PHILPS PUS9060 vs TCL C69K / Q6C

The One is bright enough to enjoy movies recorded in HDR format. The average brightness of this model is about 500 nits, so we can count on a pleasant viewing experience for movies from streaming platforms without any issues. Of course, it could always be better, because when it comes to brightness, there is never too much for this type of content. Unfortunately, a disappointing surprise may be the DCI-P3 color gamut coverage offered by the PUS9060. Although the manufacturer boasts about using a QLED filter here (it’s actually PFS LED), it's hard to talk about any positive effects of its operation. 85% DCI-P3 color gamut coverage is definitely not a level to brag about in 2025 – especially in a television advertised as QLED.

In terms of brightness, TCL C69K / Q6C is a moderate model. Under optimal movie conditions, it shows its full potential, reaching a maximum of around 600 nits. In scenes with large, intense light sources, the HDR effect can be truly satisfying, providing a cinematic sparkle. However, it should be noted that when managing the backlight zones, there are situations where some elements of the image become dimmed, and sometimes they are barely visible. This suggests that there is still a lack of proper optimization of algorithms, though considering the technical parameters in this price range, the construction still looks very good.

We tested the PUS9060 in the best factory mode it employs – of course, we’re talking about movie mode. Unfortunately, the best in this case doesn’t mean good. The picture in this mode was distinctly yellowed and leaned towards orange tones. The white balance on this TV was definitely too warm, resulting in an artificial, somewhat "sun-kissed" look for the entire scene. This directly translated to significant color errors, which in the worst cases exceeded a delta E value of 6 – thus, they were visible to the naked eye. The situation was the opposite in HDR mode, where the picture became too blue and too cold in appearance. Additionally, there was a slight increase in brightness – the gamma curve and EOTF suggested that the TV slightly brightens the image, which was also evident in the comparison photo below.

The Filmmaker mode, which has arrived in this year's TCL televisions (including the C69K / Q6C), is definitely the best choice "to start with." This is the mode we recommend for everyday viewing of movies and series. Unfortunately, as is often the case, best does not mean perfect. In SDR content, the image turned out to be too warm, with a strong red tint in the white balance. We had the opposite impression with HDR content – here the image became cooler than it should have, due to an excess of blue color. Additionally, the brightness characteristics sometimes resulted in overexposure. In practice, this translated to quite noticeable errors in color tests, which is hard to accept in a mode labeled as “by the creators.”

Thanks to calibration in movie mode, we managed to completely eliminate the yellow-orange hue, which significantly improved the reception of the entire scene. The image has become much more visually pleasant, although it still falls short of reference settings. It may now appear slightly bluish, but it is still a significant improvement compared to the factory settings.

Unfortunately, we could not significantly improve the brightness characteristics, but that is more about the construction of the TV itself – the lack of local dimming limits the possibilities for precise brightness management. The PUS9060 simply cannot dynamically adjust luminance like more advanced models do. Nonetheless, after calibration, the overall reception is much more enjoyable, especially in film materials.

Through white balance adjustment, we were able to significantly reduce the tendency of C69K / Q6C to distort colors, which resulted in a very good final outcome. After calibration, the issue of excessive warmth in SDR scenes and overly cool images in HDR disappeared. However, it is worth closely analyzing brightness characteristics. While there are few complaints about SDR content - the image looks really good, especially in older movies, TV programs, or on YouTube - the situation is much worse with HDR content. Analysis of the EOTF curve suggests that everything is fine, but in practice (EOTF in films), the limitations of the design become apparent. This model tends to excessively brighten small parts of the frame, while in other situations it dims the entire scene too much. The effect of calibration is undeniable, and in terms of color accuracy, C69K / Q6C gains a lot. Unfortunately, certain limitations resulting from local dimming management simply cannot be overcome.

In the PUS9060, we find the latest version of the image processor called P5 Perfect Picture, which is designed to improve the picture - especially the imperfect ones. The TV features a distortion reduction function, which smooths out tonal transitions, that is, those "color joins" mentioned earlier. And this function does so very effectively - there is no strong color gradation, but unfortunately, it works aggressively enough that it sometimes dims desired elements, such as material textures or film grain. So this can be considered a compromise. We would not recommend using this function for movies, but for more casual content - such as YouTube or regular television - absolutely.

The P5 processor also improves the quality of lower resolution images, and it does this quite effectively. The test image with the model is very soft - sometimes even too much - but this can be easily adjusted with the sharpness slider to match personal preferences. It is also pleasing that the TV does not cut off edges in SD content - which unfortunately still happens in some TV models.

In terms of image scaling, TCL C69K / Q6C performs quite well. Lower quality content is displayed acceptably, and thanks to the lack of overscan issues, the image is presented in full without any cropping. However, one shouldn't expect miracles – very low-quality materials won't gain a new life here, as the image processor has its limitations.

On thin lines and details, one can see characteristic jitter, indicating a lack of more advanced image enhancement algorithms. It's also a pity that the C69K / Q6C lacks the function for smoothing tonal transitions. As a result, in older movies or video materials, color banding can be noticeable and may become distracting during longer viewing sessions.

PHILIPS PUS9060 is equipped with a 4K display with a 144 Hz refresh rate, so we can confidently say that it is suitable for both watching sports and playing games. And indeed, it is. But what about movies that are most often recorded at 24 frames? Like most of the TVs we tested with a refresh rate of 120 Hz and higher, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in movies – you can set the image to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight “jump” in frame rate (lower settings). Additionally, there is a function called "Motion Blur Reduction," which reduces blurring – and this is a very useful feature, especially when watching sports.

The use of a 144 Hz panel in TCL C69K / Q6C is a significant advantage in this price range. It represents an important step forward compared to its predecessor (C655 PRO), which only offered 60 Hz at 4K. The difference is particularly noticeable when watching sports or playing games – the ball, players, or dynamic action in games are displayed more clearly and without losing details. An interesting feature is also the ability of the panel to operate at 240 Hz (which the manufacturer does not officially mention) – we will return to this topic in relation to the PC gaming mode. TCL has also added a feature for movie fans: “Motion Clarity.” This allows users to adjust the picture to their preferences using two simple sliders. We can either keep the visible film frame or opt for very smooth, "

The PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. It features VRR, ALLM, and also includes HGiG implementation, which helps set up HDR in games as the developers intended. The TV supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you’re playing on Xbox, PS5, or a PC, everything works as it should. There is also a simple Game Bar, which is a special menu for gamers that allows you to quickly check if the ALLM mode is indeed functioning in the lowest latency setting.

And of course – Ambilight TV. Let's be honest – without LEDs on the back, it’s not a true gaming device. 😉 The multicolored backlighting can really enhance the atmosphere, especially in the evening. It may not be to everyone's taste, but younger gamers will be thrilled – because it simply looks impressive.

TCL C69K / Q6C is a television that can boldly be called equipment created with gamers in mind. Here we have 4K at 144 Hz, VRR support, automatic game mode (ALLM), and Dolby Vision Gaming. Additionally, there's a practical Game Bar, which is a panel with the most important settings right at hand – useful when we want to quickly change something during gameplay (e.g., aspect ratio: Yes, it’s possible!). The wide range of VRR, reaching up to 240 Hz, is noteworthy. This option is primarily for PC gamers who will lower the resolution below native 4K. In that case, the TV can spread its wings and show additional smoothness, especially in fast esports titles. For consoles, we stick to the classic limit of 120 Hz, but the possibilities are still quite broad. The only drawback is slight motion blur that can sometimes be seen in dynamic scenes. Other than that, C69K / Q6C offers everything gamers expect from a television.