Philips PUS8359 (IPS) vs Hisense S7NQ CanvasTV

The quality of the HDR effect on the Philips PUS8359/12 TV is also not impressive. The brightness level of 280 nits is too low, resembling standard SDR more than true HDR, which is clearly visible on the five tested test patterns. Additionally, the television does not excel in terms of colour gamut coverage – a mere 76% of DCI-P3 is a result that can be considered poor, especially compared to other models in a similar price range.

When it comes to the brightness of the television and how it handles bright elements while watching films, it is simply average – similar to the case with contrast. The average brightness level of the Hisense S7NQ is around 500 nits. This is a value that allows one to feel the beginnings of true HDR, but it is definitely too little to speak of remarkable effects. However, the television should be praised for its colour gamut coverage – films look very colourful and vibrant. Thanks to the use of PFS LED (QLED) coating, the device is capable of covering over 90% of the DCI-P3 colour palette and over 72% of the wider BT.2020 palette. For a television of this class – these are really very good results.

The most faithful factory mode in terms of compliance with the source material turned out to be "Film", which was used in our tests. Nevertheless, like other factory modes, it also had its flaws. In both SDR and HDR materials, we noticed issues with white balance, where the dominance of green and red resulted in a yellowish tint. This effect was particularly noticeable in the form of yellowed whites and unnatural skin tones. The "ColourChecker" palette test showed that every colour had shifted to warmer tones, affecting colour reproduction accuracy. A key aspect of the image is also contrast and brightness, which can be assessed by analysing gamma charts and the EOTF curve. On the gamma chart, we noticed significant deviations – both excessively high values, which caused loss of detail in the shadows, and excessively low values, which led to a drastic drop in contrast. Compared to gamma, the EOTF curve performed better, only slightly brightening the image, which had a less negative impact on overall quality.

Let's now check how the Hisense S7NQ CanvasTV performs in colour reproduction in the best factory mode, which is Filmmaker. Right from the start, it is clear that it is decidedly better than in dynamic or standard modes, but there are still a few things to nitpick. Regarding image quality from an HD signal, the colours are slightly inaccurate – there is a dominance of cooler shades of blue and a lack of red. This makes the image appear somewhat too cool.

A similar effect can also be observed with 4K content, but there it is much more noticeable. The excessive exposure of blue tones and the lack of red result in the image appearing distinctly cold. However, the biggest problem with this television is not the colours themselves but the way brightness is managed. The tested unit slightly boosted brightness compared to the reference value. While this results in better visibility of details, it comes at the cost of significantly brightened blacks – causing the entire image to seem more "flat".

A similar phenomenon was noticed in the 4K signal – the slightly elevated curve at the beginning of the EOTF chart shows that the television has a tendency to overexpose certain scenes. Fortunately, this effect can be improved with professional calibration, which we will discuss in the next point.

Philips, both in its cheaper and more expensive models, offers a wide range of tools for image calibration. We used them to improve the quality of the displayed image, although it was not as straightforward as it might seem. We managed to adjust the white balance, improve the gamma, and fine-tune the EOTF curve, but despite these efforts, the deltaE errors were still at a very high level. The main causes were limited coverage of the DCI-P3 palette and low maximum brightness, which significantly affected the final result. Although the overall presentation is much better, the design features of the television did not allow us to achieve spectacular results.

The results we achieved after calibrating the Hisense S7NQ are really very good. Thanks to the calibration, we managed to eliminate the excessive exposure of blue tones and deficiencies in red with HD signal. A similar, albeit slightly weaker effect was also achieved with 4K HDR content. Managing brightness in HD material has also been improved – the television no longer has issues with brightening the image "across the board."

However, there are things that cannot be bypassed. The characteristic of the EOTF curve has practically not changed, and the lack of local dimming means that the smallest elements on the screen will always be slightly overexposed. One simply has to come to terms with this when choosing a television with a similar type of backlighting. Despite this, the final effect is very good and should fully satisfy the vast majority of users.

In this paragraph, we will take a look at two functionalities. Once again, we will examine the feature responsible for tonal transitions, but we will also check how the television handles image scaling. The option responsible for smooth gradation is called "Distortion Reduction". As we have established, it quite effectively smooths out irregularities. However, we must point out two things: we are unable to enable it for HDR materials, and that it blurs details in films.

The tested television cannot boast the best image scaling. The overall blurriness of the image is quite noticeable, but worse still, it blurs details. This is particularly evident on the branches and the model's hair. A characteristic white halo around the figures is also visible.

Equally important is how the television handles tonal transitions on a poor signal – for example, in older films, television, or on YouTube. Unfortunately, despite the presence of the "Smooth and Gradient Picture" feature, which was supposedly meant to improve this aspect, its performance is truly poor. It's barely noticeable that it has any real impact on the visibility of colour transitions.

The image scaling is also lacking. Yes, it can be observed that the television tries to "enhance" the quality, but the end result is far from ideal. The image often appears slightly jagged, which is particularly noticeable in the example of tree branches in the background. Additionally, the Hisense S7NQ has a clear tendency to crop the image at lower resolutions, causing subtitles in news items or finer details in the image to be missed.

Philips PUS8359 is not the best choice for watching sport. The lack of even basic motion smoothing functionality means that the image during fast-moving scenes is not adequately clear. Despite the use of an IPS panel (43 and 55'), which theoretically should offer better sharpness than VA panel variants, there is no noticeable improvement regarding blurring. In pictures with fast movement, the figure of the alien is clearly blurry, indicating that the television struggles to maintain sharpness in dynamic shots.

When it comes to motion fluidity, the television performs remarkably well. Although the S7NQ was designed primarily for displaying static elements – such as images – the manufacturer has implemented a 144 Hz refresh rate matrix. As a result, sports and games look really good on it.

For materials that are not recorded at a high frame rate, the manufacturer has provided two features that allow you to adjust the picture to your own preferences. "Motion blur reduction" and "judder reduction" operate on a 10-point scale, allowing you to choose between a more cinematic image – with characteristic frame jumps – and a smooth effect reminiscent of a "soap opera". How to set this up? That’s a personal matter – we leave the decision to you.

In terms of compatibility with consoles, Philips PUS8359 is mainly suited for occasional gamers. Although the television is equipped with an HDMI 2.0 port, it offers features such as Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR), and Game Bar. ALLM automatically switches the television to low latency mode, making quicker reactions easier during gameplay, while VRR smoothly adjusts the refresh rate, eliminating screen tearing issues. The Game Bar provides quick access to game settings and real-time monitoring of parameters; however, in our opinion, it performs worse compared to the competition's solutions.

However, more demanding gamers may feel unsatisfied. Philips PUS8359 does not support advanced HDR formats in games or higher refresh rates, which is due to the use of a 60 Hz panel. These shortcomings limit the television's capabilities in delivering smooth and detailed experiences during fast, dynamic gameplay.

Although the S7NQ is a "picture" type television, it can indeed be used for gaming. Really. Here you can find almost everything (except for the HGiG mode) that a modern gaming television needs. The 144 Hz panel and two full-fledged HDMI 2.1 ports allow for the hassle-free connection of two consoles, such as the PlayStation 5 or Xbox Series X/S.

The television supports Automatic Low Latency Mode (ALLM) and Variable Refresh Rate (VRR), with no stuttering or issues. It also handles displaying high frame rates at lower resolutions without any trouble. Hisense deserves praise for a very attractive Game Bar – it displays all available picture options, and additionally, we have the ability to enlarge the minimap or turn on the crosshair (because sometimes someone might actually want to "aim" 😉).

The only missing element – as we mentioned earlier – is the lack of a proper implementation of the HGiG mode. It is specifically responsible for automatically adjusting the picture in games as the creators intended. It's a shame, because that’s the only thing preventing the Hisense S7NQ from being a full-fledged gaming "beast".