Philips OLED769 vs Samsung The Frame LS03D

Philips OLED769 performs quite well, particularly in film scenes with small points of light. The television surprises with its brightness, reaching around 800 nits, which is an impressive result. As a result, fine sources of light, such as street lamps at night or stars in the sky, are sharp and full of detail. However, the biggest challenge for this model is the scene with a full-screen burst of sunlight. In such moments, the brightness drops to about 250 nits, which is not very impressive. This is a typical problem for cheaper OLED displays, which struggle to maintain high brightness across the entire screen surface.

Samsung The Frame LS03D performs really well with brightness. Results of 700 nits make bright elements on the screen look striking and detailed, whether they illuminate the entire screen or appear as small points of light against a dark background. In more demanding scenes, like the fourth sequence from the film Sicario 2, the black levels are average, but we have already discussed this in the section on contrast. As for brightness – the television definitely excels here. An additional advantage is the quantum dot coating, which is QLED technology. Thanks to this, the colour palette coverage has been improved, although The Frame does not stand out in this regard compared to the competition.

The "Film" mode proved to be the best factory setting in terms of fidelity to the source material, and it is on this that we based our tests. However, like other factory modes, it was not without flaws. Let us examine, therefore, what exactly went wrong in SDR and HDR materials.

In both cases, the white balance was disrupted by the excessive dominance of green and red hues. This phenomenon created a yellowish tint that spread across the entire image, leading to issues such as yellowed whites and unnatural skin tones. These problems were clearly highlighted on the "ColourChecker" palette, where each of the samples was shifted towards warmer tones.

As for contrast and brightness, in the Philips OLED769, we can look at two key graphs: Gamma for HD content and the EOTF curve for 4K HDR content. In the case of the first graph, the gamma value falls below the optimal level of 2.4, resulting in an increase in brightness of light areas of the image. This means that bright elements may be slightly overexposed, losing detail and depth. In contrast, the EOTF curve for 4K HDR content performs really well. The graph shows that the television effectively conveys details in both the brightest and darkest areas of the image, resulting in a realistic and dynamic representation of scenes.

Samsung offers several picture modes on its televisions, but undoubtedly the Filmmaker Mode is the one that should provide the most natural representation of content. Unfortunately, as is often the case with mass production, the differences between units can be considerable, and our tested model was not free from a few issues.

In the case of SDR content, the white balance leaned heavily towards red, with a slight boost in blue. This effect was particularly noticeable in comparison images – for example, in a photograph of a boy whose face was unnaturally flushed. The gamma, or brightness characteristic, also did not perform perfectly – the image was slightly brightened, which detracted from its depth.

In 4K HDR content, the white balance was again dominated by red, this time in combination with green. Meanwhile, blue clearly lost intensity, which was easy to notice on the Color Checker palette, where colours began to "drift" in the wrong direction. The EOTF curve, responsible for brightness in HDR content, showed that the television has a tendency to excessively brighten the image, especially in the darkest elements of scenes.

Overall, while it did not look terrible, it definitely required adjustment. Fortunately, Samsung offers extensive calibration options, which provides the chance for a significant improvement in image quality. Therefore, we proceeded with professional calibration to extract the full potential from this television.

After professional calibration, Philips OLED769 truly shines in terms of colour accuracy. The television has been completely stripped of any yellow tint in both HD and 4K content. The Colour Checker test confirms that deltaE errors are minimal, occasionally exceeding a value of 2, which means we can speak of almost perfect director's representation.

When it comes to contrast, the situation is equally impressive. With 4K materials, there wasn't much to improve initially, while the gamma chart has been significantly enhanced. This allows dark and light areas of the image to be represented with greater accuracy, resulting in a realistic and dynamic portrayal of scenes.

The calibration has allowed the full potential of this television to be unleashed, both in terms of colours and contrast. Philips OLED769 now offers vivid, natural images of high quality that will delight any user, whether they are watching films or using other multimedia.

After professional calibration, the Filmmaker Mode shows its full potential. The white balance in HD content is exemplary – errors at the level of 0.5 indicate almost perfect colour reproduction accuracy. The image now looks natural, and the colours are precisely as they should be. In 4K HDR content, the effect is not quite as perfect, but it still maintains a really high level. The colours are vibrant, well-saturated, and the overall picture quality can be impressive.

So where does the problem arise, given our praise for colour reproduction? Unfortunately, the entire experience is marred by brightness characteristics. The gamma in HD content looks decent, but in 4K HDR it's not as good. The EOTF curve shows that the television excessively brightens certain parts of the image, which is a result of construction limitations. The lack of local dimming means that the television cannot accurately control the differences between the brightest and darkest areas of the screen. This is a barrier that simply cannot be overcome in this model.

Nonetheless, after calibration, Samsung The Frame LS03D offers excellent colour reproduction, particularly in HD content, and the overall appearance is considerably better than before the settings were corrected.

When it comes to lower quality materials, the distortion reduction in the Philips OLED769 handles tonal transitions well, especially at the minimum setting. It is worth noting that at this setting, film grain is not blurred, which is a pleasant surprise, as such negative phenomena often occur with other manufacturers. Overall, it is quite a decent solution. However, it should be pointed out that this setting does not work in HDR mode, where gradation issues are much more pronounced. In HDR mode, the television struggles with smoothing tonal transitions and may present more noticeable distortions and noise, reducing picture quality in dynamic scenes.

Regarding digital processing, the Philips OLED769 performs well. The model in the photo is not overly jagged, and the branches in the background lack the characteristic jagged edges. The television achieves this effect thanks to the absence of artificial sharpness, which may be an advantage for some users. Others, however, may find this less attractive, as they prefer a more vibrant, sharper image instead of a subtle effect. This effect can be mitigated by using a higher setting for the "Sharpness" parameter.

It’s time to check how Samsung The Frame LS03D performs with older, lower-quality materials. We already know that the fluidity of tonal transitions is at a very high level here, so we were curious to see how the television would handle smoothing them out.

The noise reduction feature in the "Standard" setting does its job well – tonal transitions are noticeably smoothed out, and at the same time, the image does not lose too much detail. However, it is worth noting that this effect also smooths out film grain, so its use will be a matter of individual preference.

When it comes to image scaling, the television also performed really well. The test chart turned out solid – the model was reproduced correctly, with clear details. The branches in the background, though slightly frayed in places, generally appear natural and do not stand out as imperfections.

Philips OLED769 features a multi-stage motion smoother called "Motion Style", which will satisfy users who appreciate the ability to customise the fluidity of motion in films. With this function, you can set the image to be more frame-like or smooth, resembling a theatrical effect. This is a great solution for those who want to adapt the displayed content to their visual preferences. Gamers will also not be disappointed, as the television, like most OLEDs, is equipped with a 120Hz panel. This provides exceptional fluidity and dynamism of the image. Unfortunately, Philips OLED769 does not have the BFI (Black Frame Insertion) feature, which could further improve motion fluidity and sharpness. Despite this limitation, the television still offers excellent visual experiences for both cinema lovers and gamers. This is definitely one of its strong points.

Firstly, it is worth noting that the model we tested in the size of 55 inches, like the 65, 75 and 85-inch versions, is equipped with a 120 Hz panel. Unfortunately, the 43 and 50-inch variants of this series only offer 60 Hz panels, which is worth keeping in mind when making a purchase. As for improving motion fluidity, the television offers a feature called “Picture Clarity”. This is a classic motion smoother that gives users the ability to adjust it using two sliders:

Motion blur reduction – this controls the sharpening of the image in dynamic scenes. The higher the value, the less blur during quick camera movements or moving objects. However, overly aggressive settings may cause the image to become unnatural, appearing like a “soap opera”.

Judder reduction – this slider influences the smoothness of frame playback, particularly in materials with a lower frame rate, such as films (24 fps). Higher settings can smooth motion but may also lead to excessive “plasticity” of the image.

Both sliders operate on a scale from 0 to 10, allowing for precise adjustment of the effect to one’s own preferences. It is worth experimenting with the settings to find the perfect balance between fluidity and a natural appearance of the image. We recommend setting them as shown in the picture.

Philips OLED769 has been designed with gamers in mind, offering full compatibility with consoles and the highest quality of gameplay. The television received the maximum rating in this category, providing everything that the heart desires. With HDMI 2.1 ports fully supporting ALLM (Auto Low Latency Mode) and VRR (Variable Refresh Rate), the television ensures smooth and hassle-free gaming. ALLM automatically switches the television to low latency mode, while VRR eliminates stuttering and screen tearing, resulting in fluidity and stability in gaming. The Dolby Vision gaming feature is another advantage, although it only works at a frequency of 60 Hz. Most casual gamers will likely not feel the lack of a higher frequency; however, more demanding users may have some reservations. This allows for enjoyment of a dynamic range of tones and realistic images, enhancing the gaming experience. PC gamers will also not be disappointed, as Philips OLED769 offers full compatibility with Nvidia graphics cards, thanks to support for G-Sync. This technology synchronises the refresh rate of the television with the graphics card, eliminating tearing and stuttering, resulting in excellent image fluidity.

Philips OLED769 is a television that perfectly meets the needs of gamers, offering a wide range of advanced features and technologies that significantly enhance gameplay quality and user comfort.

The Frame LS03D in the 2024 version has been equipped with four HDMI ports, but only one of them supports the 2.1 standard with a bandwidth of 40 Gb/s. This is important information if we plan to connect more than one device that requires a 4K@120 Hz signal – for example, two consoles or a console and a gaming PC.

In terms of features for gamers, The Frame truly has a lot to boast about. Here we find ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), and HGiG. It is worth highlighting that HGiG has been very well implemented here, which is particularly important as the television does not support Dolby Vision in games (which is only available on Xbox consoles). In this case, HGiG turns out to be a better standard for gaming.

Samsung has also not forgotten about features that enhance gaming comfort. Game Bar is an advanced panel for gamers that allows for quick adjustment of screen settings without the need to dig through the television's menu. We can even change the aspect ratio from 16:9 to a panoramic 21:9, which may be a significant advantage for some gamers.

However, Samsung's biggest ace up its sleeve is the Game Motion Plus feature. This is a special smoothness enhancer dedicated to games that adds additional frames of animation without significantly affecting input lag. The effect is truly noticeable – the image appears much smoother, which fans of dynamic titles will particularly appreciate.

In summary – Samsung The Frame LS03D is a television that offers a solid set of features for gamers. While the limitation to one HDMI 2.1 port may be a downside, the rest of the solutions makes gaming on this television a truly enjoyable experience.