Hisense E7NQ PRO vs TCL C655 / C69B 98'

Based on the luminance chart, which indicates around 550 nits, it can be considered that Hisense E7NQ PRO theoretically has the potential to somewhat "enchant" us with its HDR image. While testing various scenes, we noticed that the TV continually tries to balance maintaining adequate brightness and preserving the deepest blacks. In favourable conditions – for instance, during a scene from "The Meg," where the screen is flooded with bright light – this brightness impresses. At such moments, we feel that HDR actually adds that "something" to the image. Unfortunately, when more challenging shots appear on the screen with small, bright elements against a dark background, the situation looks much worse. The brightness then drops to 200-300 nits, too little to distinguish HDR from regular SDR.

It's clear that the TV is trying, but hardware limitations – primarily the small number of local dimming zones – prevent it from fully spreading its wings. The result can therefore be quite uneven and just as average as in the contrast tests. However, it deserves credit for the impressive coverage of the DCI-P3 colour gamut at 97%. This allows the TV to showcase a wide range of colours, which, in the right scenes, can give us at least a taste of the true HDR effect. It’s a pity that the overall experience isn’t complemented by better brightness and contrast.

The quality of the HDR effect on TCL C655 / C69B looks quite promising. The average value in test patterns is about 450 nits, which already allows you to feel the brilliance of light effects and better image dynamics. However, as previously mentioned, this effect can be somewhat muted by slight differences in bright and dark colors, resulting from the lack of local dimming technology. However, the coverage of the DCI-P3 color palette at 94% deserves high praise, and this is possible due to the use of a quantum dot (QLED) matrix. As a result, colors are vibrant and well-reproduced when watching HDR content.

When we took our copy of Hisense E7NQ PRO out of the box, we immediately started checking the available picture modes. Among them, the Filmmaker mode seemed the most promising, although it was not without flaws. With standard SDR content, we noticed a clear tendency for an excessive boost in red, which caused the image to appear unnaturally warm. This is particularly evident in the comparison photo included below. On the other hand, when we switched to HDR content, the situation went in the opposite direction. This time blue was dominant, and red was scarce, giving a cool effect, at times even a somewhat "store-like" impression — although not as drastic as in those modes that are actually intended for displaying in exhibitions. As a result, in our colour reproduction tests, these imbalances in colour balance led to significant errors.

Additionally, the TV had issues with rendering brightness characteristics. At lower resolutions, it clearly brightened the darkest elements of the image, and with HDR content, the brightness curve (eotf) did not want to align as it should. Initially, the TV excessively darkened the smallest details and then overly brightened larger areas. Fortunately, the E7NQ PRO provides us with plenty of calibration tools, so knowing the potential, we decided to take matters into our own hands and try to set it up to eliminate these issues.

The TCL C655 / C69B TV offers a movie mode that has been tested for color reproduction quality. Although this mode is called movie mode, it unfortunately has quite a few flaws that a director would certainly not want to see when recording their work. Starting with image analysis, it's worth looking at the white balance – both in HD and 4K HDR content, the white balance has significant errors. In both cases, the red color dominates, which makes the colors too warm, and the overall image takes on a pink or yellow tint. The Colour Checker test confirms these errors – the color samples shift to the wrong shades, affecting overall color fidelity. A lesser issue is the brightness characteristics. However, it is also not without flaws. The gamma chart shows a strong spike at the beginning, which can make the image excessively bright, and the EOTF curve responsible for brightness in 4K HDR content also has significant fluctuations – it is evident that the TV tries to maintain appropriate brightness, but it does not always succeed effectively.

Thanks to the tools available in E7NQ PRO, we managed to squeeze a quite decent image out of it, especially in the case of lower-quality content. After fine-tuning the white balance of the SDR materials, the colours look much more natural, and what we see on the screen seems closer to the vision the manufacturer intended to present. Additionally, we improved the brightness characteristic (Gamma), causing the TV to no longer have a tendency to over-brighten, and everything looks significantly better than before our intervention.

In HDR materials, we also managed to achieve some results, although it is not as rosy here. Indeed, the white balance has approached an acceptable level, but the problem lies elsewhere. It concerns the EOTF curve, which is how the TV manages the brightness and tonality of the image. At first glance, it might seem that the biggest issue pertains only to the mid-tones of the image, which are overly illuminated. However, after more detailed testing and enabling filters to display the EOTF curve, it is evident that the receiver tends to brighten the entire screen. This appears to be a limitation arising from the small number of local dimming zones and generally modest brightness management capabilities. Such hardware limitations are simply insurmountable. After our calibration, however, the image is noticeably better than at the start. One just needs to be aware that in terms of contrast and brightness management, this model has its limits, which even good calibration cannot fully overcome.

After calibrating the movie mode of the television TCL C655 / C69B , the white balance has been adjusted, and the colors appear as they should – which is confirmed by only slight deviations in the Colour Checker test. The gamma is really good, which means the television shouldn’t have issues with brightness in low-resolution materials. Unfortunately, a similar EOTF characteristic is still noticeable, which is a natural phenomenon in televisions that do not have local dimming – they simply struggle to "shine" brighter in a given part of the screen. Despite this design limitation that cannot be bypassed, we recommend adjustments in the settings because the overall color presentation is really very good.

Unfortunately, the "smooth and gradient image" feature in Hisense E7NQ PRO does not impress when it comes to smoothing tonal transitions in lower-quality materials. At the lowest setting, the change is hard to notice—it's more of a cosmetic improvement. Switching to "Medium" mode already provides a noticeable effect, but it still isn't anything special. In addition, the television starts to excessively interfere with other image elements, which can look unnatural.

Image scaling is also rather average. On the test screen, where a portrait of a model and text are displayed, slightly jagged edges can be seen, which makes the overall presentation less smooth and aesthetically pleasing than we would expect in this class of device. It's simply hard to speak of truly effective enhancement of lower resolution quality here.

The TCL C655 / C69B TV handles tonal transitions well in lower-quality content. The "Gradual Smoothing" feature at its lowest setting effectively eliminates visible banding, but it also results in a loss of detail, such as in the texture of objects. A plus is that it does not interfere with film grain, allowing the image to maintain a natural look.

In terms of digital processing, the TV adds a considerable amount of artificial sharpness, which may appeal to those who prefer a vivid image. For those who prefer a more subtle representation of details, this could be a drawback. Another downside is the rather aggressive overscan – the image is cropped, which leads to the loss of parts at the edges and limits the field of view.

Thanks to its 144 Hz panel, the E7NQ PRO performs excellently with almost every type of content. Whether we are watching fast-paced matches, dynamic games, or action movies, the fluidity of motion leaves a good impression. For movies, the manufacturer has equipped the TV with two key tools: "motion blur reduction" and "judder reduction." Each of these functions can be adjusted on a scale from 1 to 10.

At lower values, the processing is subtle, barely noticeable, and gently smooths motion without ruining the cinematic character of the image. The higher we move up the scale, the more clearly the TV intervenes in the presented material, smoothing motion more forcefully, thus minimizing any stutter or micro-cuts. On the other hand, the highest settings may resemble the so-called "soap opera effect," which makes the image look overly smooth, losing some of its cinematic atmosphere. However, with such a scale, we can find the golden mean, adjusting the fluidity of motion to our own preferences.

Unlike the smaller versions, the 98” model stands out with significantly better motion fluidity. Instead of the standard 60 Hz, this colossal screen is equipped with a full-fledged 144 Hz matrix, which opens up completely new possibilities – both for gamers and movie enthusiasts. With full motion smoothing, the TV provides incredible image fluidity, eliminating motion blur and improving the viewing comfort of dynamic scenes. It is worth emphasizing that this technology operates across the full refresh rate range, meaning there is no need to compromise between fluidity and quality. Additionally, the "Flicker Reduction" feature allows you to adjust the fluidity to your own preferences – you can opt for a more cinematic effect with visible frame drops or a maximally smooth image.

If you enjoy switching on your console and immersing yourself in games for hours, the E7NQ PRO is sure to make a strong impression. With its 144Hz refresh rate, gameplay feels impressively smooth, while support for HDMI 2.1 and VRR prevents screen tearing, even during the most action-packed moments. Additionally, ALLM automatically applies the lowest latency as soon as you switch to your console, so there’s no need to tweak the settings manually.

A major plus is the ability to play games in Dolby Vision, enhancing colours and contrast for a more vibrant experience. Hisense has also included a user-friendly game bar, allowing you to monitor key performance stats and adjust settings without leaving the game. The only real drawback is the absence of HGIG support. While not essential, some gamers may miss it if they’re looking for the most accurate representation of a game’s intended visuals. That said, in practice, the E7NQ PRO delivers an excellent gaming experience that’s smooth, responsive, and enjoyable.

The 98-inch TCL C655 / C69B is excellently equipped for gamers. Full-fledged HDMI 2.1 ports and a 144 Hz panel allow you to enjoy games in 4K resolution at 120 Hz, providing smoothness and responsiveness that will impress even the most demanding.

The TV supports Variable Refresh Rate (VRR), which eliminates screen tearing, and the Automatic Low Latency Mode (ALLM) ensures that games start instantly, without the need to manually switch settings. There’s also support for Dolby Vision and HGiG, making the image quality in games even better - details are sharp, colors natural, and contrast perfectly balanced.

Additionally, the TV offers a dedicated gaming panel that allows for quick adjustment of image settings without having to leave the game. It’s a device that meets practically all the requirements of the modern gamer.