Philips PUS8359 (IPS) vs Hisense S7NQ CanvasTV

The quality of the HDR effect on the Philips PUS8359/12 television is also not impressive. A brightness level of 280 nits is too low, resembling standard SDR more than true HDR, which is clearly evident on the five tested test cards. Additionally, the television does not impress in terms of colour gamut coverage – just 76% DCI-P3 is a result that can be considered poor, especially compared to other models in a similar price range.

When it comes to the brightness of the television and how it handles bright elements while watching films, it's just average – similar to the contrast. The average brightness level of the Hisense S7NQ is around 500 nits. This is a value that allows you to feel the hints of true HDR, but it's definitely not enough to speak of remarkable effects. However, the television should be praised for its colour gamut coverage – films look very colourful and vibrant. Thanks to the use of a PFS LED (QLED) coating, the device is able to cover more than 90% of the DCI-P3 colour gamut and over 72% of the wider BT.2020 palette. For a television of this class – these are really very good results.

The most faithful factory mode in terms of compliance with the source material turned out to be "Film," which was used in our tests. However, like other factory modes, it also had its drawbacks. Both in SDR and HDR materials, we noticed issues with white balance, where the dominance of green and red resulted in a yellowish hue. This effect was particularly evident in the form of yellowed whites and unnatural skin tones. The "ColourChecker" palette test showed that each colour was shifted towards warmer tones, which affected the accuracy of colour reproduction. A key aspect of the image is also contrast and brightness, which can be assessed by analysing the gamma charts and the EOTF curve. In the gamma chart, we observed significant deviations – both excessively high values that caused loss of detail in the shadows and excessively low values, which led to a drastic drop in contrast. Compared to gamma, the EOTF curve performed better, only slightly brightening the image, which had a less negative impact on overall quality.

Let's check how the Hisense S7NQ CanvasTV performs in terms of colour reproduction in its best factory mode, which is Filmmaker. Right from the start, it’s clear that it’s definitely better than in dynamic or standard mode, but there are still a few things to nitpick. In terms of image quality from HD signals, the colours are slightly skewed – there’s a dominance of cooler blue tones and a lack of red. This makes the image seem a bit too cool.

A similar effect is noticeable in 4K content, but it’s more pronounced there. The excessive exposure of blue tones and lack of red makes the image appear distinctly cold. However, the biggest issue with this TV isn’t the colours themselves but the way brightness is managed. The unit we tested slightly increased brightness compared to the reference value. The result of this is indeed better visibility of details, but at the cost of significantly lighter blacks – which makes the entire image seem more "flat."

A similar phenomenon was observed in the 4K signal – the slightly inflated curve at the beginning of the EOTF graph indicates that the TV has a tendency to overexpose certain scenes. Fortunately, this effect can be improved through professional calibration, which we will discuss in the next point.

Philips, in both its cheaper and more expensive models, offers a wide range of tools for image calibration. We used them to improve the quality of the displayed image, although it was not as straightforward as it might seem. We managed to adjust the white balance, improve the gamma, and fine-tune the EOTF curve; however, despite these efforts, the deltaE errors remained at a very high level. The main causes were limited coverage of the DCI-P3 palette and low maximum brightness, which significantly affected the final outcome. While the overall presentation is much improved, the design features of the television did not allow us to achieve spectacular results.

The results we achieved after calibrating the Hisense S7NQ are really very good. Thanks to the calibration, we managed to eliminate excessive blue tone exposure and deficiencies in red with HD signals. A similar, albeit slightly weaker effect was also achieved with 4K HDR content. Brightness management in HD materials has also improved – the television no longer struggles with brightening the image "overall".

However, there are things that cannot be circumvented. The character of the EOTF curve has hardly changed, and the lack of local dimming means that the smallest elements on the screen will always be slightly overexposed. You just have to come to terms with this when choosing a television with a similar type of backlighting. Nevertheless, the final effect is very good and should fully satisfy the vast majority of users.

In this paragraph, we'll take a look at two functionalities. We'll once again examine the function responsible for tonal transitions, but we'll also check how the television handles image scaling. The option responsible for smooth gradation is called "Distortion Reduction". As we've established, it does a pretty good job of smoothing out inconsistencies. However, we must point out two things: we are unable to enable it for HDR content, and it blurs details in films.

The television being tested cannot boast the best image scaling. There is a noticeable overall blurriness in the image, but worse still, it blurs details. This is particularly evident on the branches and the model's hair. A characteristic white halo around the figures is also visible.

Equally important is how the television handles tonal transitions with a poorer signal – for example, in older films, on television, or on YouTube. Unfortunately, despite the presence of the “Smooth and Gradient Picture” feature, which was supposedly meant to improve this aspect, its functionality is really poor. It’s barely noticeable that it has any real impact on the visibility of colour transitions.

The image scaling is also disappointing. Yes, you can see that the television is trying to “pull up” the quality, but the end result is far from ideal. The image often appears slightly jagged, which is particularly noticeable in the example of tree branches in the background. Additionally, the Hisense S7NQ has a clear tendency to crop the image at lower resolutions, which could result in missing subtitles in the news or finer details in the image.

Philips PUS8359 is not the best choice for watching sports. The lack of even basic motion smoothing features means that the picture in dynamic scenes isn't sharp enough. Despite using an IPS panel (43 and 55'), which theoretically should provide better clarity than VA panel variants, there’s no noticeable improvement in terms of motion blur. In photos of fast movement, it’s clear that the figure of the little green man is distinctly blurry, indicating that the TV struggles to maintain sharpness in dynamic shots.

When it comes to motion fluidity, the television performs really well. Although the S7NQ was primarily designed for displaying static elements – such as images – the manufacturer has used a panel with a refresh rate of 144 Hz. As a result, sports or games look really good on it.

For content that is not recorded at a high frame rate, the manufacturer has provided two features that allow you to adjust the picture to your own preferences. “Motion blur reduction” and “blur” operate on a 10-point scale, enabling a choice between a more cinematic image – with characteristic frame jumps – and a smooth effect reminiscent of a “soap opera.” How to set this up? That’s a personal choice – we leave the decision to you.

In terms of console compatibility, Philips PUS8359 is mainly suitable for casual gamers. Although the TV is equipped with an HDMI 2.0 port, it offers features such as Automatic Low Latency Mode (ALLM), Variable Refresh Rate (VRR), and Game Bar. ALLM automatically switches the TV to low-latency mode, making quicker reactions during gaming easier, while VRR smoothly adjusts the refresh rate, eliminating screen tearing issues. The Game Bar provides quick access to game settings and ongoing parameter monitoring; however, in our opinion, it performs worse compared to competitors' solutions.

However, more demanding gamers may feel disappointed. Philips PUS8359 does not support advanced HDR formats in games or higher refresh rates, which is due to the use of a 60 Hz panel. These shortcomings limit the TV’s ability to deliver smooth and detailed experiences during fast-paced, dynamic gameplay.

Even though the S7NQ is an "image" type television, you can actually play games on it. Really. It has practically everything (except for HGiG mode) that a modern gaming television needs. The 144 Hz panel and two full HDMI 2.1 ports allow for seamless connection of two consoles, such as the PlayStation 5 or Xbox Series X/S.

The television supports Automatic Low Latency Mode (ALLM) and Variable Refresh Rate (VRR) without any stutters or issues. It also handles high frame rates at lower resolutions without any trouble. A shoutout to Hisense for the very attractive Game Bar – it displays all available image options, and additionally, we have the ability to enlarge the minimap or turn on the crosshair (because sometimes someone might actually want to "aim" 😉).

The only missing element – as we mentioned earlier – is the lack of proper implementation of HGiG mode. This is the feature responsible for automatically setting the image in games as the developers intended. It’s a shame because it's the only thing that separates the Hisense S7NQ from being a full-fledged gaming "monster".