TCL P755 vs PHILPS PUS9060

TCL P755 provides average HDR effect quality. The maximum brightness of the TV is slightly below 300 nits. Such brightness limits the intensity of bright areas in HDR content. In practice, this means that bright elements may not be sufficiently pronounced, affecting the overall impression of contrast. However, the TV offers wide coverage of the DCI P3 colour gamut, reaching about 93%. As a result, colours are vibrant and saturated, significantly improving colour reproduction quality in HDR content. Despite the limited brightness, the wide colour range allows for richer and more realistic shades.

The One is bright enough to enjoy films recorded in HDR format. The average brightness of this model is around 500 nits, so we can easily expect a pleasant viewing experience with films from streaming platforms. Of course—there's always room for improvement, because when it comes to brightness, you can never have too much for this type of content. Unfortunately, a disappointing surprise may be the coverage of the DCI-P3 colour gamut that the PUS9060 offers. Although the manufacturer boasts the use of a QLED filter here (it’s actually PFS LED), it's hard to speak of any positive effects from its operation. 85% coverage of the DCI-P3 gamut is certainly not a level to brag about in 2025—especially in a television marketed as QLED.

The colour reproduction in the P755 in "Cinema" mode, although it is the best factory setting, leaves much to be desired. The biggest issue is the white balance, where the chart clearly shows a spike in the red colour and a drop in the green colour. This leads to a shift in colours towards red, causing the colours on the screen to appear less natural and may look incorrect, especially in scenes with a white or neutral background. This is confirmed by the "Colour Checker" test, which reveals that the colours are indeed shifted towards red, affecting the realism of the image and reducing the perception of colour depth. In terms of contrast, the gamma chart analysis shows significant fluctuations, particularly in the dark areas of the image, where values drop below the optimal level of 2.4. As a result, darker areas may be displayed brighter than they should be. Additionally, the EOTF curve, responsible for brightness reproduction, sits slightly above the reference curve. The graph shows a slight increase in brightness to about 50%, after which there is only a minor drop. This leads to excessive brightness enhancement in the mid-range of the image and may result in loss of detail and distortion in brighter scenes.

We tested the PUS9060 in the best factory mode applied to it – of course, we're talking about the movie mode. Unfortunately, the best in this case does not mean good. The image in this mode was clearly yellowish and leaned towards orange tones. The white balance on this television was definitely too warm, giving the entire scene an artificial, somewhat "tanned" appearance. This directly resulted in significant colour inaccuracies, which in the worst cases exceeded a delta E value of 6 – thus, they were visible to the naked eye. The situation was reversed in HDR mode, where the image became too blue and too cool in perception. Additionally, there was a slight boost in brightness – the gamma curve and EOTF suggested that the television slightly brightens the image, which was also evident in the comparative image below.

After calibration, the colour reproduction on the television significantly improves when it comes to SDR content. The colour curves are now close to the ideal value, and the gamma is more stable. Although the dip at the beginning of the graph to the values is still present, the overall accuracy of colour reproduction is much better. The “Colour Checker” test shows that most colour samples have errors below level 2, indicating improved colour fidelity. A few deviations are present, but generally, the colours are now more realistic and consistent with reality.

Calibration also brings improvements in HDR content. The white balance has been corrected, translating to more natural colour reproduction. The EOTF curve, although now closer to the reference curve, still shows a slight boost in brightness at the beginning of the graph. This leads to minor distortions in very bright scenes, but the overall tonality and detail have been enhanced. Dynamic tone mapping works more effectively, improving image quality in bright areas and preserving more details.

Although the image from the device does not achieve full perfection, calibration brings significant improvement. After adjusting the settings, the television performs much better, offering more realistic and accurate colour reproduction in SDR and HDR content. While some shortcomings can still be noticed, calibration effectively eliminates many previous issues, ensuring better image quality and more natural colours.

Thanks to calibration in movie mode, we managed to completely eliminate the yellow-orange tint, which significantly improved the reception of the entire scene. The image has become much more visually pleasing, though it still falls short of reference settings. It may now appear slightly bluish, but it is still a considerable improvement compared to the factory settings.

Unfortunately, we could not significantly improve the brightness characteristics, but this is more about the design of the television itself - the lack of local dimming limits the possibilities for precise brightness management. The PUS9060 simply cannot dynamically adjust luminance like more advanced models do. Nevertheless, after calibration, the overall reception is much more enjoyable, especially in film material.

The “Gradual Smoothing” function works quite well, effectively eliminating visible boundaries between different shades of the same colour. Thanks to it, tonal transitions are smoother. Unfortunately, this function is not available in HDR mode, which can affect the quality of tonal gradation in higher dynamic range materials.

In the case of image scaling, the television does not perform its best. There are noticeable edge cut-offs, particularly evident on the model's figure and the branches of trees. The blurring of details in these areas affects the overall sharpness of the image. This may be noticeable when watching content in a lower resolution. Additionally, SD quality image is displayed with slight cropping at the top as well as the bottom.

In the PUS9060, we find another version of the image processor known by Philips as P5 Perfect Picture, which aims to enhance the image – especially the imperfect ones. The TV includes a distortion reduction function, which serves to smooth tonal transitions, meaning those "colour joins" we mentioned earlier. This function does its job very effectively – there’s no strong gradation of colours, but unfortunately, it operates quite aggressively, occasionally dimming desired elements like material textures or film grain. So, it can be seen as a bit of a compromise. We wouldn’t generally recommend using this function for movies, but for more casual content – like YouTube or regular TV – it’s absolutely suitable.

The P5 processor also enhances the quality of lower resolution images, and it does this quite effectively. The test image with the model is very soft – sometimes almost too soft – but this can be easily improved with the sharpness slider, adjusting it to one’s own preferences. It’s also pleasing to see that the TV doesn’t clip the edges in SD materials – which unfortunately still happens in some TV models.

The television offers decent, though not perfect, results in terms of motion smoothness. In the case of movies, the television has a "Flicker Reduction" feature that allows for adjustment of motion smoothness on a scale from 1 to 10. With this option, we can tailor the image appearance to cinema or more theatrical preferences (with lower or higher speed).

PHILIPS PUS9060 is equipped with a 4K panel featuring a 144 Hz refresh rate, so we can confidently say it’s suitable for both watching sports and gaming. And indeed it is. But what about movies, which are most often recorded at 24 frames? As with most of the TVs we’ve tested with a refresh rate of 120 Hz and above, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in films – you can set the picture to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight “judder” (lower settings). Additionally, there is a feature called "Motion Blur Reduction," which limits motion blur – and this is a very useful feature, especially when watching sports.

The device offers a range of features useful for gamers, such as ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), Dolby Vision for gamers, and Game Bar. ALLM automatically switches the TV to low latency mode, significantly improving responsiveness to commands from the controller and minimising input lag. VRR synchronises the screen refresh rate with the number of frames generated by the console, eliminating the tearing effect and providing smoother gameplay. Dolby Vision for gamers enhances picture quality by offering better colour and contrast reproduction in games that support this format. The Game Bar feature allows quick access to game settings and monitoring of key parameters such as response time.

However, the TV has some limitations. The 60 Hz panel prevents the display of signals with higher refresh rates at different resolutions, which may affect the fluidity of the image in dynamic games. Additionally, the lack of support for G-Sync technology for PC may impact the quality of gameplay on a computer. It is also worth noting that the HGiG mode, which aims to improve image quality in HDR games, does not work correctly on this model, negatively affecting the visual experience in HDR-supported games.

PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. It features VRR, ALLM, and also includes HGiG implementation, which helps set up HDR in games as intended by the developers. The television supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you're playing on Xbox, PS5, or PC, everything works as it should. It also comes with a simple Game Bar, a special menu for gamers that allows you to quickly check if the ALLM mode is indeed working in low latency mode.

And of course – Ambilight TV. Let’s face it – without LEDs on the back, it’s not a true gaming rig. 😉 The multicoloured backlighting really adds to the atmosphere, especially in the evening. It may not appeal to everyone, but younger gamers will be thrilled – it just looks impressive.