.

In the PUS9060, we find the latest version of the image processor called P5 Perfect Picture, which is designed to improve the picture - especially the imperfect ones. The TV features a distortion reduction function, which smooths out tonal transitions, that is, those "color joins" mentioned earlier. And this function does so very effectively - there is no strong color gradation, but unfortunately, it works aggressively enough that it sometimes dims desired elements, such as material textures or film grain. So this can be considered a compromise. We would not recommend using this function for movies, but for more casual content - such as YouTube or regular television - absolutely.

The P5 processor also improves the quality of lower resolution images, and it does this quite effectively. The test image with the model is very soft - sometimes even too much - but this can be easily adjusted with the sharpness slider to match personal preferences. It is also pleasing that the TV does not cut off edges in SD content - which unfortunately still happens in some TV models.

The TCL C6K performs quite well in terms of scaling. Lower quality materials look acceptable, and the lack of overscan issues means that the image is displayed in full, without cropping. However, one cannot expect miracles – content of very low quality will not gain new life here, as the image processor has its limitations. On thin lines or details, the characteristic tearing is visible, which reveals the absence of advanced image enhancement algorithms. It is also a pity that the C6K lacks the feature for smoothing tonal transitions – in older films or video materials, color banding can be noticeable and may be bothersome during long viewing sessions.

PHILIPS PUS9060 is equipped with a 4K display with a 144 Hz refresh rate, so we can confidently say that it is suitable for both watching sports and playing games. And indeed, it is. But what about movies that are most often recorded at 24 frames? Like most of the TVs we tested with a refresh rate of 120 Hz and higher, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in movies – you can set the image to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight “jump” in frame rate (lower settings). Additionally, there is a function called "Motion Blur Reduction," which reduces blurring – and this is a very useful feature, especially when watching sports.

TCL C6K features a 144 Hz panel, which is a significant advantage in this price range. This is an important step forward compared to the previous model C655 PRO, which offered only 60 Hz at 4K. The difference is especially noticeable when watching sports or playing games – the ball, athletes, or fast action in a game are displayed more clearly and without losing details. An interesting fact is also the ability of the panel to operate at 240 Hz, which the manufacturer does not mention in official materials. We will return to this topic when discussing the game mode for PC.

TCL also added a feature for movie watchers: "Motion Clarity," which allows you to adjust the image to your preferences using two simple sliders. You can keep the movie frame visible or opt for a very smooth, almost theatrical effect. This way, everyone can find settings tailored to their taste.

The PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. It features VRR, ALLM, and also includes HGiG implementation, which helps set up HDR in games as the developers intended. The TV supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you’re playing on Xbox, PS5, or a PC, everything works as it should. There is also a simple Game Bar, which is a special menu for gamers that allows you to quickly check if the ALLM mode is indeed functioning in the lowest latency setting.

And of course – Ambilight TV. Let's be honest – without LEDs on the back, it’s not a true gaming device. 😉 The multicolored backlighting can really enhance the atmosphere, especially in the evening. It may not be to everyone's taste, but younger gamers will be thrilled – because it simply looks impressive.

The TCL C6K is a TV that can confidently be called equipment designed for gamers. Here we have 4K at 144 Hz, VRR support, automatic game mode (ALLM), and Dolby Vision Gaming. Additionally, there's a practical Game Bar, a panel with the most important settings readily available – useful when we want to quickly change something during gameplay (e.g., screen aspect ratio: Yes, that’s possible!). The wide VRR range, reaching up to 240 Hz, deserves attention. However, this is mainly an option for PC gamers who drop below the native 4K resolution. Then the TV can spread its wings and show additional smoothness, especially in fast-paced e-sports titles. In the case of consoles, we stick to the classic limit of 120 Hz, but the possibilities are still quite broad. The only drawback is a slight ghosting that can sometimes be seen in dynamic scenes. Other than that, the C6K offers everything gamers expect from a TV.