LG UT8100 (IPS) vs Samsung U8000F (IPS)

The LG UT8100 television unfortunately does not meet expectations in the HDR effect category. A peak brightness of only 300 nits on the luminance chart is well below the required value to fully enjoy HDR effects. In practice, the image resembles SDR quality more than true HDR, which is particularly evident in demanding high-contrast scenes. The coverage of the DCI-P3 colour palette is only 82%, which further limits the ability to present vibrant and rich colours. Instead of impressive visual experiences, we receive a muted and washed-out image. For those looking for a television to fully utilise HDR content, the LG UT8100 model turns out to be quite disappointing.

Better doesn't mean good – and that's exactly how you can sum up the capabilities of the U8092F when it comes to displaying bright movie scenes in HDR mode. The brightness of the panel is just under 250 nits, which is definitely too low to enjoy any light effects. An interesting situation was observed during measurements of the fourth scene from the movie Sicario 2 – the television clearly dimmed the entire screen in an attempt to achieve better black levels (which still remain weak). One could even suggest that the device employs some form of "global dimming," but unfortunately – the effects are still very poor. To make matters worse, the television does not support a wide colour gamut – the coverage of the DCI-P3 space is around 80%, so don’t count on truly vibrant colours. The HDR image here looks more like slightly brightened SDR, and that’s the approach we would suggest you stick to when it comes to this television.

The Filmmaker Mode on LG UT8100, while theoretically the best for watching movies, has significant issues. The biggest problem is the white balance – drops in blue cause a noticeable yellowing of the image, visible in both HD and 4K content. These issues are confirmed by measurement results in the Colour Checker test, which indicate significant deviations in colour reproduction.

In terms of brightness characteristics, both HD and 4K content exhibit a large tonal boost. The gamma curve in both cases remains well below the reference value of 2.4, which leads to excessive brightening of darker elements of the image. A similar problem is evident in the EOTF curve – in the case of 4K content, the TV struggles to manage brightness correctly, resulting in issues with screen brightness. This means the factory settings of this model require significant adjustment to achieve better picture quality.

Samsung U8000F has been tested in the best possible built-in picture mode on the television, which is Filmmaker Mode. This mode should – at least in theory – provide a cinematic, reference image without unnecessary enhancements. For SDR content (mainly HD/SD), the television presented itself surprisingly well out of the box. White balance errors hovered around a value of 3, which is roughly on the edge of perceptibility. The only criticism could be directed at brightness management – the gamma chart showed a slight tendency to brighten or darken certain sections, but overall it performs quite well for this price segment.

Unfortunately, it looks much worse in HDR mode. Although the white balance was not terrible, the television had significant colour errors – particularly evident on the Color Checker chart, where almost every sample fell outside the target point. The image in HDR simply looks unnatural, and the colours can be shifted, muted, or too cool. This largely stems from the fact that U8000F does not support a wide colour gamut (DCI-P3). The television is physically unable to display correct colours in the HDR standard – and this is unfortunately felt in every more demanding material.

After calibrating the Filmmaker Mode, the gamma has been aligned to practically perfect, reference values, which has significantly improved the overall tonal characteristics in HD content. 4K HDR content also looks better, although some issues are still visible at the extreme ends of the graph, where the curve deviates from the ideal. The EOTF curve performs worse since the TV struggles to maintain the correct brightness values. As a result, the image in some scenes may be too bright or slightly dim, which stems from the device’s design. Nevertheless, the calibration brought significant improvement, particularly for HD content, where the tonal balance and colour reproduction are now at a much higher level.

Even though the U8000F already offered a fairly good picture in SDR straight out of the box, we managed to tweak it a bit more. We were able to remove a slight purple tint and adjust the gamma to a more reasonable level. However, the television still tends to over-brighten the smallest and brightest parts of the image – the gamma chart shows a characteristic "dip" that is hard to fully straighten out.

Unfortunately, the situation looks worse in HDR. It's difficult to talk about any significant improvement here – the television simply isn't designed for HDR content. We tried to adjust the picture in the advanced settings, but despite our efforts, the colour errors remained quite noticeable – a delta E above 7 is already significantly visible deviations. It's a bit unfortunate, but that's the charm of a budget build. In SDR, the U8000F performs reasonably, whereas HDR is simply not its league.

The fluidity of tonal transitions is also correct, although the effect depends on the settings. The update improved the operation of the smooth gradation function, smoothing transitions better than before, but introduced minor issues with detail loss, e.g. on textures.

Image scaling on LG UT8100 performs very well. The image presents itself decently, with no major issues regarding edge aliasing. Details are preserved at a satisfactory level, making materials of lower resolution look really solid on this television. As a result, users can enjoy watching older content without any noticeable defects in quality.

When it comes to how the Samsung U8000F handles lower quality materials, we must admit that Samsung has made progress compared to its predecessor from last year – the DU7192 model, which theoretically occupies the same place in the offering.

This year's model has been equipped with a function to improve the smoothness of tonal transitions, which has been implemented significantly better than last year. Yes, the TV still uses quite strong algorithms that can distort details or remove film grain, but even so – it can be confidently said that it operates effectively.

However, not everything has gone perfectly. The U8000F has noticeable issues with slight frame stuttering when watching very old content in very low resolution. If someone plans to play their old VHS tape, they must be aware that the picture may appear slightly "choppy".

LG UT8100, equipped with a 60 Hz panel, is particularly suited for those watching movies. The television offers the TruMotion system with a de-judder effect adjustment, which allows users to tailor the smoothness of the picture – from more choppy to exceptionally smooth, resembling a soap opera effect, depending on user preferences.

Samsung U8000F is equipped with a 60 Hz panel, so right from the start, it's clear that we shouldn't expect miracles. This is simply the standard in this class – sufficient for everyday viewing, but without any fireworks.

The television offers one motion smoothing slider – a feature called “Motion Blur Reduction”, which allows us to adjust the smoothness of the image in movies. Higher settings provide a more “theatrical” and smoothed effect, while lower ones maintain the original character of the film with a slight 24p effect. An interesting feature is “Clear Motion LED”, or BFI mode – which inserts black frames between the image frames to enhance motion clarity. However, in practice, the screen flickers significantly when it's activated, and it's better viewed as an experiment rather than something that truly enhances gaming comfort.

LG UT8100 offers basic features for gamers, such as ALLM and Game Bar, which makes it easier to access settings. The TV also supports HGiG, improving picture quality in HDR games. Unfortunately, the lack of support for Dolby Vision and VRR limits the device's capabilities, as does the 60 Hz panel, which excludes support for 120 Hz resolution. This model is more suited for less demanding gaming applications.

Samsung U8000F offers a basic set of features for gamers, which may still be sufficient for less demanding users. It has an automatic game mode – when a game is launched on the console, the TV automatically switches to low latency mode, which significantly improves response time. It also includes a VRR function, or variable refresh rate, which works within the range of 48 to 60 Hz. This means that both Xbox and PS5 won't produce the "tearing" effect – as long as we stay within this range.

And unfortunately, that's about it for the advantages. Additional features like Game Bar or higher refresh rates are reserved for higher models of Samsung’s 2025 line. In theory, the TV also supports the HGiG function, which should adjust the HDR image to the intentions of game developers. Unfortunately – although this function appears in brochures and store materials – its setup on the Xbox console turned out to be... impossible in practice.