Samsung OLED S90F (QD-OLED) vs Blaupunkt UGC5500S

The biggest difference between the 65-inch S90F and the other versions is brightness. The QD-OLED panel can reach up to 1700 nits in laboratory tests, which is over 500 nits more than the version with a WOLED matrix. This translates to a significantly stronger and more immersive HDR effect. In most scenes, the bright parts of the image look stunning, and we must admit that we were positively surprised, as we expected results closer to the WOLED version, but what we got is an effect that impresses even in films. As with every OLED, there are moments when the panel must reduce brightness a bit. This mainly concerns full-screen, very demanding scenes – for instance, in the last test scene from the movie “The Meg,” brightness drops to around 800 nits. However, it's hard to consider this a flaw because it's still an excellent result, unprecedented in OLED TVs in this price range. Everything suggests that the 65-inch S90F could be one of the best choices this year for those looking for a strong OLED at a reasonable price. Another advantage of the QD-OLED matrix in HDR content is its colour gamut coverage. Thanks to quantum dots, the television achieves nearly 100% of the DCI-P3 gamut and almost 90% of the BT.2020 gamut. These are values that place it alongside much more expensive models and make it exceptional in its class.

We won’t beat around the bush here – if you’re looking for a TV strictly for cinematic HDR experiences, then you’ve come to the wrong place. Unfortunately, the Blaupunkt UGC5500S is not a machine built for such challenges. This is primarily due to its very low brightness, which we measured during our tests. A result of around 250 nits on movie screens speaks for itself. It’s simply too little to even consider any real HDR effect. To be honest, everything displayed in this format can confidently be seen as a somewhat “enhanced” SDR mode. We expected this, as practically every device in this price range falls short in this area, but we feel it’s our duty to warn you. Manufacturers love to brag about HDR compatibility on the boxes, but in reality, this format simply doesn’t exist here – it lacks the “fuel” in the form of brightness.

The situation is further complicated for Blaupunkt, as we’re dealing with a panel that has very basic coverage of the DCI-P3 colour gamut, reaching only about 80%. You won’t find any advanced coatings to expand these capabilities (like quantum dots), which means scenes that are supposed to burst with richly saturated colours appear simply underwhelming on this screen. Therefore, we have a particular piece of advice for you: don’t force HDR mode on this model. If you have the option in the streaming app settings – just turn it off. By sticking to the classic SDR mode, you’ll be sure that the TV won’t try to “enhance” something that it can’t handle hardware-wise.

Samsung S90F, like most modern televisions, offers several picture modes, but in keeping with our tradition, we checked it in the most important one, which is Filmmaker. This setting makes the picture look much more natural than in the default, often oversaturated modes. It is neither overly vivid nor artificially dimmed – just closer to what you should actually see. However, this doesn’t mean it’s perfect. The S90F had noticeable shortcomings in white balance, particularly in the blue range, which created a slightly yellowish filter effect on most scenes. One might argue that it looks more “cinematic” because it’s warmer, but let’s not kid ourselves – George Lucas didn’t shoot Star Wars in sepia 😉 (you’ll find a comparison with a scene as always below). In HDR materials, there was also an issue with brightness management. The EOTF curve clearly showed that the television brightens the image more than it should, which led to some effects looking too intense and deviating from the reference. Fortunately, many of these flaws can be eliminated through professional calibration – we will discuss the effects of this procedure later in the test.

We also took a close look at how Blaupunkt handles colours in movie mode, and here the matter is, to put it simply, twofold. We must once again clearly separate what we see in the standard SDR format from what happens when HDR is switched on, as they are two completely different worlds. Let's start with the better side of the coin. If you're planning to watch traditional TV, YouTube, or older films on this television, you can count on really well-tuned colours. In our test sample, the white balance in movie mode performed exceptionally well, which honestly surprised us. Of course, to avoid being too rosy, we noticed some drawbacks. Looking at the gamma charts, we observed that the processor struggles with properly dimming the image in its brightest areas. Additionally, there is quite a strong, at times overly aggressive, red saturation, which resulted in visible errors in reproducing certain shades. Despite this, overall, the image in SDR is simply solid and watchable without a grimace on your face. Unfortunately, the magic fades when we re-enter the world of HDR. Here, Blaupunkt behaves as if we suddenly switched it to store mode, and in its worst rendition. The excess blue in the white balance is so significant that it’s glaring, ruining any realism in the scene. Furthermore, the television interprets brightness very loosely, which, upon analysing the EOTF curve, clearly showed that for most of the time, colours simply appear washed out and lacking depth. This is also perfectly evident in the colour errors that become apparent in this mode. Once again, we are left with the same conclusion: Blaupunkt in SDR mode looks significantly better and more natural than in HDR, which seems to be forcefully added without proper refinement.

Calibration quickly revealed that the S90F has a significant reserve of capabilities. The image in SDR immediately gained a natural quality – classic films no longer looked like someone was applying a yellowish filter, and the colours regained their proper character. It's a return to the atmosphere of the original, without the impression that someone tried to "age" it forcefully. In HDR content, the difference was even more pronounced. The EOTF curve was managed to nearly reference level, and any deviations are so subtle that most viewers wouldn't even notice them. In practice, the S90F shows an image very close to ideal post-calibration. Compared to the WOLED version, it even performs better – mainly due to a wider coverage of the colour palette, which makes the colours look fuller and more vibrant.

It may sound like a joke – pulling out professional measuring equipment for a TV that costs around a thousand złoty / 250 dollars, but we wouldn’t be ourselves if we didn’t check it. The question is: does such cheap gear give us any leeway in terms of calibration? To your surprise, the answer is: yes, absolutely. In the Blaupunkt UGC5500S menu, we found surprisingly many options that allowed us to effectively work on the picture. These aren't just empty sliders; these are concrete tools that enabled us to make use of our measurement sensors and software. In SDR mode, the effects were visible to the naked eye. We successfully eliminated the problem we mentioned earlier – that excessive, almost artificial saturation of reds. We also fixed the issue with the incorrect dimming of the brightest parts of the image. After calibration, the picture in standard format became significantly more balanced and simply correct. When it comes to HDR, the situation was more complicated again. While we managed to “tame” that aggressive blue tint in the white balance, it was clear that we were fighting a bit of a losing battle. Even after changing the settings, the TV still tried to interfere with the picture in its own way, as if the electronics knew better than we did how the scene should look. To top it off, there's the hardware barrier that no slider can overcome – colours in HDR still remain undersaturated. This simply results from the quality of the panel itself; it physically cannot produce the most vivid colours. To summarise this point: if any of you ask whether it’s possible to calibrate a TV for “a grand”, we respond with complete conviction: it is possible.

S90F performs really well here, although there are some points that are common across most Samsung TVs. The noise reduction feature can effectively smooth out unwanted colour transitions in lower-quality materials like television or YouTube, making them look simply better. However, it should be noted that it works quite aggressively and can also soften elements that we wouldn’t want to alter, such as facial details. Therefore, if we want to use it, it’s best to use it in the "medium" setting and be aware of the compromise it brings. The upscaling itself is of a high standard – low-quality materials are pulled towards an image resembling 4K. The only caveat is that the S90F can still have issues with so-called overscan, meaning slight trimming of the edges in very low-quality materials such as 576p and lower.

If you're hoping that the processor in this model will magically "fix" the poor quality signal from your cable TV or old movies from YouTube, we must disappoint you. The capabilities of this television end at absolutely basic upscaling, which is simply stretching the image to a higher resolution. It does this correctly in that the image is not blurry, but there is no mention of any intelligent sharpening or adding details. Worse still, Blaupunkt is completely devoid of any functions to reduce unwanted tonal transitions. If the material being viewed shows what is known as banding (ugly "steps" instead of a smooth transition of colours, e.g., in the sky), this television will display them in all their glory. Additionally, the television has a tendency to slightly crop the edges of the image. Instead of displaying 100% of what the source sends, Blaupunkt slightly zooms in on the frame, causing us to lose details that are at the very edges of the screen. In summary: in the category of digital "enhancement" of the image, Blaupunkt simply performs poorly. We receive a raw, unprocessed signal, with all its flaws.

S90F is an OLED with a refresh rate of 144 Hz, but in practice, what matters most is how it performs at 120 Hz, as this frequency is the most important when watching sports. The QD-OLED panel is no different in this regard from WOLED panels – the pixel response is nearly instantaneous, so motion is rendered with surgical precision. The effect is easy to predict. The image is practically free of motion blur, making gaming on consoles, matches, or other sports broadcasts a tremendous pleasure on the S90F.

Fans of movies and series have not been forgotten either. Like every Samsung television with a refresh rate of 120 Hz and above, the S90F is equipped with a proprietary motion smoother called “Picture Clarity.” Here, we find two sliders – blur reduction and judder reduction – which allow you to improve the smoothness of content recorded at 24 frames and tailor the effect to your own preferences.

When it comes to motion fluidity, Blaupunkt has nothing to defend itself with. A 60 Hz panel at this price is standard, so none of us expected a perfectly sharp image in fast action scenes or during a match. However, the biggest drawback of this model is that you won’t find any digital motion smoothers in the menu. The manufacturer hasn’t given us any room for manoeuvre – nothing can be smoothed out or the image adjusted to our personal preferences. The picture is always "raw" and we receive it exactly as it is transmitted by the source. For fans of cinematic "jumping" images, this might be good, but the rest simply has to get used to the lack of any motion enhancement.

The S90F is a television that genuinely brings a lot of joy when gaming. To start with, we get four proper HDMI 2.1 ports, which means you can connect all consoles and PCs without having to figure out which device takes priority. This is a convenient and practical solution, which is not at all a given with other manufacturers. Additionally, there are key features such as: automatic game mode (ALLM), which automatically switches the screen to low latency settings, and VRR frame synchronization that operates over a wide range from 48 to 144 Hz. This ensures the picture remains smooth, whether we're playing fast-paced online shooters or more relaxed narrative titles. The Game Bar also deserves attention – a panel that allows quick access to several handy extras. For example, you can turn on an extra crosshair in the middle of the screen, enlarge the minimap, or, in the case of PC, change the aspect ratio. Finally, there's also Samsung's unique Game Motion Plus mode. Its task is to smooth out older or poorly optimized titles, and it actually works quite well. With this mode, even less polished games can look better and provide more enjoyment than on other televisions that theoretically offer the same technical parameters.

When it comes to gaming on the Blaupunkt, we weren’t expecting miracles and indeed – the list of features isn’t very long. However, there are two interesting points worth mentioning, as they might be significant for some of you at this price. The first advantage is that the TV quite smoothly detects the connected console. Thanks to the ALLM (Auto Low Latency Mode) feature, the device knows when you start gaming and automatically switches to low latency mode. This is convenient because you don’t have to fiddle with settings every time to ensure input lag doesn’t spoil the fun. The second point is a real curiosity that surprised us. Despite it being a 60 Hz panel, the Blaupunkt can display a 120 Hz image at Full HD resolution. Sure, we lose 4K details, but for those playing more dynamic, online shooters where smoothness is more important than resolution, this is a really nice and unexpected addition in such an affordable device. Other than these two points, you won’t find anything more here. There are no advanced smoothness enhancement systems for gamers or extensive gaming menu bars. It’s a simple screen for occasional gaming.