Philips PML9009 / 9019 / 9059 vs XIAOMI A PRO 2025

The Philips PML9009 struggles to deliver the highest HDR performance. Scenes with effects around 550 nits don’t provide particularly impressive lighting, though the effects remain stable, an improvement over SDR materials. A notable exception is in Gemini Man, where a flashlight as the sole light source stands out. This is likely due to the absence of large dark areas and the relatively small size of the light source compared to scenes with larger, brighter elements like the sun. While the brightness results in HDR content aren’t quite strong enough to recommend this TV for productions utilising a wide colour gamut, it’s worth mentioning that the model does achieve decent coverage, reaching 93% of the DCI-P3 spectrum.

In the HDR category, the Xiaomi A Pro performs poorly overall. Under ideal conditions, it achieves a brightness level of around 250 nits, which is underwhelming. However, many competing models offer similar or even lower brightness levels. Such limited brightness is insufficient to fully showcase the potential of HDR content. In practical terms, the image lacks the depth and intensity expected from high-quality HDR. Instead, the visuals resemble standard dynamic range (SDR), with scenes that should display striking brightness and contrast appearing flat and uninspiring. That said, for its price, the television offers solid DCI-P3 colour gamut coverage at 92%, made possible by its quantum dot (QLED) technology. This ensures vibrant and saturated colours, making it an appealing choice for gamers and movie enthusiasts seeking richer hues and improved colour reproduction compared to standard models.

During testing, the Philips PML9009 performed best in the factory "Filmmaker" mode, which we evaluated across both SDR and HDR content. A key characteristic observed in this mode is the EOTF curve’s behaviour in HDR content and gamma settings in SDR, designed to enhance image accuracy. However, the PML9009 presented noticeable issues, particularly with white balance, as a pronounced red dominance created a yellow tint across the entire image. This affected skin tones and white areas, with faces and whites appearing unnaturally warm. The colour shift was confirmed through the "ColourChecker" palette, where colours leaned towards warmer shades.

In the gamma analysis, responsible for image contrast, we noticed considerable inaccuracies early on. Our measured values spiked above the reference, causing dark scenes to lose detail and merge visually up to about 10% screen brightness. Following this, the values dropped below the target line, further degrading contrast—an area already challenging for this model.

In HDR content, the white balance remained similarly flawed, and the EOTF curve also restricted brightness levels, resulting in a dim, muted image. Colour inaccuracies were even more pronounced here, with lower luminance levels causing large deviations from accurate colours, which were clearly visible on the error graph, often exceeding acceptable limits. While aiming for cinematic quality, this mode ultimately fell short in delivering balanced colour and contrast fidelity.

The Xiaomi A Pro 2025 performs best in movie mode for colour reproduction straight out of the box, though it is not without its flaws. An analysis of the white balance shows negative green values, causing distortions in white tones. At full white, there are noticeable deviations, and the high-contrast image leads to poor tonal transitions in red, negatively impacting the overall colour quality. Before calibration, the image often displays a pink hue in its scenery.

The gamma contrast graph falls below the 2.4 mark, indicating an overemphasis on darker tones and a lack of prominence in lighter areas. Additionally, the EOTF curve shows a sharp rise early on, which can result in lost detail in bright scenes and an oversaturated appearance. These issues suggest that further calibration is needed to balance the colour reproduction and enhance the overall image.

Factory colour settings on the Xiaomi A Pro 2025 are average, and while this is common in televisions of its class, users seeking accurate colour representation may need to adjust the settings. After proper calibration, the TV delivers a more natural and vibrant palette, aligning better with cinematic standards. For those prioritising precise colour reproduction, professional calibration will significantly improve image quality.

Philips has long provided sophisticated calibration tools, including 2-point and 20-point grayscale adjustments as well as an advanced CMS (Colour Management System). These allow users to make significant improvements, and even those less attentive to image quality will likely notice a positive difference post-calibration. Both SDR and HDR content benefit from this process, notably eliminating the prominent yellow tint caused by an overemphasis on red in the white balance.

For SDR content, although gamma adjustments don’t entirely resolve the loss of detail in dark areas, the overall improvements bring most content to an impressive standard, with minimal, hardly perceptible errors. Colour accuracy is notably enhanced, achieving nearly reference quality with low deltaE errors.

HDR content, however, remains somewhat limited due to the display’s lower brightness capability. While the white balance has largely been corrected, a slight blue tint can occasionally appear. The EOTF curve aligns very well, providing accurate geometry, though colour errors persist due to the limited luminance. This calibration offers a substantial improvement but may still fall short for viewers who expect high brightness levels in HDR.

After calibration, the Xiaomi A Pro 2025 TV shows significant improvement. The white balance is the most noticeable change, with previous errors corrected in HD and 4K content. Most deviations are now minimal, falling within an acceptable range, resulting in a more balanced and natural colour representation that enhances viewing comfort.

In terms of gamma, the drop has been largely addressed, leading to a more consistent rendering of tones across various scenes. However, the EOTF curve still hasn't seen substantial improvement, as there is limited control over dynamic tone mapping. This limitation means that some details may still be lost in bright scenes, affecting the perception of certain materials.

Despite these minor issues, the overall picture quality is improved after calibration. The enhanced white balance and reduced gamma issues provide a more realistic and enjoyable viewing experience. While further adjustments could enhance the image even more, the TV now showcases its potential, meeting the expectations of many users.

Given the impressive handling of tonal transitions by the Philips PML9009, one might expect similar success in the image scaling test. However, the results were less than stellar. When upscaling lower-quality images, like those from certain TV programmes or older films, the Philips algorithm tended to blur fine details noticeably, especially in intricate elements like fine branches or a model's hair.

On the other hand, the tonal transition performance remains noteworthy, with the TV offering several levels of smoothing. Even at the lowest setting, it effectively addresses non-smooth transitions in most materials, and crucially, it preserves the film grain effect, maintaining fidelity to the director's vision. However, it’s worth noting that some fine details may still appear slightly softened.

The Xiaomi A Pro 2025 handles tonal transitions effectively, especially when dealing with lower-quality materials. Thanks to its advanced digital processing, the colour contour removal feature performs surprisingly well. Setting this option to "Medium" provides the best balance, enhancing the smoothness of tonal transitions while avoiding excessive smoothing of other image elements, like film grain.

In the case of a tested frame featuring a model with numerous branches in the background, the TV demonstrated its digital processing strengths. Adding artificial sharpness clarified the model’s details, particularly enhancing the hair's definition. However, around the branches, subtle contours emerged due to digital intervention. While this adds detail to the overall image, excessive sharpness can sometimes cause certain elements to appear unnaturally highlighted.

The Philips PML9009 has a 120 Hz native refresh rate, a baseline standard for watching sports and an ideal setting for gaming on consoles or PCs. Philips includes an effective motion-enhancement system for users who want to reduce the stutter of 24 fps content or need fluid motion for fast-paced scenes, like in football matches. The dedicated "Smoothness" slider effectively mitigates stuttering, while "Motion Blur Reduction" enhances the sharpness of dynamic content. Each setting produces a noticeable difference, so users can tailor the motion effects to their preferences. Our recommended setup achieves a moderate smoothing effect, avoiding the exaggerated “soap opera” appearance.

Regarding pixel response time, VA panels like this generally fall short compared to OLED or even IPS panels, which can lead to a slight "black halo" trailing behind fast-moving objects. Although not a frequent issue with this TV, the effect can be seen in certain scenes.

The Xiaomi A Pro 2025 features a motion smoothing option known as "Motion Smoothing," which is designed mainly for film viewing. It allows users to adjust the effect to either a more cinematic, film-like appearance with visible frames or a smoother, theatrical image. This feature will likely satisfy movie lovers. However, gamers and sports enthusiasts might be disappointed. The TV uses a 60 Hz refresh rate panel, typical for this price range, which doesn’t offer exceptional motion handling. Our "Ufo" test revealed some motion blur, so those seeking sharper moving images may find it lacking in this regard.

The Philips PML9009, with HDMI 2.1 ports supporting full bandwidth, is thoroughly equipped with gamer-focused features. Core functions like Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) are included, as well as the additional perks of G-Sync and FreeSync compatibility and low-lag HDR Dolby Vision support. All these gaming features activate seamlessly, proving this model’s suitability for gaming. The TV’s HGIG mode, particularly beneficial for gaming, adjusts HDR effects to the television’s capabilities to avoid image dimming and blooming, an advantage given the still limited number of games supporting Dolby Vision.

For added convenience, the PML9009 has a GameBar menu, allowing in-game setting adjustments without needing to exit. This menu includes features like a crosshair option and black level correction, which can enhance the visibility of shadowed areas—ideal for competitive play.

Overall, the Philips PML9009 offers a comprehensive setup for gamers, supporting VRR, ALLM, G-Sync, FreeSync, and HDR Dolby Vision to deliver immersive, high-quality gaming experiences across a wide range of titles.

The Xiaomi A Pro 2025 includes several gamer-friendly features, such as the Game Bar, which sets itself apart from the typical dashboards seen in other brands. This feature allows quick access to game-related settings, making it convenient during intense gaming sessions. The TV also supports Automatic Low Latency Mode (ALLM), automatically switching to a game-optimised mode to reduce signal delays. However, it lacks HDMI 2.1 support, limiting compatibility with the latest gaming consoles that require higher bandwidth. Additionally, it does not support features like VRR (Variable Refresh Rate) or G-Sync, which are becoming essential for gamers seeking smoother visuals and reduced tearing. While the Xiaomi A Pro 2025 has some useful features, there are better options in this price range offering more advanced gaming solutions.