Philips PUS7009 (IPS) vs Philips PUS8359 (IPS)

In terms of HDR quality, PUS7009 (IPS) performs very poorly. A brightness level of 250 nits does not allow for enjoyment of HDR effects, and the image resembles more of a standard SDR. There is no talk of dynamic effects or vivid bursts of light. The coverage of the DCI-P3 color palette is only 75%, which is definitely insufficient. The lack of full color coverage means that the colors are not as vibrant as they should be, resulting in a flat and unconvincing image. There are no aspects for which this model can be praised in the context of HDR.

The quality of HDR effect on the Philips PUS8359/12 television is also not impressive. A brightness level of 280 nits is too low, resembling standard SDR more than true HDR, which is clearly visible on the five tested images. Additionally, the television does not impress in terms of color gamut coverage – just 76% DCI-P3 is a result that can be considered weak, especially compared to other models in a similar price range.

The television was tested in movie mode, which – despite its name – does not provide correct image display. The white balance in both 4K HDR and HD/SDR content is characterized by drops in red, causing the image to appear cooler and the colors to lose their natural warmth. The gamma brightness characteristic and EOTF curve confirm that the television has issues maintaining adequate brightness – it strongly boosts it, resulting in an unnaturally washed-out image. This effect can be seen in the comparisons below, where the overall look appears as if a milky filter has been applied. Additionally, limited coverage of a wide color gamut also does not favor quality – color checker tests indicate significant color fluctuations, making it difficult to achieve faithful image reproduction.

The "Film" mode turned out to be the most faithful in terms of compliance with the source material used in our tests. However, like other factory modes, it also had its drawbacks. In both SDR and HDR materials, we noticed issues with white balance, where the dominance of green and red resulted in a yellowish tint. This effect was particularly visible in the form of yellowed whites and unnatural skin tones. The "ColourChecker" palette test showed that every color was shifted towards warmer tones, which affected color accuracy. A key aspect of the image is also contrast and brightness, which can be evaluated by analyzing gamma charts and the EOTF curve. On the gamma chart, we observed significant deviations – both too high values causing loss of detail in the shadows and too low values leading to a drastic decrease in contrast. Compared to gamma, the EOTF curve performed better, only slightly brightening the image, which had a less negative impact on overall quality.

After calibration, the image has significantly improved, especially in terms of white balance, which is now more stable, and the hues have acquired a natural quality, eliminating the previous impression of being too cool. The calibration has brought noticeable benefits in terms of tonality – shadows and midtones are now more realistic, and the overall image appears more harmonious. Unfortunately, hardware limitations still affect image quality. The brightness characteristics remain problematic, despite our efforts, and due to poor coverage of the DCI-P3 and BT.2020 color palettes, delta E errors are still at a high level. Although calibration improved some aspects, the television still does not allow for complete satisfaction.

Philips, both in its cheaper and more expensive models, offers a wide range of tools for image calibration. We used them to improve the quality of the displayed image, although it was not as simple as it might seem. We managed to adjust the white balance, improve the gamma, and tune the EOTF curve; however, despite these actions, the deltaE errors were still at a very high level. The main causes are limited coverage of the DCI-P3 color palette and low maximum brightness, which significantly affected the final result. Although the overall presentation looks much better, the design features of the TV did not allow us to achieve spectacular results.

When it comes to tonal transitions in low-quality material, the function called "Distortion Reduction" (setting "minimum") effectively improves grading, eliminating ugly tonal transitions. However, this setting on Philips televisions is quite aggressive – while it does not blur grain or high-quality material, it can introduce unwanted effects and blur elements that should remain sharp with a poorer signal.

In terms of image scaling, Philips PUS7009 performs decently. A significant advantage is the lack of cropped image edges, meaning no overscan, which allows for displaying the full frame without loss. The image is noticeably improved, making characters and backgrounds, such as the model or branches in the background, look quite detailed and natural, even with lower quality signals. Although scaling is not perfect, as it can remove desired details in the distance, the results are good enough for most users to be satisfied.

In this paragraph, we will look at two functionalities. We will once again take a look at the function responsible for tonal transitions, but we will also check how the television handles image scaling. The option responsible for smooth gradation is the one called "Distortion Reduction." As we established, it quite effectively smooths out the choppiness. However, we must point out two things: we cannot enable it for HDR materials and that it blurs details in films. The tested television cannot boast the best image scaling. There is a noticeable overall blurriness of the image, but, worse, it blurs details. This is particularly visible on the branches and the hair of the model. A characteristic white halo around the character is also noticeable.

Philips PUS7009 does not have any motion smoothing feature for movies, which means we cannot choose whether the picture should be more stuttery or more cinematic. These features could improve more dynamic scenes. As for motion blur, despite using a 60Hz IPS panel, the situation looks quite good. The response time between pixels is better than in VA panel versions, which means that motion blur remains at an acceptable level and does not significantly affect the viewing comfort of dynamic scenes.

Philips PUS8359 is not the best choice for watching sports. The lack of even basic motion enhancement features means that the picture in dynamic scenes is not suitably clear. Despite using an IPS panel (43 and 55'), which theoretically should offer better sharpness than VA panel variants, there is no noticeable improvement in terms of motion blur. In fast-moving images, it is clear that the UFO character is distinctly blurred, which indicates that the television does not cope well with maintaining sharpness in dynamic shots.

In terms of compatibility with consoles, Philips PUS7009 is suitable for casual gamers. Despite using HDMI 2.0, the TV offers access to features such as ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), and Game Bar. ALLM automatically switches the TV to low latency mode, allowing for faster response during gameplay, while VRR dynamically adjusts the refresh rate to reduce screen tearing. Game Bar is a tool that provides quick access to game settings and real-time monitoring of parameters - though we believe it appears weaker compared to competing Game Bars.

Unfortunately, more demanding gamers may be disappointed. Philips PUS7009 does not support advanced HDR formats in games or high refresh rates, due to the use of a 60 Hz panel. The lack of support for these features limits the TV's ability to deliver smooth and fully detailed experiences during fast-paced gameplay.

In terms of compatibility with consoles, the Philips PUS8359 is mainly suitable for casual gamers. Although the TV is equipped with an HDMI 2.0 port, it offers features such as Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR), and Game Bar. ALLM automatically switches the TV to low latency mode, facilitating quicker reactions during gameplay, while VRR smoothly adjusts the refresh rate, eliminating the issue of screen tearing. Game Bar provides quick access to game settings and real-time monitoring of parameters; however, in our opinion, it performs worse compared to competitors' solutions.

However, more demanding gamers may feel underwhelmed. The Philips PUS8359 does not support advanced HDR formats in games or higher refresh rates, which is due to the use of a 60 Hz panel. These shortcomings limit the TV's capabilities in delivering smooth and detailed experiences during fast-paced, dynamic gameplay.