PHILIPS PUS9060 vs TCL P89K / TCL P8K

The One is bright enough to enjoy movies recorded in HDR format. The average brightness of this model is about 500 nits, so we can count on a pleasant viewing experience for movies from streaming platforms without any issues. Of course, it could always be better, because when it comes to brightness, there is never too much for this type of content. Unfortunately, a disappointing surprise may be the DCI-P3 color gamut coverage offered by the PUS9060. Although the manufacturer boasts about using a QLED filter here (it’s actually PFS LED), it's hard to talk about any positive effects of its operation. 85% DCI-P3 color gamut coverage is definitely not a level to brag about in 2025 – especially in a television advertised as QLED.

The maximum brightness of the TCL P8K is around 300 nits, although in actual movie scenes, the TV maintains more around 250 nits. These values cannot be considered sufficient for achieving a full HDR effect – they are more akin to a solid base for SDR content. Therefore, we won’t see spectacular flashes, bursts of light, or moments when the screen truly “blinds” you, as is the case with more expensive models. The image is somewhat flattened, and the differences between light and shadow are more symbolic than realistic. Fortunately, TCL has a few aces up its sleeve that save the overall impression. One of them is the coverage of the DCI-P3 color gamut at around 93–94%. Thanks to an additional QLED layer (PFS LED), colors gain depth and intensity, clearly surpassing standard LCD panels. As a result, although the typical “wow effect” associated with HDR brightness is lacking here, the image can still impress with its saturation and vibrant tones, making movie scenes pulse with colors and avoiding a heavily faded appearance.

We tested the PUS9060 in the best factory mode it employs – of course, we’re talking about movie mode. Unfortunately, the best in this case doesn’t mean good. The picture in this mode was distinctly yellowed and leaned towards orange tones. The white balance on this TV was definitely too warm, resulting in an artificial, somewhat "sun-kissed" look for the entire scene. This directly translated to significant color errors, which in the worst cases exceeded a delta E value of 6 – thus, they were visible to the naked eye. The situation was the opposite in HDR mode, where the picture became too blue and too cold in appearance. Additionally, there was a slight increase in brightness – the gamma curve and EOTF suggested that the TV slightly brightens the image, which was also evident in the comparison photo below.

In Filmmaker mode, the TCL P8K revealed certain imperfections in image reproduction from the start. We noticed that the television tends to slightly brighten scenes – its gamma was somewhat lowered, which made the image appear slightly "washed out," lacking depth, as if the contrast had slipped out of control. This was most evident in HDR content, where the EOTF brightness curve clearly deviated from the reference values. As a result, the darker parts of the image looked too gloomy, while the brighter sections didn't always reach the proper level of luminance. A second noticeable issue was a slight oversaturation of blue – the television stubbornly boosted this color, which caused some parts of the image, especially skin tones and reds, to have a slight purple tint. This is not a major flaw, but to a discerning eye – noticeable. Fortunately, most of these errors could be corrected during calibration. You can see the results of this adjustment in the graphs and photos below.

Thanks to calibration in movie mode, we managed to completely eliminate the yellow-orange hue, which significantly improved the reception of the entire scene. The image has become much more visually pleasant, although it still falls short of reference settings. It may now appear slightly bluish, but it is still a significant improvement compared to the factory settings.

Unfortunately, we could not significantly improve the brightness characteristics, but that is more about the construction of the TV itself – the lack of local dimming limits the possibilities for precise brightness management. The PUS9060 simply cannot dynamically adjust luminance like more advanced models do. Nonetheless, after calibration, the overall reception is much more enjoyable, especially in film materials.

After calibration, the TCL P8K showed a completely different face. It managed to achieve nearly perfect, even reference-level color reproduction in both SDR and HDR content. The screen no longer had a tendency towards a cool tint, and the white balance was perfectly balanced. The gamma values for SDR material also finally look as they should – the image has the proper depth and no longer appears washed out. The only remark that can still be made about the P8K concerns its "Chinese" traits, known from most TCL models. The TV still likes to manipulate saturation in HDR content in its own way – sometimes slightly boosting it, sometimes smoothing it out, which means the effect is not always fully predictable. Nevertheless, after calibration, the colors look stunning, and their accuracy is truly surprising. In most cases, measurement errors dropped below values of 1-2, which is a result that significantly more expensive models would not be ashamed of.

In the PUS9060, we find the latest version of the image processor called P5 Perfect Picture, which is designed to improve the picture - especially the imperfect ones. The TV features a distortion reduction function, which smooths out tonal transitions, that is, those "color joins" mentioned earlier. And this function does so very effectively - there is no strong color gradation, but unfortunately, it works aggressively enough that it sometimes dims desired elements, such as material textures or film grain. So this can be considered a compromise. We would not recommend using this function for movies, but for more casual content - such as YouTube or regular television - absolutely.

The P5 processor also improves the quality of lower resolution images, and it does this quite effectively. The test image with the model is very soft - sometimes even too much - but this can be easily adjusted with the sharpness slider to match personal preferences. It is also pleasing that the TV does not cut off edges in SD content - which unfortunately still happens in some TV models.

The TCL P8K performs somewhat worse when it comes to the fluidity of tonal transitions in lower quality materials. The television does offer a feature to smooth out unwanted bands, but its effectiveness leaves much to be desired. Even at the highest setting, it’s hard to say there’s a real improvement – at times the effect is even the opposite of what was intended, as the feature can introduce small artifacts and unnatural blurriness on the screen.

On the other hand, upscaling, or scaling the image to 4K resolution, looks significantly better. The P8K handles this task surprisingly well – HD content, and even SD, is enhanced in an aesthetically pleasing manner without excessive loss of sharpness. There are indeed slight "hard" edges typical of this class of equipment, but this can easily be adjusted with the sharpness slider according to personal preferences. The final effect is more than satisfactory, especially considering the price range in which this model is located.

PHILIPS PUS9060 is equipped with a 4K display with a 144 Hz refresh rate, so we can confidently say that it is suitable for both watching sports and playing games. And indeed, it is. But what about movies that are most often recorded at 24 frames? Like most of the TVs we tested with a refresh rate of 120 Hz and higher, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in movies – you can set the image to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight “jump” in frame rate (lower settings). Additionally, there is a function called "Motion Blur Reduction," which reduces blurring – and this is a very useful feature, especially when watching sports.

TCL P8K is one of the cheapest televisions offering a 144 Hz refresh rate, which in itself is already a significant advantage in this price segment. Thanks to the fast panel, this model can confidently be recommended to both sports fans and video gamers – the image is smooth, and movements of the ball or dynamic actions look natural. However, this does not mean that the P8K is only suitable for sports. On the contrary – it can maintain the right dynamics in movies as well, without introducing an artificial effect of "theatricality," as long as we set the parameters wisely. The television is equipped with a motion smoother called "Motion Clarity," which features two sliders: blur reduction and flicker reduction. The first is responsible for smoothing the image by generating additional frames, which increases fluidity but may cause a slight soap opera effect. The second, on the other hand, limits flicker and improves sharpness in motion, although it may slightly darken the screen. Appropriately adjusting these two parameters allows for a really good balance between natural movement and fluidity. The 60 Hz panel is good for dynamic content, although more demanding users will notice that it is not a top-tier display in terms of motion clarity.

The PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. It features VRR, ALLM, and also includes HGiG implementation, which helps set up HDR in games as the developers intended. The TV supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you’re playing on Xbox, PS5, or a PC, everything works as it should. There is also a simple Game Bar, which is a special menu for gamers that allows you to quickly check if the ALLM mode is indeed functioning in the lowest latency setting.

And of course – Ambilight TV. Let's be honest – without LEDs on the back, it’s not a true gaming device. 😉 The multicolored backlighting can really enhance the atmosphere, especially in the evening. It may not be to everyone's taste, but younger gamers will be thrilled – because it simply looks impressive.

Although the TCL P8K is a budget TV, it certainly can’t be said that it’s not suitable for gaming. On the contrary – this is a screen that can pleasantly surprise any gamer. It features two HDMI 2.1 ports, allowing us to easily output 4K at 120 Hz. For those gaming on PC, they will also appreciate the fact that the TV can even operate at 240 Hz refresh rate in lower resolution – a small thing, but it’s nice. In addition, there’s a full set of gaming-specific features: automatic game mode, Game Bar for quick parameter previews, VRR, HGiG, and support for Dolby Vision in games. All of this makes gaming on the P8K a truly enjoyable experience – the picture is smooth, the response is quick, and the TV communicates well with next-gen consoles. The TCL P8K shows that a cheap screen doesn’t have to mean giving up fun. Definitely not when it comes to gaming.