Philips PUS8359 (VA) vs Philips PUS8500

Philips PUS8359 did not impress us with its results in HDR materials. This model is capable of generating a maximum brightness of 320 nits, and often even less. Such results, combined with a lack of support for HDR Dolby Vision, mean that the image will be significantly darker compared to the source material. Therefore, playing SDR materials will be more beneficial for this television. This is also suggested by the rather low coverage of the DCI-P3 colour gamut at 83%, which results in significant colour deficiencies. The fact remains that the television supports the HDR format based on dynamic metadata, although HDR10+ is such a niche format that it does not bring any significant advantages.

When it comes to the HDR effect on the PUS8560, it can fairly confidently be stated that it is very average. The panel brightness is around 350 nits, which we consider to be the absolute minimum for watching content in this format. However, this is not a result that will astonish a viewer searching for the best possible picture.

On the plus side, it is worth noting that the PUS8500 series – including the PUS8560/12 we tested – is advertised as a QLED television. And indeed, we can expect a wider colour spectrum here. This model is equipped with an additional filter (PFS), and a DCI-P3 colour coverage of around 90% should suffice for the majority of users. This filter works very similarly to quantum dots. As a result, the colours are quite well saturated. It is not an outstanding result, but it is entirely sufficient for watching films and series from streaming platforms.

The best factory mode in terms of fidelity to the source material was "Film". This was the mode we used during our tests. Just like each of the factory modes in televisions, it had its shortcomings. We will check what exactly was wrong in both SDR and HDR materials. In both cases, the white balance showed excessive dominance of the green and red colour combination. This created a yellow tint that spread across the entire image, causing issues such as yellowed whites and problems with skin tones. This situation was perfectly illustrated on the "ColourChecker" palette, where each of the tested samples was pushed into its warmer counterparts. The foundation of the image is primarily contrast and black. These are represented by gamma charts and the EOTF curve. Looking at the first one, we can see a true rollercoaster, as we can observe both an elevated and a lowered gamma. The heavily elevated gamma caused visibility issues in blacks, while the lowered gamma led to a dramatic drop in contrast. In this context, the EOTF curve performed significantly better, only slightly brightening the image.

We tested the television with the best available factory settings, namely in Film/Filmmaker mode – this is the mode we recommend for everyday viewing. Unfortunately, it is not without its flaws. Both in HD and HDR content, the image had a noticeable tendency to a pink tint, caused by an excessive amount of red and blue in the white balance. Another issue turned out to be excessive brightness in the image, which was confirmed by both the gamma chart and the EOTF curve. This feature was responsible for loss of detail and washed-out colours in more challenging HDR scenes that we mentioned earlier. The overall result led to significant colour reproduction errors – in extreme cases, the delta E value exceeded 7, while the threshold for visible errors for the human eye is around 3. This situation can be improved with calibration, and you can read about its effects below.

Philips offers a wide range of image calibration tools in both its more expensive and cheaper models. We utilised these tools and got to work, which was not as easy as many of you might think. While we were able to model the white balance, significantly improve the gamma, and refine the EOTF curve in both cases, the deltaE errors remained extremely high. There are several reasons for this situation, which are directly related to the low coverage of the DCI-P3 palette and the maximum brightness of the unit in HDR materials.

The Dutch manufacturer offers quite a sizable amount of settings in its products, so as usual, we decided to tinker with them a bit. The effects are immediately noticeable – we managed to correct the white balance, which made the image stop appearing excessively pink. The brightness characteristic has also been partially evened out, of course, within the limits set by the television itself. The image is no longer overly exaggerated, and the overall reception after calibration is definitely better than in the factory settings of the Filmmaker mode.

One could only critique the EOTF curve characteristic, which still indicates that the image has a tendency to brighten HDR materials. Despite our efforts, the darkest parts of scenes are still sometimes too bright, and the brightest ones do not always achieve their full contrast potential. However, it must be clearly stated that we are dealing with a typically budget construction – one cannot expect reference-level reproduction of HDR content from it.

Calibration has definitely helped this model – it improved the balance, toned down the aggressive colour palette, and brought the image closer to what one might expect from a well-configured movie mode. However, there are certain limitations that cannot be overcome.

In this paragraph, we will take a look at two functionalities. We will once again examine the feature responsible for tonal transitions, but we will also check how the television performs with image scaling. The option responsible for smooth gradation is called "Distortion Reduction". As we have established, it quite effectively smooths out the inconsistencies. However, we must point out two things: we cannot enable it for HDR materials and that it blurs details in films.

The tested television cannot boast of the best image scaling. There is a noticeable overall blurriness of the image, but worse still, it blurs details. This is particularly evident on the branches and the model's hair. A characteristic white halo around the character is also visible.

Philips PUS8560 offers a function for reducing posterization, hidden under the name "distortion reduction". And although it indeed fulfills its role by smoothing out problematic tonal transitions, it works a bit too broadly. In practice, it affects not only colourful gradients but also softens faces, the textures of clothing, and the surfaces of furniture. This compromises the authenticity of the image – especially in films where natural texture is very important. However, if someone is looking for smoothing at all costs, it's best to set this option to "Low". For cinema image enthusiasts – we definitely do not recommend it.

On the positive side, the quality of upscaling older materials is noteworthy – the PUS8560 model handles them surprisingly well. The image retains its natural softness, without artificially boosted sharpness. It is also worth mentioning that the television correctly displays content with very low resolution, avoiding issues with image edge cutting (so-called overscan).

Philips PUS8359 will not be the best television for sports. The reason for this is the lack of implementation of even the basic motion smoothing feature, which was to be expected given the price of the device. We also note that we are dealing with a VA panel, whose sharpness is not of the highest standard. This type of panel is mainly associated with high contrast, which goes hand in hand with quite a slow response time, as clearly indicated by the matrix analysis results. As you can see from the images captured in rapid motion, the picture is typically blurred for this type of panel. Although it may not be the ideal option, it can be used conditionally for watching sports; however, one must keep in mind the less than optimal sharpness in motion. It is worth mentioning that films will exhibit judder, as the television does not have any motion smoother, even the simplest one.

The Philips PUS8560 is a television equipped with a panel featuring a refresh rate of 60 Hz, which immediately limits its capabilities in terms of displaying dynamic content. Watching sports or playing on a console is not particularly enjoyable. The situation is further worsened by the lack of any option to improve the smoothness of films. In the menu, we won't find settings that would allow us to enable a motion smoother or even a slight motion smoothing for films recorded at 24 frames per second. You can imagine the effect. The image can appear jerky, especially in shots with panoramic camera movements.

It will not be a surprise if we write that Philips PUS8359/12 only offers the most basic support for consoles. Once the console is connected, we can count on features such as: VRR and ALLM. This is quite pleasing in the case of the former, as experience has shown that even in more expensive units there can be issues with this. A nice touch is the implementation of a special GameBar that allows for changing settings on the "fly," so we won't have to exit the game and unnecessarily distract ourselves. This feature also allows for adapting gameplay to the needs of people with disabilities, which will certainly be extremely useful.

Although the Philips PUS8560 is not designed with gamers in mind, the manufacturer has decided to equip it with a few features that may prove useful when connecting a console. On board, we find automatic switching to game mode (ALLM), as well as a simple connection status information bar – the so-called Game Bar. It does not make a particularly strong visual impression, but it serves its purpose. The presence of variable refresh rate (VRR), operating in the range of 48 to 60 Hz, may come as a surprise. While this is not a wide range, in the case of less demanding games or titles with unstable frame rates, VRR can help reduce screen tearing. However, this is the only element that could be considered beyond the minimum.

It must be made clear that the PUS8560 is not equipment for gamers looking for a responsive screen and full support for modern console features. It lacks HDMI 2.1 ports, the refresh rate is limited to 60 Hz, and the response time of the panel is not among the fastest. This model may be suitable at most for casual gamers who want to enjoy the Ambilight system.