Philips PML9009 / 9019 / 9059 vs Philips OLED769

The Philips PML9009 struggles to deliver the highest HDR performance. Scenes with effects around 550 nits don’t provide particularly impressive lighting, though the effects remain stable, an improvement over SDR materials. A notable exception is in Gemini Man, where a flashlight as the sole light source stands out. This is likely due to the absence of large dark areas and the relatively small size of the light source compared to scenes with larger, brighter elements like the sun. While the brightness results in HDR content aren’t quite strong enough to recommend this TV for productions utilising a wide colour gamut, it’s worth mentioning that the model does achieve decent coverage, reaching 93% of the DCI-P3 spectrum.

The Philips OLED769 performs admirably in film scenes featuring small bright elements. With peak brightness reaching around 800 nits, the TV handles light sources like street lamps or stars with remarkable vividness and detail. However, its limitations become evident during scenes with full-screen brightness, such as sun glare, where brightness drops to approximately 250 nits. This is a common challenge for more affordable OLED models, which often struggle to sustain high brightness across the entire display.

During testing, the Philips PML9009 performed best in the factory "Filmmaker" mode, which we evaluated across both SDR and HDR content. A key characteristic observed in this mode is the EOTF curve’s behaviour in HDR content and gamma settings in SDR, designed to enhance image accuracy. However, the PML9009 presented noticeable issues, particularly with white balance, as a pronounced red dominance created a yellow tint across the entire image. This affected skin tones and white areas, with faces and whites appearing unnaturally warm. The colour shift was confirmed through the "ColourChecker" palette, where colours leaned towards warmer shades.

In the gamma analysis, responsible for image contrast, we noticed considerable inaccuracies early on. Our measured values spiked above the reference, causing dark scenes to lose detail and merge visually up to about 10% screen brightness. Following this, the values dropped below the target line, further degrading contrast—an area already challenging for this model.

In HDR content, the white balance remained similarly flawed, and the EOTF curve also restricted brightness levels, resulting in a dim, muted image. Colour inaccuracies were even more pronounced here, with lower luminance levels causing large deviations from accurate colours, which were clearly visible on the error graph, often exceeding acceptable limits. While aiming for cinematic quality, this mode ultimately fell short in delivering balanced colour and contrast fidelity.

The "Film" mode on the Philips OLED769 proved to be the most faithful factory setting for preserving the source material, and it was the basis for our tests. However, like other factory presets, it has a few flaws. Let’s break down the key issues observed in SDR and HDR content.

In both formats, the white balance exhibited a noticeable dominance of green and red tones. This led to a yellowish tint across the image, resulting in yellowed whites and slightly unnatural skin tones. This was particularly evident in the "ColourChecker" palette, where colour samples leaned toward warmer shades.

In terms of contrast and brightness, two critical graphs tell the story: the Gamma curve for HD content and the EOTF curve for 4K HDR content. For SDR, the gamma value dips below the ideal 2.4 level, causing lighter parts of the image to appear overly bright. This overexposure reduces detail and depth in bright areas. In contrast, the EOTF curve for HDR content performed admirably, accurately maintaining details in both bright and dark regions. This ensures realistic, dynamic scene reproduction that enhances the overall viewing experience.

Philips has long provided sophisticated calibration tools, including 2-point and 20-point grayscale adjustments as well as an advanced CMS (Colour Management System). These allow users to make significant improvements, and even those less attentive to image quality will likely notice a positive difference post-calibration. Both SDR and HDR content benefit from this process, notably eliminating the prominent yellow tint caused by an overemphasis on red in the white balance.

For SDR content, although gamma adjustments don’t entirely resolve the loss of detail in dark areas, the overall improvements bring most content to an impressive standard, with minimal, hardly perceptible errors. Colour accuracy is notably enhanced, achieving nearly reference quality with low deltaE errors.

HDR content, however, remains somewhat limited due to the display’s lower brightness capability. While the white balance has largely been corrected, a slight blue tint can occasionally appear. The EOTF curve aligns very well, providing accurate geometry, though colour errors persist due to the limited luminance. This calibration offers a substantial improvement but may still fall short for viewers who expect high brightness levels in HDR.

After professional calibration, the Philips OLED769 truly excels in colour accuracy. Any yellow tint previously seen in HD and 4K content is now eliminated. The Colour Checker test shows minimal deltaE errors, occasionally exceeding a value of 2, which indicates a nearly perfect representation of the director's intent.

When it comes to contrast, the results are equally impressive. For 4K materials, there was little room for improvement initially, but the gamma curve has been significantly refined. This leads to a more accurate rendering of dark and bright areas, resulting in a dynamic and realistic viewing experience.

Thanks to the calibration, the full potential of the television has been unlocked. The Philips OLED769 now delivers vibrant, natural, and high-quality images, making it an excellent choice for movie lovers and multimedia users.

Given the impressive handling of tonal transitions by the Philips PML9009, one might expect similar success in the image scaling test. However, the results were less than stellar. When upscaling lower-quality images, like those from certain TV programmes or older films, the Philips algorithm tended to blur fine details noticeably, especially in intricate elements like fine branches or a model's hair.

On the other hand, the tonal transition performance remains noteworthy, with the TV offering several levels of smoothing. Even at the lowest setting, it effectively addresses non-smooth transitions in most materials, and crucially, it preserves the film grain effect, maintaining fidelity to the director's vision. However, it’s worth noting that some fine details may still appear slightly softened.

When it comes to lower-quality materials, the distortion reduction in the Philips OLED769 does well in smoothing tonal transitions, especially at the minimum setting. It's worth noting that film grain is not blurred, which is a positive surprise, as such negative phenomena often occur with other manufacturers. Overall, this is quite a decent solution. However, it should be pointed out that this setting does not work in HDR mode, where gradation issues are much more pronounced. In HDR mode, the TV struggles with smoothing tonal transitions and may exhibit more noticeable distortions and noise, reducing image quality in dynamic scenes.

As for digital processing, the Philips OLED769 performs well. The model in the photo is not overly jagged, and the branches in the background lack characteristic jagged edges. The TV achieves this effect thanks to the absence of artificial sharpness, which may be an advantage for some users. However, others may find this less attractive as they prefer a more pronounced, sharper image instead of a subtle effect. This effect can be mitigated using a higher setting for the "Sharpness" parameter.

The Philips PML9009 has a 120 Hz native refresh rate, a baseline standard for watching sports and an ideal setting for gaming on consoles or PCs. Philips includes an effective motion-enhancement system for users who want to reduce the stutter of 24 fps content or need fluid motion for fast-paced scenes, like in football matches. The dedicated "Smoothness" slider effectively mitigates stuttering, while "Motion Blur Reduction" enhances the sharpness of dynamic content. Each setting produces a noticeable difference, so users can tailor the motion effects to their preferences. Our recommended setup achieves a moderate smoothing effect, avoiding the exaggerated “soap opera” appearance.

Regarding pixel response time, VA panels like this generally fall short compared to OLED or even IPS panels, which can lead to a slight "black halo" trailing behind fast-moving objects. Although not a frequent issue with this TV, the effect can be seen in certain scenes.

The Philips OLED769 features a multi-stage motion smoother called "Motion Style," which will satisfy users who value the ability to customize motion fluidity in movies. Thanks to this function, the image can be set to be more frame-like or fluid, resembling a theatrical effect. This is a great solution for those who want to match the displayed content to their visual preferences. Gamers will also be pleased, as the TV, like most OLEDs, is equipped with a 120Hz panel. This provides extraordinary fluidity and image dynamics. Unfortunately, the Philips OLED769 lacks BFI (Black Frame Insertion) functionality, which could further improve motion fluidity and sharpness. Despite this limitation, it offers excellent visual experiences for cinema and gaming enthusiasts, one of its main strengths.

The Philips PML9009, with HDMI 2.1 ports supporting full bandwidth, is thoroughly equipped with gamer-focused features. Core functions like Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) are included, as well as the additional perks of G-Sync and FreeSync compatibility and low-lag HDR Dolby Vision support. All these gaming features activate seamlessly, proving this model’s suitability for gaming. The TV’s HGIG mode, particularly beneficial for gaming, adjusts HDR effects to the television’s capabilities to avoid image dimming and blooming, an advantage given the still limited number of games supporting Dolby Vision.

For added convenience, the PML9009 has a GameBar menu, allowing in-game setting adjustments without needing to exit. This menu includes features like a crosshair option and black level correction, which can enhance the visibility of shadowed areas—ideal for competitive play.

Overall, the Philips PML9009 offers a comprehensive setup for gamers, supporting VRR, ALLM, G-Sync, FreeSync, and HDR Dolby Vision to deliver immersive, high-quality gaming experiences across a wide range of titles.

The Philips OLED769 was created with gamers in mind, offering full compatibility with consoles and the highest-quality gameplay. The television received the maximum rating in this category, providing everything one could desire. With HDMI 2.1 ports fully supporting ALLM (Auto Low Latency Mode) and VRR (Variable Refresh Rate), the television ensures smooth and hassle-free gaming. ALLM automatically switches the TV to low latency mode, and VRR eliminates stuttering and screen tearing, resulting in fluidity and stability in gameplay. The Dolby Vision feature for gamers is another advantage, though it only works at 60 Hz. Most casual gamers are unlikely to feel the lack of a higher frequency, but more demanding users may have some reservations. This allows for enjoying a dynamic range of tones and realistic images, enhancing the gaming experience. PC gamers will also not be disappointed, as the Philips OLED769 offers full compatibility with Nvidia graphics cards, thanks to support for G-Sync. This technology synchronizes the TV's refresh rate with the graphics card, eliminating tearing and stuttering, translating to excellent image smoothness.

The Philips OLED769 is a television that perfectly meets the needs of gamers, offering a wide range of advanced features and technologies that significantly improve game quality and user comfort.