Philips PUS8359 (VA) vs Samsung DU7192 (VA)

Philips PUS8359 didn't impress us with its performance in HDR materials. This model is capable of generating a maximum brightness of 320 nits, and often even less. Such results, combined with the lack of support for HDR Dolby Vision, mean that the image will be significantly darker compared to the source material. Therefore, it would be more beneficial for this television to play SDR content. This is also suggested by the quite low coverage of the DCI-P3 colour gamut at 83%, resulting in significant colour deficiencies. The fact remains that the television supports an HDR format based on dynamic metadata; however, HDR10+ is such a niche format that it doesn't offer any major advantages.

On the luminance charts, the peak brightness of the television is around 280 nits. Unfortunately, such a value is too low to fully enjoy the effects of HDR, which require significantly higher luminance. In the tested materials, such as The Meg or Gemini Man, the lack of adequate brightness severely limits the magic of HDR, and details in the brighter parts of the image are not sufficiently highlighted. For users primarily consuming SDR content, this quality level might be acceptable but it is definitely not enough when it comes to HDR. Additionally, a DCI-P3 colour gamut coverage of 82% does not favour presenting HDR content in its full glory. The limited colour range makes it difficult for the television to reproduce vibrant and diverse hues, which is crucial for achieving a cinematic experience.

The best factory mode in terms of fidelity to the source material was "Film". This is what we used during our tests. Just like every other factory mode in televisions, it had its drawbacks. So we'll check what exactly was wrong with both SDR and HDR materials. In both cases, the white balance exhibited an excessive dominance of the green and red colour combination. This created a yellow tint spreading across the entire image, causing issues such as yellowed whites and problems with skin tones. This state of affairs was perfectly illustrated on the "ColourChecker" palette, where each of the tested samples was pushed towards its warmer counterparts. The foundation of the image is primarily contrast and black. These are represented by gamma charts and the EOTF curve. Looking at the first one, we can see a true rollercoaster, as both elevated and lowered gamma can be observed. The heavily elevated gamma caused visibility issues in black levels, whereas the lowered gamma resulted in a dramatic reduction in contrast. In this context, the EOTF curve performed significantly better, as it only slightly brightened the image.

The best factory mode we relied on during testing turned out to be "Filmmaker." Although it is the mode that most closely aligns with the creators' intent, it still has some imperfections. In the white balance graph for both SDR and HDR, there is a clear dominance of red, resulting in significant yellowing, particularly noticeable in whites and on actors' faces. In HDR mode, there is also a slight dominance of green, which, however, does not have as large an impact on the perception of the image. The gamma, responsible for brightness in SDR materials, performed quite well, but with one serious reservation. In the darkest parts of the image, it was too low, causing excessive brightening of those scenes, depriving the film of drama and contrast. In the case of HDR, the white balance remains at a similar level, but the EOTF curve graph draws attention. At the beginning, the curve noticeably bulges, leading to strong brightening of the darkest scenes. Then, the result sharply drops below the reference line, resulting in an overly dark image and a loss of dynamics in the brighter parts.

In summary, the "Filmmaker" mode, despite its advantages, needs refinement—especially regarding white balance and proper management of brightness in the darkest and brightest parts of the image. In its current form, it may be acceptable for less demanding users, but for viewers expecting precise image reproduction, it may leave much to be desired.

Philips provides a wide range of image calibration tools in both its higher-end and budget models. We utilised these tools and got to work, which wasn’t as easy as many of you might think. While we managed to model the white balance, significantly improve the gamma, and refine the EOTF curve in both cases, the deltaE errors remained exceptionally high. There are several reasons for this situation, which are directly related to the low coverage of the DCI-P3 colour gamut and the maximum brightness of the unit in HDR material.

Even with its lower models, Samsung offers advanced image calibration tools, which allow for significant improvement of factory settings. We took on this task, and the results turned out to be more than satisfactory. The white balance, which previously exhibited a strong yellow tint in both SDR and HDR, has been significantly improved. Although minor deviations from the norm can be observed, the overall effect is much cleaner and more natural than before calibration. As a result, whites and skin tones look much better. We were also able to properly model the gamma in SDR content, allowing for maximum contrast that this television can offer. The EOTF curve, responsible for HDR content, has also been improved – the image is no longer brightened or darkened as drastically as it was before calibration. Despite these successes, HDR content still struggles with high deltaE error values. The main reason lies in the limited brightness of the television, which does not allow for a full representation of the dynamics of HDR content. Nonetheless, after calibration, the image is clearly better and much closer to the creators' intent. For users seeking the best possible quality in this class of equipment, calibration is definitely recommended.

In this paragraph, we will look at two functionalities. We will once again take a look at the feature responsible for tonal transitions, but we will also check how the television handles image scaling. The option responsible for smooth gradation is called "Distortion Reduction." As we have established, it quite effectively smooths out inconsistencies. However, we must point out two things: we cannot enable it for HDR material, and it blurs details in films.

The tested television does not boast the best image scaling. The overall blurriness of the image is quite noticeable, but what’s worse, it blurs details. This is particularly evident on the branches and hair of the model. There is also a characteristic white halo around the character.

The tonal transition smoothing feature works in two modes – 'off' and 'auto'. Turning it off causes gradation issues, while the 'auto' mode provides smooth transitions, but at the cost of grain effect and details, which are often blurred. Due to these limitations, we do not recommend using this feature, as confirmed by our tests conducted with it turned off.

Scaling lower resolution materials in this model is not impressive. Details are blurry, and the edges of objects may contain artifacts. This limitation means the television performs better with higher resolution content.

Philips PUS8359 will not be the best television for sports. The reason for this is the lack of implementation of even the basic motion smoothing feature, which was to be expected given the price of the device. We also note that we are dealing with a VA panel, whose sharpness does not stand at the highest level by itself. This type of panel is mainly associated with high contrast, which comes with a rather slow response time, as we can clearly read from the matrix analysis results. As you can see, from the pictures captured in fast motion, the image is blurred typically for this type of panel. While it may not be the ideal option, it can conditionally be used for watching sports; however, one must keep in mind the less-than-sharp motion. It is worth mentioning that movies will be characterised by judder since the television does not possess any, not even the simplest, motion smoother.

Even though Samsung DU7192 is the lowest model in the manufacturer's range, it is equipped with a motion smoothing system. While the functionality of this solution is significantly limited compared to more expensive models, its mere presence makes the TV stand out against the competition in this price bracket. The TV supports a maximum refresh rate of 60 Hz, which is sufficient for comfortable viewing of movies and series, but may be inadequate for dynamic content such as sport. In the motion smoothing menu, we find, among other things, a "Vibration Reduction" feature. Unfortunately, its performance leaves much to be desired – regardless of the setting, the image retains the characteristic stutter known from material recorded at 24 frames per second, which means that this feature practically fails to fulfil its purpose.

It won’t be a surprise if we say that Philips PUS8359/12 only has the most basic support for consoles. Once we connect the console, we can expect features like VRR and ALLM. This is quite pleasing for the former, as life has shown that even in more expensive units, there can be issues with this. A nice touch is the implementation of a special GameBar that allows changing settings on the "fly", so we won't have to exit the gameplay and become unnecessarily distracted. This feature also allows for adapting the gameplay to the needs of individuals with disabilities, which will certainly be extremely beneficial.

Samsung DU7192 is equipped with HDMI 2.0 ports, which is expected at this price range. This limitation means there is no support for the full capabilities of the latest generation consoles, such as VRR technology. The TV offers only basic features for gamers – automatic switching to low-latency mode (ALLM), and support for basic HDR for games in HGiG standard. HGiG allows for displaying HDR content in games according to manufacturers' guidelines, however, the limited brightness of the TV does not allow full enjoyment of the effects that this standard offers. Unfortunately, there are no conveniences such as GameBar, which is increasingly common even in cheaper models and significantly facilitates quick adjustment of settings for games. The presence of this feature could significantly enhance the user experience, especially for those who frequently switch display modes.